Question about GE 13R100T 13" TV

Open Question

Model # 13 TVR 72

The power button blink, TV will not turn on

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. Can you please tell me the correct code for the Curtis tv for Cablevision Remote? We have two remotes now, the cable remote cannot operate the volume or the power on/off tv, must use Curtis remote.....


Hello
Codes for Curtis TV with Cablevison remote control are:-

070 004 101 127 236 011 072 081 120 164

*Tip: The iO button will light on for 20 seconds. The

next step must be entered while the iO button is
on.

STEP2 Press the [INFO] button.

The iO button will blink number of times indicating the

number of each digit of the code number. Each digit is

separated by a 1 second interval of the iO button being

turned off.

Example :One blink, three blinks and eight blinks with

an interval of 1 second of iO button being

turned off, indicates the code number 138.


Note :Ten blinks is equal to the number 0.


D. Program the Volume Controls.

By following the steps below, the user can program

the volume controls (Volume UP, Volume Down and

MUTE) . The default volume control settings on the

remote control is TV volume control. If you wish you

can control the volume via your CABLE box, use the

following steps.

STEP1 Press the [CBL] button and the [SEL] button

simultaneously for 3 seconds. The iO button

will turn on.

*Tip : The iO button will light on for 20 seconds.

The next step must be entered while the

iO button is on.

STEP2 Press the [VOL +] button.

STEP3 Press the [CBL] button.

The iO button will blink twice to confirm the

programming.

To return to original state:

If you wish you can control the volume via your TV,
repeat the above steps by pressing [TV] in STEP3 .
OK.

Dec 23, 2010 | Curtis CM13102 13" TV

1 Answer

I need the dish network remote code for the durabrand 13" tv


Turn ON the electronic device you want to program the remote to control.
Press the TV Mode button on the remote until the appropriate mode light is flashing.

Press the Power button. The mode light will stop flashing and stay lit.
Press the Up or Down arrow button to set the remote to the next code. The Down arrow button scans backward and the Up arrow button scans forward.
When the correct code is reached, the device (whether a TV, VCR, or other) will turn off.

Press the pound key button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times.
Turn the device back ON by pressing the Power button.
Press sat mode key once you power back on the tv to be able to operate the receiver box.
Try some other functions to make sure you have the correct code. Occasionally the Power button may work when others do not.
If the other buttons work you are finished.

.
If the other buttons do not work, repeat the previous steps. The scan will resume from the last code stored.
The mode light will flash rapidly when the scan has returned to the starting point and all codes have been tested for that mode. The remote control may not control some device models.

Jun 24, 2010 | Durabrand BH1304D 13" TV

1 Answer

Need code for universal remote rcr312w to program it for magnavox 13 inch tv


hold down the program tv button till blink, then click the power button till tv comes on,then push set

Feb 12, 2010 | Standard (CRT) Televisions

1 Answer

Disney DTD 363-Car 13" tv/dvd


I have xfinity Comcast cable connected to my Disney's CARS TV/DVD combo. I did not have a remote for it because I bought it at yard sale without it. I used Comcast's remote control. I followed their "Searching For Your Code" instructions. #1-turn on your TV. #2-hold SET till red lite blinks twice. #3- enter 9-9-1. The red lite blinks twice. #4-press nd release the CH+ key until TV turns off. #5-once it turns off press SET key nd red lite will blink twice. #6-Now u have locked in ur code. Press power and TV should turn on. Then CH+,CH-,VOL+, and VOL- should work for ur TV.

Apr 16, 2009 | Disney DTD1363-CAR 13" TV/DVD

1 Answer

Disney 13' Princess tv


You've tried all the codes for your TV, but you still cannot get the remote control to operate your TV.
  1. Turn on your TV.
  2. On the remote control, press TV once.
  3. Then press and hold SETUP until the TV key blinks twice, then release the SETUP key.
  4. Using the number pad, enter 9-9-1. The TV key will blink twice.
  5. Aim the remote control at the TV and slowly alternate between pressing Power and TV. Stop when the TV turns off after pressing the POWER key. This means that a working code has been found.
  6. Press the SETUP key once to lock in the code. The TV key will blink twice.
Hope this helps

Jan 16, 2009 | Disney 13" TV

2 Answers

Code for p1300ntv to work with directv remote


You can "manually" find your code by  1. pressing tv button on the remote 2. press and hold setup until TV button blinks twice 3. press 991, the tv button should blink once 4. slowly press and alternate the power and tv buttons until tv turns off.   5. press setup to lock in the code when tv turns off.
hope this helps,  j 

Jan 14, 2009 | Disney 13" TV

1 Answer

My Sony Trinitron won't turn on...has 4 blinks in Standby.


Hello,
There are 3 reasons for 4 blinls
1.unit went to stand by mode because of h-pulse
2.Vertical defflection pulse stopped
3. power line is shhorted or power supply is stoped.

Solution:
1. check 13vdc on A board of powersupply stage
2. Check IC561 on A-board.

Good Luck
Dals123

Sep 08, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

No Power on Sony TV Model KV 36FS120


Hiii....

The sympthon 9 blinks :
Check at G board : D6301 D6116 ( replace with new one !!!! ).Voltage around +/- 12 -13 v .

Thank's

[Vrya]

e-mail : be_cek@yahoo.com

Mar 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

5 Answers

Daewoo Universal Codes for Comcast Remote


For Daewoo TV Model DTQ-27U4SC, try this for Comcast Universal Remote (one with the red select button):
1. Press TV button
2. Press Setup button until TV button blinks twice
3. Enter 10451
4. Press Power button (TV should turn off and is set)

Mar 01, 2008 | Daewoo DTQ-1440FC 13" TV

Not finding what you are looking for?
GE 13R100T 13" TV Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Standard (CRT) Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a GE Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...