Question about Audio Players & Recorders

1 Answer

I have a Genesis G506 and am having problems setting it up properly,the remote seems to freeze up(i have to power it down then start again) I cant understand the setup procedure on setting up the center and side speakers all i get is the Sub woofer and the fronts to work thru the am/fm reciever. When i try hooking it up to my LCD HD TV I get very faint low sound?? Not sure wghat the "red" lights are telling me when the flash on and off...How do you "test" the speakers?

Posted by on

  • 1 more comment 
  • max007 Sep 20, 2008

    No i actually bought them fron Cash was all NEW in the box..the speakers are fine its that the so called"receiver tuner" has no controls everything is controlled thru the remote.

    I had the sub woofer and the two speakers working souded okay.and i only paid $135 so i was lucky in a way..actually got a number to call and they wanted to send me a new remote for $35 hahaha never heard back from the woman.anyway they are not bad looking and they do work with my other unit


  • Anonymous Nov 20, 2008

    The system is ****, a scam going throught out the US. You can get the it to work by changing the remote. Pop, Rock, Church....

    One of those gets the center speaker to work.

  • godofthunder Feb 22, 2009

    ha ha i sell theese things and if yall dont like them then fu#@ you if you cant take a joke ha ha my name is nick in philly ill catch yall at circiut city with a crazy question ha ha suckers lol


1 Answer

Ya were did u buy the speakers.... im going to guess probably outside a bank or circuit city right??  ya its a scam there not worth sh!$   throw them away  how much did u pay btw

Posted on Sep 20, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Harman/Kardon receiver avr 630 powers up an seems to be working properly . But I can't seem to get any sound to come out the speakers. But if I plug in the head phones I can hear sound in them. The...

If you didn't change any of the settings on the device you may have blown out the power amp transistors ( and usually the driver transistors as well). I'm not saying that this is the 100 percent right answer, but since you have sound with the earphones it is very likely. the headphone amp and main amp are two seperate things. there is ofter fuzes in the higher end units like you have. Look on the back of the amp. If there are no fuzes there, they may be internal. If they are on the back you can replace them, but if they immediately blow again that would indicate blown power amp, and a trip to electronics repair is in your future. good luck. Harmon Kardom makes great equipment.

Mar 17, 2015 | JVC Audio Players & Recorders

1 Answer

Power cuts out and starts again

Electrorama Electronics Trinidad will fix that problem on your Panasonic Strada deck system ,It will remain on all the time it will stop going off and on and freeze up...Ph.662-6387 David or Daniel.They also convert radio station to receive local FM stations..

Feb 24, 2014 | Panasonic HDD Navigation CN-HDS700D

1 Answer

Samsung HW-C560s receiver is not responding to the remote, but remote is working fine

I had the same issue and wasn't able to find a solution on the net.... I got it working again by setting the remote to the receiver setting (amp in orange) then held down the power button and the number 1 button at the same time for a few seconds. It now works perfectly again.

Feb 10, 2011 | Audio Players & Recorders

1 Answer

On my kenwood receiver vr 707... I'm having difficulties in getting any base for subwoofer. I pluged in the "subwoofer pre-out" like it says in the manual but it seems as if there's no power...

p { margin-bottom: 0.21cm; }

You have to set the subwoofer setting in you system .for that do the following.

1 .For the remote control, press and hold the TUNER key for more than 3 seconds to switch to receiver mode.

  1. Press the SETUP key to enter the SETUP mode and select SETUP SYSTEM using up arrow or down arrow

  2. Select SP SETUP and press the SETUP key again so that the speaker system indication "SP SYSTEM" scrolls across the display.

  3. Press up arrow or down arrow to select OTHERS and press SETUP key

  4. press the up arrow or down arrow to select the SUBW ON and press SETUP key

    exit the setup and try. Is the subwoofer is working or not


Jan 26, 2011 | Kenwood VR-707 Receiver

1 Answer

A/V receiver freezes up and has to be unplugged for it to work "almost normal"..

I had the exact same problem with mine. Local repair shop had to replace the main in-put chip on the back of the front panel. Works great now. Cost about $125 out the door.

May 31, 2009 | Pioneer VSX-94TXH

1 Answer

Component out doesn't work on Denon AVR-3805

You can try resetting the unit, it is a procedure that can make things start working again. Be aware that it will put all settings back to factory defaults, and you will need to go thru and set everything back up again. If it does not work, then you most likely have a component failure that will require serious electronic troubleshooting and this would be best done by a professional.

Here is the reset procedure.

1. Turn power off with the main power switch on the front display, this should make the red led go out. There are 2 power switches on these Denon's. One is a bigger switch and is used most often, the other is a small mechanical switch that is normally left turned on at all times.

2. Hold down the "Direct" and "Pure Direct" buttons together (both at the same time) and while holding them down you turn the power back on again with that little power switch you just turned off.

You should see all the lights in the display light up and then it will turn on to the default setting which, if my memory is right, will be the tuner at it's lowest setting.

Then go thru and reset everything back the way you like it and need it. Make sure that all the video inputs are properly set for each function so you are not trying to get a composite signal out of a function that may be set for S-video or something like that.

Hope this is some help for you.


Nov 08, 2008 | Denon AVR-3805 Receiver

1 Answer

I have the Onkyo 706 with remote RC-717M. My remote just suddenly started to malfunction. The volume up is turning it down and vice versa. The power button to shut the receiver off is doing the function...

Have you tried resetting the remote? According to the manual (page 101), press and hold the RECEIVER button, press the AUDIO button, wait approx 3 sec. until RECEIVER highlights and finally press RECEIVER again. Of course if you've programmed a remote control code for your PVR in the RC-717M, you'll have to do it again.

Oct 18, 2008 | Onkyo Audio Players & Recorders

1 Answer

3802 shuts off

1-speaker terminal are short circuit-turn power off and connect speaker terminal properly.
2-ventilation holes are closed--turn it off and make good ventilation around and leave it to cool down and then turn it on.
3-the unit is operating in high power condition turn it off and leave it to cool down and then turn it on.

Aug 07, 2008 | Denon AVR-3802 Receiver

1 Answer

Denon AVR-1906 Reciever is not working. Was watching a movie and then it suddenly shut off. Now, the power light is blinking red. When I try to power it on again it starts to boot up but then turns off...

speaker terminal are short circuit,switch power off connect speaker properly then switch power back.
-the ventilation holes of the set are blocked-turn power off and make good ventilation around leave the set to cool and turn power back.
-the unit is operating at continuous high power turn it of and allow for cool down and switch it back.

Jun 01, 2008 | Denon Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

1,655 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

98829 Answers


Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69805 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides