Question about Vivitek V37835 46 in. LCD Television

2 Answers

VIVITEK 56" TV JUST ALL OF A SUDDEN SHUTS OFF, THEN RESTARTS ITSELF...THEN AF EW MINUTES LATER-SHUTS OFF AGAIN. RECENTLY REPLACED THE COLORWHEEL-SO ITS NOT THAT. HELP!

Posted by on

  • 3 more comments 
  • szeyes Oct 05, 2008

    Thanks....not being tech smart, WHAT are power module output terminals and where are they?

  • ml9448e Nov 01, 2008

    Just started, it began with a humming sound for a few week, then the tv stops and start then immediately stops again, then trys to strart, then stops again.

  • Anonymous Nov 01, 2008

    Television turns off every 2 minutes then cycles through error codes twice before coming back on for another 2 minutes. This goes on and on...

  • nabiscokid63 Nov 14, 2008


    1. I have the same problem, i don't think its the color wheel or the lamp, it might be the baluster which i hear controls the power going to the Fans and Color Wheel. There is a web site that a lot of tv repair shops order their parts from and you can order one or you can probably get it from the same place you got the color wheel. Can you give me the info on the store ?. Thanks

  • PATRICK BEVERLY May 11, 2010

    CAN YOU TELL ME WERE YOU BOUGHT YOUR COLOR WHEEL FROM?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This happened to mine and I got a tech at Vivitek, two years ago, to help me and found that the bulb was bad. I replaced the bulb and it has worked since. It is now time for a new bulb and that is why I was on hear and saw your question. The bulb is easy to change.

Posted on Jan 14, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 191 Answers

Check your power module output terminals for correct output

Posted on Oct 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv continuely shuts off


When it shuts down notice what light is lit , what color and is it solid or blinking. Respond to this same post for assistance and I will assist you with the issue.

Jan 01, 2013 | Mitsubishi WD-60737 60 in. HDTV

1 Answer

I need the Vivitek code for my TV Monitor so I can program the U Verse remote, please. Thank you bklein1999@yahoo.com


There is a search function on the remote that will search for the code. Press TV, hold set up till 2 blinks, then 991. From there press tv then power and repeat till the tv shuts off then press set up again. If this does not work then try contacting Vivitek

Mar 05, 2011 | Televison & Video

1 Answer

When I was watching TV today my Sony Bravia KDL-40V4100 just swutched off by itself. After 15 minutes or so it came back on by itself, I shut it off soon after. Later on today after watching TV for 15...


When tv it shutting itself off by it own does the tv power LED light indication flashes?Tv turn on now,the tv power light indication,just flashes?Yes,than ur tv power supply board is the causes and the problems.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Dec 12, 2010 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

2 Answers

Tv runs for about 3 minutes shuts off I can restart right away but 3 mins later it shuts itselfe off again


I had a similar problem with my Phillips 42 in. LCD HD TV.

Here's the problem. The Power Supply Board. I opened my TV up(warranty was up of course) and found several bad capacitors. Phillips and several other companies were sold capacitors that although were highly rated failed within 5 years because of a lack of preservatives. All sorts of electronic equipment is now being effected due to these defective capacitors.
Solutions?
1. Take it in and have it fixed
2. Open it up, check the board for faulty capacitors(bulged or leaking) Buy a new Power supply board and install it.
3. Remove PSB, remove faulty capacitors and replace with compatible new ones.

Hope this helps

Sep 19, 2010 | Toymax Magnavox 47MF437B 47 in. LCD TV

1 Answer

55" TV keeps shutting off automatically


Green light flashes 5 and then red light flashes 6

Sep 14, 2009 | Sony KDF-E55A20 55 in. LCD Television

1 Answer

The motor in my 51 inch tv has been really


Have a repair shop install a new colorwheel.

Aug 29, 2009 | Vivitek V37835 46 in. LCD Television

1 Answer

Set-up code for vivitek 30" model LT30PL1-A


There is a search function on the remote that will search for the code. Press TV, hold set up till 2 blinks, then 991. From there press tv then power and repeat till the tv shuts off then press set up again.

This can take a while and doesn't always work. You might check and see if Vivitek has a parent company ie owned by Sony or Panasonic and see if the codes for those work.

Oct 15, 2008 | Vivitek V37835 46 in. LCD Television

5 Answers

Vivitek tv


I have a 56" model that I have had a similar problem. My bulb burned out in <90 days. Warranty was 90 days on the bulb itself. When the TV picture goes out, the indicator LEDS blink on and off.

Here is what you have to determine:

1) First cover the left LED with a piece of paper so that you can't see it blinking. I don't know if your layout is the same as my TV. You may have to switch the paper blocking the LED.

2) Pay attention to the other LED and READ its' flashing code. In my case, the code was 2-3. It would flash 2 times, pause briefly, then flash 3 times. This meant code 23. That indicated the bulb was burned out.

3) If you look in the manual, It does have a code list of some sorts to tell you of the codes and their meanings. Hope this helps.

Nov 20, 2007 | Vivitek V37835 46 in. LCD Television

Not finding what you are looking for?
Vivitek V37835 46 in. LCD Television Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitek Televison & Video Experts

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Ron F

Level 2 Expert

135 Answers

Are you a Vivitek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...