Question about Sanyo DS24425 24" TV

Open Question

Lost My My T.V. Remote for my Sanyo DS 25320

I need to be able to access my TV and I have tried a Universial Remote and will not work.

Posted by on

  • lanormaile Sep 06, 2008

    I really need to use this tv and I really do not want to buy another tv

×

6 Suggested Answers

SOURCE: sanyo tv 27 flat screen

Go to:www.nodevice.com/manual/Sanyo/page5.html and download the manual.

Posted on Jan 06, 2008

jerryg50
  • 1635 Answers

SOURCE: sanyo remote control hdtv ht30744

You need the original factory remote control. Do a web search for Sanyo. Go to their tech support. They can advise you about how to order a new remote for your set.


Jerry G.

Posted on May 09, 2008

  • 1 Answer

SOURCE: have a philips universal remote control SBC RU 545 lost the book

IHAVE MATSUI DVD AND INEED ACODE

Posted on Jan 24, 2009

pishta68
  • 574 Answers

SOURCE: sanyo ds 27510 tv no remote want to setup my tv with an antennea,wont switch from video 2

If it has a MENU button, press it and use the volume up and down to manipulate the choices, press menu again when you get to channel setup. you want AIR if using off air or Cable for cable. Next screen should say start and press menu again, the channels will start to cycle. If htat doesnt do it, you have a new model than the one I just did tonight. OneForall remotes will probably not have the setup button you need to autoprogram. Best bet is to find a Sanyo made universal remote or other Sanyo remote on Ebay as alot of the buttons are proprietary to manufacturer. Some TV's are useless without their own remote if not on a external tuner (cable SAT or digital)

Posted on May 31, 2009

  • 41 Answers

SOURCE: tv code search

I can give you these. You should try them until one works hopefully. 0506, 0311, 0612, 0002, 0428, 0802, 0412, 0619. Sometime the universal remotes will not operate everything so be sure to try the power on/off and the volume and try changing channels before assuming the code is wrong. One of these should work...

Posted on Aug 04, 2009

  • 109 Answers

SOURCE: no remote

just buy universal remote. or disconect the tv
for 10 minutes and then pluging back

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to find the code for mySanyo TV for a universial remote. Can anyone help me please?


http://sanyoservice.com/partsinquiries.cfm

go to that site and search your remote codes , Or if you send me the model number and brand of your remote I can help you

Philctr1982@yahoo.com

Mar 11, 2010 | Sanyo DS31520 31" TV

2 Answers

Digital?


No sorry to dissapoint DS is short for Definition STANDARD ... and is a cheap 20 inch model assigned to category 2 of televisions. To improve its reception you could apply a Digital setop box to it to get all the additional channels seen on a Digital. Probably last longer than most new plasmas and LCD's as this is quite a robust little TV.

Please rate my help++++Thanks for using FIXYA

Nov 28, 2009 | Sanyo DS20930 20" TV

1 Answer

Set t.v /remote to work with other components


Do you have a Sanyo Universal Remote ? If not, you program your dish 500 remote for these.

Sep 16, 2009 | Sanyo DS31590 31" TV

1 Answer

Remote works sometime but not always


1. replace with fresh alkyline batteries.
2. If you have fluorescent lights, they will interfere with the remote.
3. Turn OFF lights, remote will work. Turn ON lights, the remote may not work well.

The "code" depends on the Remote brand/model.
Different maufacturers of remote control units don't use the same code numbers (there is no standard remote code for any TV).

Hope this helps!

Sep 08, 2009 | Sanyo DS27510 27" TV

1 Answer

Need to know how to program rca universial remote to sanyo 27inch


First off. What kind of RCA remote. and second 1.Turn on the TV 2. Press and hold the TV button 3. Enter the 4 digit code *1004,1048,1049,1050,1080,1107,1108,1162,1169,1180
4. Press the on off button (may need to press twice) 5. if nothing works try entering another code.
Note: your remote may only need a 3 number code. but most require 4

Mar 10, 2009 | Sanyo DS27510 27" TV

6 Answers

Need tv code for remote control


¿Porque siempre preguntan por el codigo para el control pero nunca ponen el nombre del control y el modelo ?

Mar 17, 2008 | Sanyo DS19310 19" TV

1 Answer

DS 27930 remote control


My problem is this TV of ours does not work now so if I cannot get it fixed I guess you can buy our remote control.  
Doopey

Feb 17, 2008 | Sanyo DS27930 27" TV

1 Answer

Sanyo DS31350 31" TV problem


you need to buy the sanyo remote from www.sanyo.com

Dec 14, 2007 | Sanyo DS31590 31" TV

2 Answers

SANYO DS32224


I have this problem as well..have tried many universal remotes..still cant access menu options

Dec 02, 2007 | Sanyo DS31520 31" TV

Not finding what you are looking for?
Sanyo DS24425 24" TV Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...