Question about Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / analog TV tuner / video input ad (1181)

1 Answer

Error code -12

I installed the netgear wireless card in PCI slot in my computer.

but the device manager is displaying an error that :

this device doesn't have enough free resources(error code - 12)

any solution for this?????

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

Go to control panel>> system>>hardware>> device manager.
double click on the netgear, go to resources tab, if there is conflict (it should). click on "change setting" select the memory range and the IRQ untill you see "no Conflicts" in the lower box.
close and exit. restart the machine.

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adding discrete graphics card to p6stp-fl


!O_O!

1) Unplug the computer from power.

2) Press the Power On button in, and hold it in for a count of 10 seconds. Let go. (HAS to be 10. Count)
Do this same procedure TWO more times.
(IF the Power On LED flashes for a second, keep repeating until it doesn't)

What you are doing is clearing CMOS Error Codes, and resetting BIOS Setup parameters back to the factory default settings.

3) FOLLOWING Anti-Static Precautions remove the graphics card.
Plug the monitor back into the Integrated (OnBoard) graphics, of the motherboard. (VGA connector)

4) Plug the computer back into power. WAIT 1 minute, turn the computer on.

5) When Windows has loaded wait a couple of minutes, then take that graphics card's Installation (CD) Disk, and put it in the optical drive.

If the disk doesn't start loading after 10 seconds, go to My Computer, and double-click on the drive letter, next to the optical drive, the Installation Disk is in.

When asked choose all software. Nvidia Control Panel, and drivers.

Your computer will keep on using the Integrated (OnBoard) drivers, for graphics. It will Not use the drivers, and software you are installing now, until the graphics card is physically installed.

Install all software. If you are asked to restart your computer -> NO
Close all windows, go back to your desktop screen.
Turn the computer off normally.
(Start > Turn Off Computer > Turn Off)

6) Unplug from power, follow Anti-Static Precautions.
Unplug the monitor from the motherboard. Physically install the graphics card.
Plug the monitor into the graphics card. Close the computer case.

7) Plug into power. WAIT 1 minute, turn the computer on.
You may have to go into Nvidia Control Panel, and set the correct parameters for your monitor. (Screen Resolution / Color quality )

Clear CMOS Error Codes, and reset BIOS Setup back to factory settings doesn't work?
You get to go back into BIOS Setup, and set the submenu you changed, (Or submenu's), back to the factory standard setting.
(F6?)

You are trying to use the OnBoard graphics drivers for the -> graphics card. This = NO.
You need THE drivers for the graphics card installed F-I-R-S-T.

(OnBoard. ON the motherBOARD.
Used to be used for Integrated Graphics.
Makes it easier to understand if you use OnBoard Graphics )

Why?

When a device, (In this case a graphics adapter card), is installed, Windows 'breaks it's neck' to find suitable, matching drivers.
If THE drivers are not there, Windows will match up one of it's THOUSANDS of generic drivers.

This = No.

You need THE drivers already installed. Windows looks to see what device is installed, then finds THE drivers needed.

Regards,
joecoolvette

Sep 13, 2012 | EliteGroup P6STP-FL Motherboard

1 Answer

Does the dell studio 540 pc come with a built in wireless card


The wireless card was optional for that particular computer. You can see if you have one by clicking the start button (lower left corner) right click on computer and select "manage". When the window opens click device manager in the left window and find "network adapters" in the larger center window. If you see a wireless card listed in that then you have one and it should be activated already (there's no on/off switch for wireless on a desktop). If you don't, any PCI wireless card can be purchased for 15-30 bucks. To install it, turn off and unplug your computer, take off the side panel of your machine, remove the i/o cover adjacent to the PCI slot you plan to use and insert the card into the pci slot and secure it with the screw that held the cover on. Power on your computer and run the driver installation software that came with the card you purchased.

Jul 10, 2012 | Computers & Internet

2 Answers

How do you install a 54 mbps wireless pc card (wg511) Netgear to a desktop computer?


You can use a cardbus/pcmcia to pci adapter card just like this one below:

natzki.jpg

Nov 03, 2010 | NetGear WG511 54 Mbps Wireless PC Card

1 Answer

Reformatted Windows XP does not recognize D-Link wireless adapter


I ran recently across the same problem and solved it by changing the PCI slot where the card was installed... it makes little sense to humans, but apparently make a world of difference to the PC hardware ;)
Assuming you had installed unsuccessfully both Card and Driver you have them (like I did) both on your PC. In such ase, the solution for me was as follows: 1) Turn Off PC 2) Remove the card from the current PCI slot 3) Turn PC back On and remove driver 4) Turn Off PC, remove power cord and wait a minute or two 5) Do not install card yet 6) Turn PC back On and install the driver 7) Turn Off PC remove power cord 8) Install the Wireless card in a different PCI slot THIS IS VERY IMPORTANT!!! Can't be the same slot as where it was installed before!!! Note: If you have none available swap PCI slots or remove a PCI card to free up a different slot for the wireless card... remove a card you need the least and in its place install the Dlink Card. You may want to hold off on installing in a second step the card you have just removed, to be on the "safest" side.
9) Once the card is installed, Power up your PC 10) Once windows will be back up and running the hardware wizard should kick in and tell you that new hardware was found. 11) Follow the on-screen instructions 12) click "Continue Anyway" when XP will warn you that the driver hasn't been signed 13) Installation should be completed after you click Finish at the end of the New Hardware Wizard process 14) Simply go to your wireless networks and make sure all works in order
(I know that this process may sound a bit "anal" in some steps, but I was no longer willing to deal with any possibility of problems of any kind as I was ready to rip that wireless card to shreds!)
I hope this will help those who struggled with reviving an old PC to give to a friend!

