Question about Projection Televisions

1 Answer

Ant-In is broken off on Sylvania TV Model #6427FF

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

You can buy an RF modulator to connect the coax via other means such as RCA jacks. The part is usually under $30.00 and can be found at most stores selling tvs.

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a Model # 50GX49B 50" inch TV, That our


You need to set the antenna input back to ANT A (1), you are ANT B (2) right now that why you are not seeing any signals.
Use the INPUT button on the remote to scroll through until you see ANT A which is the one your kid use for the cable connection,
You should download this user manual:
http://www.retrevo.com/support/Hitachi-50GX49B-TVs-manual/id/371bh845/t/2/

Let me know if it works.

Dec 31, 2010 | Hitachi 50GX49B 50" Rear Projection...

2 Answers

I purchased a new Sylvania LCD TV model # LC320SLX and I can't seem to find the correct code to program my universal remote to the TV. According to Sylvania, they remanufactured their TV's at the...


I called Comcast and they had no clue. But I called Sylvania and their reps were FABULOUS!!! Turns out, the TV makers send the cable companies the frequencies for each TV then the cable companies send them to a 3rd party to get the codes written.

This model of TV is new and there is no code written. The rep suggested that we countinue to check back on the Comcast website regularly to see if the code is posted. She said that the sales reps tend to get the info last.

The Sylvania rep anticipates a new code written soon because this is such a prevelant problem.

Oct 18, 2009 | Projection Televisions

1 Answer

Broken Antenna Port


If you have already identified where the connection was on the board you will have to access the board to be able to solder back to the points where the old connector was. Once you have identified the two solder points (One should go to ground and the other if you can with the tv on touch it and see if a picture tries to come in or get rid of the snow). Then buy a matching transformer from radio shack or Home Depot, Lowes. Normally this would go on the outside antenna. But you want to take it and clip and strip the ends that have the forks. Solder this to the board, one to ground and the other to the point that would have been center on the old broken piece. This will have a 72 ohm or a connection that your antenna will connect to.

Jan 11, 2009 | Toshiba TP50G60 50" Rear Projection...

1 Answer

60" can not switch from ant a to ant b


Where can I find a bulb for this tv for a good price

Aug 12, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Sylvania Tv/VCR combo Model 6319ccc


Hi . The TV that I need help fixing is not a projection TV. It's a 19" or 21" CRT television that has built in VCR. I do not have service schematics so for someone to suggest troubleshooting using schematics doesn't help me. I understood that for $10.00 someone who had repaired the same model would tell me what component they changed out to fix problem. TV is still not fixed. Its a Canadian model so its possible that this SYLVANIA model might not have been sold in other regions of the world. TV also makes slight crackling sound from speaker when you pull the plug from wall outlet.

Jun 13, 2008 | Projection Televisions

1 Answer

Help with tv


does your tv make noise the bearing usually go out on those color wheel sets so do the lamps on that model if you are confident go for a repair at home here is a shortcut http://www.jangro.com/a/2006/07/24/samsung-dlp-replace-color-wheel/ if this is the year click the link above

Feb 16, 2008 | Projection Televisions

1 Answer

"ant A" and "ant B" inputs go black when the tv is first turned on.


Try opening that "Ant A, B" device and apply some fresh solder to all the components inside. Also you can try to by-pass that device using the connector below. One end connects the cable in and the other end connects to the circuitry inside the TV.

b7e27de.jpg

Jan 24, 2008 | Mitsubishi VS-60609 60" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...