Lost combination model 5059 brinks key and combination safe

notify brinks or a locksmith

Try the instructions in here

https://www.justanswer.com/home-improvement/8tlr2-left-brinks-safe-5059-open-key-lock.html

https://www.google.com/search?q=key+is+stuck+in+the+lock+of+my+Brinks+safe+model%235059

Or contact Honeywell direct.

https://www.hunker.com/13419341/how-to-get-a-combination-for-a-brinks-fire-safe

You do not need to go to a locksmith - you can get a new key much more inexpensively by contacting Honeywell (the parent company for Brinks safes) at 1-800-223-8566

When you call Honeywell, you will need to provide your safe's model number (5059) and the serial number (usually found on the right of the safe, near the model number).
At the company's discretion, sometimes they require a notarized affidavit confirming ownership. There is a fee for a replacement key (it was $15 last time I checked, but may be higher now), but it is much less expensive than going through a locksmith (who will generally just do the same thing as described above!)

Try a locksmith first, then get on Brinks support page.

this is fixya we dont sell products--notify brinks for your request

Each Brinks 5059 safe has a different default combination, so to get the original combination you must either contact Honeywell (the parent company for Brinks safes) at 1-800-223-8566.

You need to send them a notarized letter showing safe ownership in order to get the master combination. When you call Honeywell, you will need to provide your safe's model number, the serial number (found on the right of the safe, near the model number), and your key number.

Brinks safes are very reliable and secure, Unfortunately there is no way of recovering the the combination of the same without speaking with manufacture. Now you could do it the old fashion way that is to listen to clicks from the combination lock while moving the nob, However this takes alot of practice. The only the I would suggest to do is to speak with the Manufacture. I do appoligize once again and I hope you have better luck. Have a good day

Here is the turning sequence:
General Turning Sequence Instruction NOTE SAFE MODEL 5054/5055/5059/5080/5081/5084/5111/5190/5195/5575/5700/5702.

Combinations consist of FOUR (4) positions (numbers).
BEFORE YOU START
Before you begin, please clear all settings by turning the dial CLOCKWISE (to the right)
three times. We also recommend to try the procedure with your safe door open first. Then
follow these steps:
TURNING SEQUENCE
1. Start the dial on 0 (zero).
2. Turn the dial to the RIGHT, passing your first combination number FOUR (4)
times and stopping at that number on the fifth time around.
3. Turn the dial to the LEFT, passing your second combination number TWO (2)
times and stopping at that number the third time around.
4. Turn the dial to the RIGHT, passing your third combination number ONE (1) time
and stopping at that number the second time around.
5. Turn the dial to the LEFT, to the last combination number and STOP.
6. Insert the key in the cylinder lock and turn RIGHT to open.
Your safe should now be opened.

To bad you dismantled. Here is the turning sequence:
General Turning Sequence Instruction NOTE SAFE MODEL 5054/5055/5059/5080/5081/5084/5111/5190/5195/5575/5700/5702.

Combinations consist of FOUR (4) positions (numbers).
BEFORE YOU START
Before you begin, please clear all settings by turning the dial CLOCKWISE (to the right)
three times. We also recommend to try the procedure with your safe door open first. Then
follow these steps:
TURNING SEQUENCE
1. Start the dial on 0 (zero).
2. Turn the dial to the RIGHT, passing your first combination number FOUR (4)
times and stopping at that number on the fifth time around.
3. Turn the dial to the LEFT, passing your second combination number TWO (2)
times and stopping at that number the third time around.
4. Turn the dial to the RIGHT, passing your third combination number ONE (1) time
and stopping at that number the second time around.
5. Turn the dial to the LEFT, to the last combination number and STOP.
6. Insert the key in the cylinder lock and turn RIGHT to open.
Your safe should now be opened.