Question about Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum

1 Answer

Dark marks on carpet after using hoover

I am getting dark coloration on my carpet after using hoover suprememe windtunnel.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

These dark marks are burn marks from the beater bar itself. most walmart, kmart, and target shelf vacuums from hoover, dyson, and any cheeper vacuum has a hard bristle system. I've noticed even on the high end hoovers as well that they do the same thing. the best way to save your carpets is to see if there is a replacement beater bar that can be substituted for your vacuum. i dont know what style of beater bar that particular one is but check with your local vacuum repair center to see if they have something with softer brushes you can use insted otherwise i would recommend a new vacuum with softer bristles. usually something that is half as stiff as what is already on yur unit. you culd also try lifting the hight setting as a temporary solution.

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover self-propelled windtunnel U6430-900 flat belt gets hot & becomes hard to push. It has a filter bag. Purchased 8/2/01. Took one plate off bottom. Used a compressor to blow out dirt & dust. ...


Belts get hot when fibers from carpet get wound arounf the belts mounting shaft. Best to take a razor and cut off any fibers so the belt doesn't get hot again

Aug 10, 2010 | Hoover Self-Propelled WindTunnel Bagless...

1 Answer

Hoover U5780-900 Windtunnel Cyclonic Bagless


You probably need to change the belts. Here are the belts you need and the manual:

Hoover 5780-900 Belts

Manual

Dec 22, 2009 | Hoover U5780-900 Windtunnel Cyclonic...

1 Answer

How do I fix the carpet/floor switch on a hoover windtunnel bagged self propelled


The carpet / floor switch is a mechanical assembly. the bottom cover needs to be removed to expose the screws for the hood cover to be removed. then the switch can be accessed for repair

Oct 04, 2009 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Beater bar


There may be a shutoff switch, located on the hood, that shuts off the agitator to permit bare floor cleaning. Return the switch to carpet mode.

Sep 29, 2009 | Hoover U6437-900 / U6439-900 Windtunnel...

2 Answers

Hoover 5470-900 no longer contacts carpet with beater brush


your floor adjustment spring is broken there is a plastic slider and clip if it is broken the height adj will not work you should get a new vacuum because this repair can cost as much as a new vac.also this is a common problem with the hoover brand I would get a sebo or an oreck they have a great warrentty and you will more than likly never buy a other vac.

Jan 24, 2009 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Hoover Windtunnel


the gears inside might be worn down.

Aug 25, 2008 | Hoover U8147-900 WindTunnel V2 Bagless...

1 Answer

Self-Propelled WindTunnel by Hoover U6445906


· Sometimes grabs the carpet for no reason.
· Comes back too fast when I push it back.

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
Self-Propelled WindTunnel by Hoover U6445906 Without knowing the brand name or model number you may have the height adjustment to low and the vacuum will say “bite down” on the carpet of which will make the belt burn and might leave marks on the carpet – and if you have a self-propelled vacuum it does come back fast if you because you have a transmission just like a car and you have to control the speed of the vacuum or because it may have a weak belt the vacuum will pull back easier – I really would like to know the brand name and model number so that I could accurately give a better answer . Recommended belt change for flat belt(s) are 4 to 6 months for better cleaning and one a year for a geared belt – both can stretch and lose their cleaning function

Apr 05, 2008 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Dog hair from vacuum is being laid back onto carpet


my plush carpet and dog hair do not go together! I realized with this particular model and in my environment, the bag fills in one vacuuming! I literally dug out all the dirt I could by taking it apart and then changing the bag. Voila!

Mar 31, 2008 | Hoover WindTunnel Widepath U5397 Vacuum

1 Answer

Hoover windtunnel


would suggest the drive belt is stretched and thus is slipping when contact is made with the carpet.

Jan 14, 2008 | Hoover U6437-900 / U6439-900 Windtunnel...

Not finding what you are looking for?
Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...