Question about Brother HL 5250DN Laser Printer

1 Answer

THE PRINTER WILL NOT TURN ON AT ALL.

I HAVE TRIED TO PUSH ANY SWITCH I CAN FIND AND THE PRINTER WILL NOT TURN ON. ANY SUGGESTIONS

Posted by on

  • sparticles Sep 11, 2008

    I have the same problem

    Power cord is fine and is plugged into a working socket - no matter what buttons I press, printer remains OFF.

    Tried holding down power button, nothing


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 535 Answers

Chek the power cord or power adepter

Posted on Sep 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a separate fax line for my Canon MX310. It goes into fax mode but noting happens. I also cannot receive faxes.


The only reason to call the phone company is if you're not getting a dial tone on that line. Otherwise, have you shut down the printer and tried to reset it to factory defaults. To do that, follow the instructions below:
  • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
  • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
  • 3 Release "Stop/Reset" while holding down the "Power" button.
  • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
  • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
  • 6 Push the "Power" button, then lift the MX310 cover open.
  • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
  • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.
  • Good Luck Mark

Feb 20, 2015 | Canon PIXMA MX310 All-In-One Printer

3 Answers

False empty toner reading


The problem can be may this however hard resetting it can fix the issue

1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.
8. Restart printer.

Jul 12, 2008 | OKI C5500n Printer

1 Answer

Kenmore Elite Heavy Duty King size capacity Quiet Pak 1 dryer doesn't turn on


Check to see if the door switch is working. When you push and release it, it should click. If not, it will need to be replaced.
If the switch is good, then the only other component that would cause that problem is the thermal fuse. If you could post your model number I could direct you to the part you need.

Oct 15, 2012 | Kenmore Dryers

1 Answer

When I try to send a fax I get a redo message and no pages are sent...i have sent many faxes to this number....a message appeared after one page was scanned that said to prress clear and srop...i could not...


Please reset the Printer by following these steps:

Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.

Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.

Release "Stop/Reset" while holding down the "Power" button.

Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.

Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.

Push the "Power" button, then lift the MX310 cover open.

Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.

Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Feb 27, 2011 | Canon MX310 Office All-In-One Printer

1 Answer

I cannot turn off my printer. all lights are


Unplug it, wait about 1 minute and plug it back in.

May 28, 2010 | Epson Stylus Photo 870 InkJet Printer

1 Answer

Have 1983 Yamaha 650special and i can't turn the ignition at all. like someone tried jam something in there. took apart seems fine, push down and turn and all wiggle even. Nothing any suggestions other...


When you remount the switch after inspecting make sure you're not jamming the back of switch against something.When you turn key you're actually pushing down,that gets connection "bar" room to slide from one connection to another.With no clearance the "bar" can't move.

Mar 24, 2010 | 1983 Yamaha XJ 650

1 Answer

Dryer won't start. Tried a new start button, then tried a new thermal fuse. Any suggestions?


Check the starter switch on the motor, Push button switch energizes the starter windings on the motor, but through the switch on the motor that's designed to prevent the starter windings from being energized when the motor is up to speed.

Sep 10, 2009 | Whirlpool Dryers

1 Answer

I was half way through printing when my printer stopped and a message popped up saying my ink wasnt compatible. I am using genuine epson ink. I've replaced it and it's still not working. I have tried...


Try this. Turn on printer. It will red light on. Push ink button (1-4 times) depend on number of chip that ot recognized. Push 1 time. carriage will move to gap. wait for 10 seconds. Push again 1 time.

Jun 25, 2009 | Epson Office Equipment & Supplies

2 Answers

Turn signals not working


check the relay push it in or change it

Mar 14, 2009 | 1992 Ford Mustang

2 Answers

HP Officejet 7410 All-in-one No Power Light


Turn the printer upside down right underneath where the cartridge station is you will find a small white gear...sometime it may be covered with a blue rubber cover.
when you turn the gear ..the barrier in front of the cartridge will go down.
Then do a rest on the printer and then install it.

Jun 08, 2008 | HP OfficeJet 7310 All-In-One InkJet...

Not finding what you are looking for?
Brother HL 5250DN Laser Printer Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...