Question about Televison & Video

Open Question

Pioneer PDP506PG Plasma TV keeps turning off. Comes back on for 1 second then turns off again.

Posted by on

  • Anonymous Apr 23, 2009

    al momento de encenderlo se apaga y la luz azul q esta en el sintonizador parpadea 8 veces

×

5 Suggested Answers

  • 1153 Answers

SOURCE: Pioneer SD-62A5 has red standby light, won't turn on

Check C258 video assy.

Posted on Aug 16, 2007


  • 1 Answer

SOURCE: th-42pz700u

Same problem. Have to wait until they open back up tomorrow to make the call.

Posted on Dec 11, 2007

  • 1 Answer

SOURCE: Philips 42PF9945 on/off switch problems

Hi huttleywoof,

I've had the same problem 1 week ago. Bought new wirewound ceramic resistors (5w 6.8 ohms) and replaced the old ones.... It helped to majority of people who had the same problem, but mine has now some other issues with appearing diffrent colors on the screen which are not supposed to be there :) Like all goes blask with few red pixels or green :-) Having fun now and can;t find service manuals for this TV :(

Posted on Mar 01, 2008

  • 84 Answers

SOURCE: Pioneer Elite Plasma TV

This a factory issue and usually requires service. Most cases it is a bad power supply caused by a surge or powering off and on too fast ... sorry I wish I had better news

Posted on Sep 20, 2008

  • 94 Answers

SOURCE: pioneer DEH-P3100UB car stereo keeps turning off and on again

broken wire, or dirty connection....oh check your ground wire for radio...

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 55" pioneer rear projection tv, was working great, turned it off and when turning back on it comes on for a split second and it shuts off


Take the back of of your set. You should see if there are leds on the circuit boards that light up when you try to turn on set. Use these for reference.
If only D146 on the power supply lights up then the problem is the power boar.
If D1503 lights up then the problem is the audio circuit on the amp board.
If D2614 then the shut down is due to lack of vertical deflection. It could be caused by a defective amp assy or convergence control assy. Checj for convergence drive signal at CN2302 pin 1. If missing, IC2308 on convergence control assy is probably defective. You can confirm by checking blanking signal input on pin 1 of IC2308.
Good luck to you.

Mar 20, 2013 | Pioneer SD-P55A5K 55" Rear Projection...

2 Answers

Pioneer PDP - RO6U Plasma: Says starting up, please wait when turning on. Can't get past this screen. I have tried unplugging and plugging everything back in and am still getting the same error. Are...


unplug it from the power for one hour. Than Press and hold the power button on the on the TV for 20 seconds(It wont show anything. Than Release the power button....

After that plug the power and check the same...

Sep 14, 2008 | Pioneer Televison & Video

1 Answer

My Pioneer Plasma Display Model PDP-424mV must be set on a timer as it will turn off approximately 90 seconds after being turned on . I cannot find the "timer" menu selection. How do I fix this?


try looking on your remote, look for a sleep button and proceed to deactivate the sleep timer using the arrow buttons. if this is not the case, then perhaps your internal cpu is allowing the TV to start, then detecting a problem and forcing the tv to turn off again, though i don't see how it would be possible in this case. there are many others better suited to answer that question other than me, but the sleep button is a good start =)

Dec 03, 2009 | Pioneer Televison & Video

1 Answer

Pioneer elite 504 pu 50 inch plasma black bar horizontal 2" thick in middle of screen


Pioneer plasma tv cut off while in use. Can't turn tv back on.

Aug 31, 2008 | Televison & Video

1 Answer

Plasma tv screen goes black once you turn it on. Only sound


I have a panasonic TH-42PX60U plasma TV. When I watch TV programing I have no problems, or with the DVD input. But if I switch to another input, be it video game (PS2) or vcr the screen sometimes goes black and the red power lcd light next to the power switch flashes. Holding the power button in for a few seconds will shut down the tv. Then I can turn it back on and it may operate normally again for a undetermined period of time, before the screen goes black again. This never happened when new. The tv is about 1 year old. Any ideas on this problem? Thanks Ernie

Aug 13, 2008 | Televison & Video

1 Answer

Problem with pioneer elite pro-99


We are having the same problem of the Pioneer Elite Pro-99 turning itself off all of a sudden. The red 'non' power button comes on as if we had turned it off remotely.
We would love to resolve this. If you can help let us know.

Jun 30, 2008 | Pioneer PRO-99 TV

1 Answer

Pioneer elite 50" 1080 plasma pro-110FD We were watching the TV and suddenly it turn off with a loud boom sound, were trying to turn it on again but it only show a haft screen for a second then it...


You should be able to get in-home warranty service or an exchange at no cost. Don't void the warranty by trying to fix it yourself. Contact your dealer or manufacturer for service or a replacement.

Hope this helps :)

Apr 01, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69708 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

yadayada
yadayada

Level 3 Expert

63456 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...