Question about Krups Small Appliances Espresso Machine

Open Question

I need to get a new rubber O ring seal for my Krups Auto Cappuccino System Type 965. Were can I find one please.

Posted by on

2 Suggested Answers

prittykitty
  • 1 Answer

SOURCE: krups cappuccino manual

Don't know if your still looking, but if you go in the customer service section of the Krups website (krups.com) and ask them for the manual they will email it to you. Or, email me and I can send it to you!

Posted on Nov 11, 2008

  • 1 Answer

SOURCE: we lost instuctions on our krups coffee/cappuccino maker dont know how to use

XP4050 Krupps
pumps water through machine into drip tray not through coffee anymore

Posted on Aug 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Water liquid on base


It could also be that the rubber rings need replacing.You can do it yourself if you have the guts to try it. There's a nice walkthrough on http://www.pioevogel.com/krups

Jul 07, 2011 | Krups Orchestro 889 Espresso Machine

1 Answer

My Krups F880 4238 (Vivo) which is just over one year old leaks aound the dispensing cap when activated to deliver coffee. Is there a seal which might need replacing? Thankyou . Michael Hill


Hello,
I have the same coffee machine, same problem. there is a black ring rubber seal. Mine is broken and I'm trying to buy a new one. There are a few places to get them from but they either charge quite a lot for P&P or small delivery charge, or only accept a strange kind of credit card that I don't have. If you have any luck getting one, let me know. : - )

Jan 19, 2011 | Krups Gusto 880-42 Espresso Machine

2 Answers

We lost instuctions on our krups coffee/cappuccino maker dont know how to use


XP4050 Krupps
pumps water through machine into drip tray not through coffee anymore

Apr 26, 2009 | Krups Cappuccino/Espresso Maker -...

1 Answer

My Krups Superiore pull lever is broken again. It's always the same problem but I cannot seem to be able to remove the casing to replace the level. Can someone shed some light please?


Here's I how was able to do it. I caution that this procedure may result in the molded snap locks breaking since they do not appear to have been designed to be removed.

1. Using a wide flathead screwdriver, I pulled the rubber grip ring from around the top of the rotating unit. This allows a better view of the edge of the removable silver top.
2. I popped the silver top off of the rotating unit and set it aside. It is held in place by four molded snap locks which are noting more than plastic u-shaped extensions which attach to corresponding hooks on the rotating unit.
3. Once the silver cap is removed, I used a 3/4" spade bit to bore a comfortable hole in the top of the unit. Be careful not to remove too much material or it will weaken the attachment points of the removable silver cap.
4. I passed a screwdriver through the new opening and pushed the plastic lever mechanism towards the broken release key. When looking at the inside of the rotating unit, you will notice a plastic knuckle resting close to the inside face of the release key. Just beneath this knuckle there is a horizontal slide with some circular holes in it.
5. By forcing this slide beneath the knuckle and towards the release key, you can raise the release lever and remove the rotating head.

I hope this helps.

Mar 06, 2009 | Krups 894-42 Superiore Cappuccino Espresso...

1 Answer

I cant make cappuccino with the instructions in Krups machin F888


Go to krupsusa.com and click on "instructions" you can download the instruction manual.

Feb 26, 2009 | Krups F888-43 CaffeCentro Coffee and...

2 Answers

Krups XP2070


if the water is leaking from the back left side of the unit then the seal/valve to the expresso water container is lose and leaking. you can either go the warranty route or open the back up and tighten the two screws holding the seat/valve in place.

Jan 03, 2009 | Krups XP2070 10 cup Coffee Maker/15 bar...

3 Answers

Breville ESP8XL Espresso Machine Cafe Roma leaking.. help please..


We had that happen and it was a crack in the black ring that holds the filter. Breville could not supply us with one but we found an OEM part in aluminum from http://www.vancouverwireedm.com/caferomadiyt.htm. We received it 1 week after ordering. It was pretty easy to replace. Our machine works fine now.

Mar 06, 2008 | Breville ESP8XL Espresso Machine

4 Answers

Krups cappuccino manual


Don't know if your still looking, but if you go in the customer service section of the Krups website (krups.com) and ask them for the manual they will email it to you. Or, email me and I can send it to you!

Oct 29, 2007 | Krups Bravo Plus 872 Espresso Machine

1 Answer

The water going into the tray


Hi There The answer is very simple it is the main seal from the from the press unit which can be changed if you are not handicapped with mechanical things. The O-ring is a red color on with a shore of 50+-5% and for a heat application of around 100 degree Celsius. The dimensions are 38mm ID by 3.55mm diameter. I hope this info was helpful if not u can call 00971506544928 or just e-mail to dietmar2000_2000@yahoo.de and I will guide u through.

Aug 29, 2007 | Krups Orchestro Dialog FNF2 Espresso...

Not finding what you are looking for?
Krups Small Appliances Espresso Machine Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Sergio M Perez

Level 2 Expert

39 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...