Question about Hampton Bay 52 In. Cameron II Plus Ceiling Fan, Brushed Steel & Cobalt Blue Finish

3 Answers

I have a kitchen ceiling fan(measured 52") with acessory light. No model availaable. I am replacing 3 speed fan switch located in light fixture. I have a replacement switch with wire terminals L,1,2 and 3, Old switch is broken apart with loose wires of color Black(common)and 3 wires from capaciance module, Yellow,Orange and Purple. I need to know where colored wires go to the replacement switch terminals....Please can you help me??

Posted by on

  • bobsuth Sep 06, 2008

    I am an electronic technician for Matsushita Inc in Franklin Park Ill. and I know there should be a service technician for Hampton Bay Ceiling Fans that can give me the answer to my original request!!!!!!!!!!!!Damit!!!!!!!!!!!!

  • bobsuth Sep 07, 2008

    I thank the person who sent me my solution this time. You are a top rate technician. Please forgive my impatience as I was on the computer for 3hrs on Hamptonbay.com website I'm still learning the internet system and how to get info. Have a good night whatever your name is. your solution is what I was requesting for perfectly.

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

Bob, You will get some nonsensical responses to your post, just refuse them or rate them TFT and IA when appropriate.

We do have experts in this area if you will be patient enough for them to discover you post. And, actually, you could also post in the Free Forum as well.

From my experience which isn't current but years old. Black goes on L, as you probably guessed. Then I would use yellow on 1, orange on 2 and purple on 3.

If your fan doesn't start on highest speed, cycle through tugs until you get high speed and then note how many tugs to get the slowest speed. This then will tell you which wires are fast and slowest. Lable those and reposition them on the switch. As you probably know, the highest speed should be on first pull from the off position.

Regards,
Worldvet

Regards,
Worldvet

Posted on Sep 06, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

You have buy anotherset of swich is bettr

Posted on Sep 06, 2008

  • mohammed marika thambi
    mohammed marika thambi Sep 06, 2008



    1. ceiling fan wires colored
      yellow,purple,black and orange. Replacement switch has markings
      L,1,2,3, and is a chain pull type. help with proper connection





    2. The
      colors of the wires needs to be noted before disassembly. One way to do
      this is to take pictures. Another way is to write it down, any colors
      and where those wires go, in your particular fan, similar to how I
      showed above with my fan here and here.


      Link to return to article.


      The only other way that I’m aware of to figure the puzzle out is to
      backtrace the colored wires to their components, this presumes you have
      an accurate wiring diagram and know how to read it, upon which the
      proper connection point should then become obvious. In the absence of a
      wiring diagram or schematic, then one can be drawn by backtracing all
      the wires to all their components. This is quite time consuming, but
      I’d guess it can be done.


      The repairfaq.org
      link in my prior post claimed that manufacturers are under no
      obligations to keep a standardized color coding for their internal
      wiring, that they pretty much use what wire they have on hand. I don’t
      know if it was an accurate statement, or not. They have additional
      suggestions for what to do when you’re not sure what wire goes where,
      and I’d guess their method would work, I used a variation of it myself
      years ago with the forgotten switch replacement described above.


      In any case, it’s important to always note where wires go BEFORE
      disassembly and record that information, then you can refer to that
      record during reassembly.


      Good luck, and don’t forget the disclaimer!


×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 48 Answers

If you are scared of doing it, go to an authorised repairman.

Posted on Sep 06, 2008

  • Joshua Kuan
    Joshua Kuan Sep 06, 2008

    Where are you staying?

  • Joshua Kuan
    Joshua Kuan Sep 06, 2008

    IF YOU ARE SUCH A GOOD ELECTRONIC REPAIRMAN, WHY CAN'T YOU DO IT YOURSELF DAMM!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The pull chain for our Hampton Bay Sibley 52" Ceiling fan quit working so we think we need a new light kit???


You just need the switch by the sounds of it.

Hampton Bay Customer Support -Troubleshooting & FAQ ' The Home ...

www.homedepot.com/c/SPC_BRD_HamptonBay_Help
  1. Cached
  2. Similar
Find Hampton Bay customer support, replacement parts, warranty information, troubleshooting and ... Ceiling Fans Patio Furniture Lighting Bath Fans Fireplace

Hampton Bay - Ceiling Fan Parts - Ceiling Fans & Accessories - The ...

www.homedepot.com > ... > Ceiling Fans & Accessories > Ceiling Fan Parts
  1. Cached
Shop our selection of Hampton Bay, Ceiling Fan Parts in the Lighting & Ceiling ... Hampton Bay 3-Light Universal Ceiling Fan Light Kit with Shatter Resistant Bowl .... Fan Light is an ideal choice for replacing worn or outdated fan light fixtures.

Hampton Bay Lighting Parts and Accessories ' eBay

www.ebay.com > ... > Hampton Bay Lighting Parts and Accessories
  1. Cached
  2. Similar
Replaces Hampton Bay and many other similar ceiling fan remote controls. Common replacement for model number UC7078T or FAN-HD with a reverse button.

