Indesit WD125 washer dryer when not in usee water leaks into drum

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101;';

';

Could try pressure switch/ clean the pipe feeding it check for hole in it causing air leak and pressure drop, make fill valve overfill

If the heater element is not working, then the cycle will not progress.
You need to test the element to see if it is o/k.
Hope this helps.

check your pump it may not be working

sounds like a faulty water valve if not pcb or pressure switch sorry cannot be more precise but thats indesit for you regards jason

Hi,

I've been looking for these instructions and have just stumbled across them . Just inside the door there should be a barcode. On the top right check the model no. mine is WD 12S, despite the model no on the outside being WD125.

If so, look here http://imagebank.indesitcompany.co.uk/brochures_online/pdf/indesit/Laundry/WD12S.pdf

ATB

The Mighty Lev

same problem here. clothes are steamy and hot when opening the door. not sure where the condenser is, can anyone help?

sounds as tho may not be draining. have you checked the filter? also check for foreign objects in the pump impellor