Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washing machine stops during wash cyle and won't turn back on

Emptied water and still would'nt turn on; is there some sort of reset?

washer listed below is to get past product list

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 166 Answers

Peace Friend,
ngafm At your service!



First unplug the washer and wait a 5 minutes then restart it like rebooting your computer when its acting strange!
If it corrects the problem GREAT!!! WE WIN!


If not only a trained laundry tech can make the electronic diagnoses.
Like we used to be able to fix my own cars, but not today they need diagnostic equipment!


How old is the washer?

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!


You will be fine
Bless You ngafm
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF!!!!!!!!!!!!!!!!!

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the reset button for a kenmore 80 washer wont stop filling water level


If this is a top loader then the vacuum line has come off of the dashpot or the water level switch is broken. UNPLUG the power-Standing in front of the washer, pry off the plastic trim strips on the left and right of the dash (control panel) Now you'll see a screw at the bottom where the strips mounted, remove ans KEEP the screws, now the dash will lift up and fold back, giving access to the parts.

Aug 17, 2014 | Kenmore series 80 Washer Motor 3363737-

1 Answer

Kenmore washing machine 80 series won't spin or add water to the tub


Plug on motor (Multi-plug) may have a burnt out wire as it has different speeds. Remove and check the plug (top comes off). Any burnt wire needs to be cut back to clean copper and refitted into plug.

Dec 07, 2013 | Kenmore Washing Machines

2 Answers

Kenmore washer won't stop filling during initial wash cycle


I had the same problem too on one of my washers (not kenmore) it didn't complete cycle because someone turned off the hot water valve. soo i turned on the hot water and it worked fine. keep in mind that mine wasn't a kenmore. hope this helps some...

Oct 08, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series mod 110225842400 stopped working during cycle. Tub won't drain and will not agitate.


Hi, When the washer is in spin or wash cyles, do you here any motor noises? It sounds like the lid switch might be bad. Sometimes you can actually see if the lid switch is broke or not. Please let me know if The lid switch appears to be the problem or if I can assist you further.

Vic

Jun 20, 2009 | Kenmore 20172 Top Load Washer

1 Answer

Kenmore 80 series front loading washer


The pressure switch is likely failed.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 31, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 80 Series top loading washer--will not stop filling with water at the beginning of the wash cycle and for the rinse cyle. Is there an easy fix or should I purchase a new washer? How much can I


The pressure switch is failed - remove the tube from inside the top console area and blow it out. If you're lucky it will again work - with no charge.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 31, 2009 | Kenmore Washing Machines

1 Answer

Kenmore washer 80 series misses spin during wash.


You may need to replace the motor coupling between the pump and motor...

Apr 07, 2009 | Kenmore Washing Machines

3 Answers

Kenmore 80 series washing machine


Marrr
Ingllis washers have a bad habit of picking up socks, small items anyway in the drain protector hose, slows down water flow but ensures the items dont get sucked into the impeller.
from the underneath you shhould be able to see a clear cup sized container with a hose in the side, held in with hose clamps. check if this is filled with any clothing, undo the hose clamps and you should bew able to empth the cup with fingers

Apr 06, 2008 | Kenmore 24902 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...