Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

Led display disappeared

Anybody know how to fix the display? what part i need to buy? machine still working fine, just need to squint a lot to be able to read the display.

thanks in advance for any suggestions

andy

Posted by on

  • andy
    andy Sep 06, 2008

    thanks for the suggestion..........unfortunately not the answer.

  • Jeff Rockwell
    Jeff Rockwell May 11, 2010

    Unplugging the washer has NOTHING to do with this problem. Unfornately, when the display begins to dim, in most cases, the operator control board requires replacement.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 166 Answers

Peace,

Did you try this first?
try unplugging the appliance for 10 minutes and then try restarting it.
perhaps it needs to be reset or rebooted!

Please rate me at fixya.com before you sign out!


Here is a quick ship parts place that may be able to tell you!
Discount Parts Major Appliance & Consumer Electronic Parts. TOLL FREE 1-(888)-338-3790 8:00AM - 12:00 MIDNIGHT 7- DAYS A WEEK

Posted on Sep 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there no power?


Hotpoint red led flashes Washing Machines Questions ...

www.fixya.com > Forum > Tags > red led flashes > Washing Machines
Hotpoint washing machines red led flashes related questions and answers. ... then off When i turn on the washing machine - Hotpoint wf640p - the LED display flashes all the 8s (so ... Question about Aquarius WD640 Front Load Washer/Dryer.

Oct 27, 2015 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Samsung LED backlighting turns off


The only cure for this is to get it repaired and stop smacking on it before you do some real damage.

Jan 24, 2013 | Samsung NP300E4C-A02US Laptop

1 Answer

E228WFP display disappears Posted by


disconnect all the cable from the monitor except the power cable .
see if you see any test screen and keep it on ,if the test screen blacks out you monitor is bad ,better buy a new one as usually repairs cud be expensive

Apr 17, 2010 | Dell E228WFP LCD Monitor

2 Answers

I HAVE A PROBLEM WITH 19in NO DISPLAY IMAGE


Yes, i fixed mine! I forgot to say that the power-on button was broken. So after suffering so long a pressed the buttin in untill it kind of disappeared. It might have been blocking something, i dont know.
So with no power on button it works fine, dont know if this is a good solution, but it worked for me !

Feb 24, 2009 | BenQ FP71G 17" LCD Monitor

1 Answer

Start up on pfaff 7560


A lot of people don't know this, but there is a dimmer dial on the front of your machine, located just under the display. Often it gets bumped and the display disappears. If not then you need a fuse in the base plate or worst case a new circuit board.
Good luck!

Jan 29, 2009 | PfaFF Creative 7570

1 Answer

The display of my SanDisk Sansa C250 is messed up


I think there is a language option in the Settings setup. Scroll down from Menu (music,radio,voive,photos,settings). Scroll down to Language. Select English or whatever. Worked for me!

Jan 22, 2009 | SanDisk Sansa c250 (2 GB) MP3 Player...

2 Answers

Radio is not getting power


you need a new radio unit. common with this car.

May 17, 2008 | 1996 Nissan Maxima

2 Answers

LED display on Janome Sewing Machine reads SP


SP means Spool Pin. It is currently in position to wind a bobbin. Move the bobbin winder pin to the left and SP should disappear.

May 12, 2008 | Janome 8080 Computerized Sewing Machine

2 Answers

Saeco Magic comfort


turn the hot water / steam knob on to 'ventilate' the pressure from the machine. The ventilate /overtemperature message will disappear when ready (few seconds usually)

Oct 26, 2007 | Saeco Magic De Luxe Espresso Machine

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...