Aug 02, 2010 | D-Link AirPlus G DWL-G510 802.11g/b...

1 Answer

Need instruction on ethernet adapter


first:
there's no specific network card you should get, although you probably may want to make sure you get one that support fast ethernet and gigabit ethernet. make sure also is pci card (most of them are), the other part depends on your budget, netgear, linksys, dlinks are all great brands but the one you pick doesn't have to be.
check some options here

second:

this is how to install a nic card (network adapter / network card)

Installing Network Card
  • First step is to read the users guide and familiarize yourself with the new card.
  • Power down PC and remove the AC power cord.
  • Open the computer case.
  • Find an available Peripheral Component Interconnect (PCI) slot on the motherboard and remove slot insert if one exists.
  • Carefully remove the network card from its static-proof plastic envelope, and slide it into the slot.
    • Seat the card in the slot firmly with gentle pressure along the length of the card, especially right about the slot itself.
    • Snugly, screw the card to the computer frame, but do not over tighten.
  • Close the computer case.
  • Plug your computer in and power it up.
2Follow this procedure to verify Windows XP recognizes the new card.
  • Click Start, then click Control Panel.
  • In Category View (vs. Classic View) click Performance and Maintenance.
  • Click "System" icon at bottom of window.
  • Click the Hardware tab.
  • Click the Device Manager button.
  • Double-click Network Adapters.
    • Beneath it should appear the name of your Ethernet card.
  • Next, double click the name of your Ethernet adapter.
    • If the text in the "Device Status" box says "This device is working properly.", then you successfully installed the card and are finished.
    • If the text in the "Device status" box doesn't say "This device is working properly.", then write down on a piece of paper what it says and continue with next step.

Dec 25, 2009 | Dell Ethernet Card Network Adapter

1 Answer

Netgear ga311 will not run after install. indicates error 10


Have you removed the device via the Device Manager? And you have the newest driver available from NetGear?

Will your computer support a Gigabit adapter? Please do one more search --- your computer manufacturer --- to make sure your computer will support the new standard.

Do you have a 100 NIC you can try in your computer ...or is that what you are doing now?

Thanks for posting your question to FixYa.com

Please vote

thanks

Dec 19, 2009 | NetGear : GA311 Gigabit PCI Adapter...

2 Answers

What is PCI bus, device 16 function 1 Code 28


While I do not know exactly what would cause your computer to display that code, I can safely assume that you are using a pci sound card if you are getting a pci error, and your sound is not working. In short, yes, the pci problem is almost definitely related to your sound problem.

Sep 14, 2009 | Microsoft Windows XP Professional

1 Answer

Netgear wpn511 computer not detecting


Netgear wpn511 computer not detecting
mccree08 on Nov 26, 2008
i have an acer aspire 5315 notebook 3 months old i purchased a netgear wpn 511 rangemax wireless card to help with my signal.the software installed fine but when i look in the device drivers i dont see the card as if the computer isnt recognizing it. there are also no lights on the card when plugged in. is my express card slot not working?

Wednesday, August 05, 2009 09:55
Hello mccree08,

The installed network adapters can be viewed in the windows device manager which can be accessed through the windows control panel as follows:

•Opening the Control Panel
The Windows Control Panel can be opened by:
Selecting Start > Control Panel (on Windows Vista)
- OR -
Start > Run > Type 'Control' and select OK (on Windows XP)

•In the Control Panel, Select Device Manager

•In Device Manager, Select 'Network Adapters'

The netgear wpn 511 adapter will appear there if it is correctly installed.

If this solution is helpful please click 'YES' by 'Was this helpful?' below.

Have a great day,
martyshaw152

Nov 26, 2008 | HP ProCurve Wireless 802.11b Access Point...

3 Answers

Netgear Wireless USB Adapter wg111t; installation


Hey there Kjantzi, I have found the site for Netgear, and as I read it the update is one of the options but the drivers and firmware are there as well. Check here:
http://kbserver.netgear.com/products/WG111T.asp
Choose the version for your OS on the left, and it gives you detailed instructions, including the update process, if needed. If you still have problems let me know. Good Luck!

Mar 27, 2008 | NetGear WG111T 108 Mbps 802.11g Wireless...

2 Answers

Error code 10 Device cannot restart


Generally a code 10 refers to a dead component unfortunately.Although the card will be recognised.

Aug 29, 2006 | U.S. Robotics MAXg USR5417 802.11g/b...

Not finding what you are looking for?

Open Questions:

See all Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / Questions

Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / analog TV tuner / video input ad (1181) Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hauppauge Televison & Video Experts

Luc Francoeur
Luc Francoeur

Level 2 Expert

102 Answers

The Knight
The Knight

Level 3 Expert

73086 Answers

Lawrence Madrid
Lawrence Madrid

Level 2 Expert

67 Answers

Are you a Hauppauge Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...