Hampton Bay Replacement Parts

hamptonlightingadvice.com/hampton-bay-replacement-parts/
  1. Cached
If you have a Hampton Bay product such as a lighting fixture or patio furniture or maybe even some solar lights or ceiling fans then you may need to find a ...

Hampton bay fan and lighting company website store

hamptonbayfanandlighting.net/
  1. Cached
Hampton bay fan and lighting online store. Menu. Skip to content. Hampton bay moved to new ... Hampton bay moved to new website >>>> hampton bay ...

Hampton Bay Ceiling Fan Parts

www.ceilingfansbay.com/hampton-bay-ceiling-fan-parts/
  1. Cached
Do you need help to find a Hampton Bay Ceiling Fan Part? ... known and reputable manufacturer of ceiling fans, bath fans, light fixtures, patio furniture, chandeliers and more. ... Easy Way to Finding the correct Hampton Bay replacement part:.

Hampton Bay Ceiling Fans & Lighting

www.ceilingfansbay.com/
  1. Cached
If you need a Hampton Bay replacement part, we can help you with that. Here are the most common Hampton Bay replacement parts that people search for, and ...

Lighting Replacement Parts For Your Ceiling Fan

www.ceilingfanreplacementparts.com/hampton_bay_lighting_replacement_parts.html
  1. Cached
  2. Similar
Hampton Bay lighting replacement parts are readily available to let you maintain for many years the beauty and function of your ceiling fans, lamps, chandeliers, ...
Hampton Bay Google Search

Nov 21, 2016 | Hampton Bay Dryers

1 Answer

How to fix ceiling fan light


Make sure the light wire is connected to the receiver & bottom of fan.You should set the light to the on position when using the remote and leave it that way.

Sep 10, 2015 | Hunter 52" Ceiling Fan With Light And...

1 Answer

3 speed Fan pull switch wiring


Need to know the model # of fan. fanman9952@aol.com

Oct 16, 2014 | Hunter 52" Ceiling Fan With Light And...

1 Answer

How do I get a diagram for a 3 way switch


Do you mean 3 speed switch? The question says your fan has a remote! Pull chain switches are different. If you need a pull chain switch call 1-888-830-1326 with the model # of the fan.

Aug 03, 2014 | Hunter 52" Ceiling Fan With Light And...

1 Answer

WHERE THE REMOTE CONTROL TRANSMITTER IS LOCATED IN THE CEILING FAN


The transmitter is the piece you hold in your hand, the reciever is the part that fits inside the ceiling fan. It usually goes inside where a lamp attaches to the bottom of the fan.

Aug 01, 2014 | Hunter Sontera 52" Ceiling Fan with...

2 Answers

Hunter ceiling fan 22450 no reverse switch manual says there is.


The reverse switch usually is in the lamp housing directly under the motor. With a vaulted ceiling installation, you would need to use a ladder to get access to the switch

Jan 04, 2013 | Hunter 52" Ceiling Fan With Light And...

1 Answer

My ceiling fan has two pull chains The pull chain for the light broke too short. When it broke the light was off. Now I don't have a ceiling light for my kitchen. How can I replace the pull cord?


You will need to replace the pull cord switch. It is inexpensive. You will need to open up the fixture and reemove the old one. Usually it is held on with a nut. If you are not sure of what switch to buy, take out the old one and bring it to a hardware store. Make sure the power is off. Cut the two line to the old switch and splice in the new switch with wire nuts, also use some electrical tape to insulate the connection. Reinstall the nut and close up the fixture. Good luck.

Oct 05, 2011 | Hampton Bay 52 In. White Redington...

1 Answer

I replaced the 3 speed fan switch on my Hunter 21834 ceiling fan/light. The fan only has 1 speed (fast). What did I do wrong? I tagged each wire to match up, but now only one speed.


What was the original reason why you changed the switch? Sounds like you got the hot wire and high speed wire swapped. The hot wire coming from the upper part of the fan should go to 'L' and then the three other wires going down to the little black boxes for the speeds should go to the corresponding 1,2,3 on the switch.

Sep 05, 2011 | Hunter 52" Ceiling Fan With Light

1 Answer

Hello, I replaced a light fixture on my existing Emerson ceiling fan. The light worked right away but the blades didn't turn. I could hear power going to the motor so I went back into the switch cup and...


Signs of a bad capacitor in a ceiling fan include:

  • Fan runs slowly or not at all on all speeds
  • Fan will not start but will spin if started by hand
  • Certain speeds are slow or do not work
  • The motor hums and turns freely by hand but will not spin

    The capacitor is usually a black box inside the switch housing of the fan. If this box appears burnt or melted in any way, that is also the sign of a bad capacitor and it should be replaced.

    have a good day !!
  • Feb 17, 2011 | Emerson Fans CF705AW 52" Northwind Ceiling

    Not finding what you are looking for?
    Hampton Bay 52 In. Cameron II Plus Ceiling Fan, Brushed Steel & Cobalt Blue Finish Logo

    243 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hampton Bay Dryers Experts

    Steve

    Level 3 Expert

    3289 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Donald Klecher
    Donald Klecher

    Level 1 Expert

    2 Answers

    Are you a Hampton Bay Dryer Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...