Question about Cameras

Open Question

Serial number for sandisk rescuepro v3.3

When loading the disk, and trying to use the program afterwards, it asks me to enter the serial number. where is this serial number found? there is nothing on the box that fits to the 5 boxes it asks to fill. the numbers on the box are: SDFX3-004G-A31 619659022396 (bar code) 80-56-05969-004G
garry hassel hassel@sasktel.net

Posted by on

  • bbadbgood Sep 14, 2008

    I have the mini disk and installed it on PC.I thought the process was over when I clicked FINISH. Maybe not if there is a serial number can someone give it to me too.?
    bbadbgood@gmail.com
    Even worse. I tried to install the mini disk on my MACBOOKPRO but it just spit it out.Is there a trick to getting the MAC to install the mini disc?
    Regards
    Alex


  • Anonymous Apr 17, 2009

    Same porblem as the other two posted.

×

5 Suggested Answers

robmcd27
  • 423 Answers

SOURCE: Downloading software for 735 hp photosmart camera

Hi there.

I went to the HP site to attempt to get the software for your camera and I had no problem and didn't need the info you are asking for.
Go here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=90112&lc=en&cc=us&dlc=en&submit.y=5&submit.x=9&lang=en&cc=us

It's the HP site for the software for your camera. You don't need any information. Just pick your operating system that your running on your computer. On the next page choose HP Photosmart Full Featured Software and Drivers. On the next page, click the blue button and choose save. Make sure your pick a place to save it so you can remember (like the desktop). Then go to the desktop and install the software. By the way, the version your after is 9.0, not 2.0.
That should solve your problem. Let me know if your having any problems, and thanks for visiting FixYa. Don't forget to rate my solution a fixya!

Rob

Posted on Feb 25, 2009

  • 919 Answers

SOURCE: wHERE IS THE SERIAL NUMBER LOCATED ON FE-110 OLMPUS CAMERA

If the new computer is running Vista operating system the Olympus Master version 1.x software is not compatible.

To learn about the new and free version of Olympus Master 2 software go to:
For Windows:
http://downloads.olympus-europa.com/OM2/win/OM211Setup.exe
For MAC:
Olympus Master 2.11: http://downloads.olympus-europa.com/OM2/Mac/OM211EN.dmg
This software replaces all previous versions of Camedia Master 4.x and Olympus Master 1.x.

Since this is a free download there is no serial number needed.

Posted on Mar 30, 2009

  • 919 Answers

SOURCE: Locating the serial number for registration of my SP-510uz.

To learn about the new and free version of Olympus Master 2 software go to:
For Windows:
http://downloads.olympus-europa.com/OM2/win/OM211Setup.exe
For MAC:
Olympus Master 2.11: http://downloads.olympus-europa.com/OM2/Mac/OM211EN.dmg
This software replaces all previous versions of Camedia Master 4.x and Olympus Master 1.x.

Posted on Apr 13, 2009

  • 4090 Answers

SOURCE: Have lost Olympus Master serial number.

The serial number is on the base of the camera. We can't give you a new serial number! They are unique to the camera.

Posted on Oct 10, 2009

  • 11967 Answers

SOURCE: I I am trying to up load pictures PC

Blame Microsoft updates. Try using a card reader to download your pics to a folder you create on your desktop.

Posted on Dec 07, 2009

Testimonial: "Thankyou have done what you have said it has solved the problem"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to set up my MFC 4820c software, it asks me for serial number. i enter the serial number on the back of machine but again my PC says that the serial number is wrong. from where can i get the right...


It wants the software installation serial number or key, not your printers serial number.
Look on the installation disk or packaging that came with it.
If you don't have it, contact Brother tech support by email or phone.

Aug 10, 2012 | Brother MFC 4820c All-In-One InkJet...

2 Answers

How can i perform a factory restore on my emachine w3619 without my start up disk..my computer will not load my sims 3 game and it used to be able to i tried everything (including system restore) to fix it


ask emachines for duplicate dvds of your startup disks.
your os is Genuine Windows Vista® Home Basic
any copy of that would work, but you wouldn't have the cyberlink or other software

before doing that
you may first try checking for viruses or startup programs
and then reinstalling any game software

maybe your sims is broken. verify that it works on another machine

Jan 13, 2011 | Computers & Internet

1 Answer

I had Opcode MusicShop 1.0 and 15 years ago I did a lot of compositions with that program. Now I would like to import the Midi files to Logic but when I tried to open MusicShop (I still have Classic on my...


I have musicshop 1 and have loaded it onto an osx mac with classic. Unfortuantely, even with the right codes it will not run under classic. It opens, appears to be fine, will read the files but then will not play them. in fact it will do nothing with them. Good luck in finding a solution. Only solution I can come up with is get an old mac, load it all, convert files to midi, and transfer them to a modern program.

Nov 15, 2010 | Opcode Musicshop (MSCSHP) for PC, Mac

1 Answer

I want to learn the volume serial number of any harddisk by means of a program (software) (except chkdsk in dos window of winxp). Harddisk brand name is not important. The OS is Windows XP/Vista/Win7.


in dos you can type vol and hit enter and it will give you volume serial number. You can also use this software to view and change the volume serial number HERE. It's the third download called "disk serial number changer"

Apr 13, 2010 | Computers & Internet

1 Answer

The seriel number provided on disk sleeve will not work.


The installation program for the WINDVR 3 program isn't looking for the serial number of the TV Tuner card. It's needing your registration serial number when you paid for the software. I found a serial number that worked for me (after looking for 4 hours!!). Just enter this serial number and it should work for you. Be sure and put something down for your company name, also. Here is the serial:
kC7G94GSAE08A0S

Jan 01, 2010 | Sabrent TV-PCIRC (TVPCIRC) Video Capture

1 Answer

Have an optima pc model number 255K15, serial number 1053870-0705-009. need t0 reinstall operating system,no disk or info.Can you help.Thanks Bryen


if you wanting to load XP or any other O/S try purchasing the disk from a reputable dealer or ask someone if they have the disk and just purchase a legit key from microsoft:)

Oct 25, 2009 | Optima Mini PC PC Desktop

1 Answer

Can't format 2Gb Extreme III SD card in Canon G9 camera


Did you try formating with the Camera? Before that, Try formating with Windows Disk manager, then format with the camera, It will solve the problem.

Nov 01, 2007 | SanDisk Memory Media

2 Answers

Serial Number Issue


The only Serial that I know of that should be asked for is the Windows Product Key, This should be on a microsoft sticker on the underside of your laptop, if it is not there check your documentation as it may be there instead.

Oct 29, 2007 | Compaq Armada 1500C Notebook

1 Answer

Sandisk Card recovery


Hello,

Go the nearest computer store and buy the cheapest external CD-rom drive and connect it to your computer.
Hope this helps!

Nicholas

Sep 16, 2007 | Electronics - Others

Not finding what you are looking for?
Cameras Logo

Related Topics:

1,779 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

98829 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...