Question about Projection Televisions
Most TV manufacturers no longer put headphone jacks on the TV's. None of the audio outputs will have the correct impedance for a set of headphones. The most reasonable option I think would be to see if your local electronics or audio store has a small headphone amplifier that can be plugged into the audio line out RCA jacks.
Posted on Sep 06, 2008
Tips for a great answer:
Jan 24, 2016 | Toshiba 62HM196 62" SD Television
Nov 26, 2009 | Projection Televisions
Aug 01, 2009 | Mitsubishi VS-6055 60" Rear Projection...
Jan 29, 2009 | Projection Televisions
Dec 07, 2008 | Projection Televisions
Jul 23, 2008 | Projection Televisions
Nov 18, 2007 | Mitsubishi VS-45603 45" Rear Projection...
The most common problems I have found in this model is solder joints going out in the vertical and on the driver transformer.
I would say the picture tubes are probably starting to go out by now and the technology is changing.
Look at the new sets. LCD and DLP are using LEDs.
Manufactures are beginning to equip their sets with ATSC tuners that bring in High Def. stations by using a pair of rabbit ears.
In a little over a year most signals must be High Definition and the government is supposed to send out checks for about 40.00 to help fray the costs of converter boxes to convert the older set.
So, my thoughts are, the set is about 17 years old. The cost of repari and the repair itself would be like putting a bandaid on it.
Capacitors by now are beginning to dry out and solder joints are starting to open up, not to mention that the picture tubes are getting weak and changing luminance and fading..
Most sets I repair at this age have future repairs.
Check out the new technology.
Oct 21, 2007 | Projection Televisions
54 people viewed this question
Usually answered in minutes!