At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The B button on the Classic Controller will not work with my downloaded Ocarina of Time and Majora's Mask. I bought another one, but still am unable to use my sword and duck.
Re: The B button on the Classic Controller will not work...
If the button works in other games then by process of elimination it sounds like the game is the problem. I would contact nintendo about the issue and possibly get a refund for the game. Thank you, Lee
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you made sure its plugged in properly and secure? Or made sure the wire isn't damaged? If its fine I would suggest trying a different controller or try a Nintendo GameCube one, they work.
3-1-1Slave DMA register failureThe DMA controller has failed. Replace the controller if possible3-1-2Master DMA register failureThe DMA controller had failed. Replace the controller if possible3-1-3Master interrupt mask register failureThe interrupt controller IC has failed3-1-4Slave interrupt mask register failureThe interrupt controller IC has failed3-2-2Interrupt vector errorThe BIOS was unable to load the interrupt vectors into memory. Replace the motherboard3-2-3Reserved 3-2-4Keyboard controller failureThe keyboard controller has failed. Replace the IC if possible3-3-1CMOS RAM power badReplace the CMOS battery or CMOS RAM if possible3-3-2CMOS configuration errorThe CMOS configuration has failed. Restore the configuration or replace the battery if possible3-3-3Reserved 3-3-4Video memory failureThere is a problem with the video memory. Replace the video adapter if possible3-4-1Video initialization failureThere is a problem with the video adapter. Reseat the adapter or replace the adapter if possible
^^ those are the beep codes, they are found here: http://www.bioscentral.com/beepcodes/phoenixbeep.htm# i assume they are using phoenix bios. you may want to boot it again and pay close attention to the time inbetween beeps so you can accurately diagnose the problem. there is a way to force a bios flash, you'll have to download the bios on a second computer. go here: http://goebelmeier.de/bootstick/ download the program and follow the instructions. boot to your flash drive by tapping f12 at boot, select usb drive and dos will load. once it loads follow the instructions in the previous web address. good luck!
put in one of the good games and go to keycodes and selct zelda. Turn off the n64 and put the game you want to use in the gameshark then turn it on and it should work
If your husband plugged it in without turning it off, the jumper pak, or the control deck itself is more than likely fried. Check and see if the control deck will work with the memory pak, instead of the jumper pak inside it. If not, the control deck is fried, and you'll need to buy another N64.
The Jumper pack is needed for Majora's mask, as the extra space is needed for the game to play the enhanced graphics. Ocarina of time was made before the jumper pak was introduced, so it does not need it. As for installing it, get a jumper pak installer kit to remove the original memory pak, the insert the new one.
×