Question about DISH Network IR Remote Control

1 Answer

AUX I would like to know how to program the AUX button so I can control my DVD player with the same remote. I have the 3.0 IR. The DVD player is a Phillips.

Posted by on

  • kev4234 Sep 05, 2008

    If anyone can give me a hand that would be great. Thanks

  • kev4234 Sep 08, 2008

    That was a big help thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Auto program dish remote 21.0 IR/UHF Pro to Epic Sound Receiver


DD Cox,

I can definitely provide more information. Without knowing the model of the sound system, I am unable to provide specific codes. Below I will include a link to lookup codes, as well as the steps to address the remote.

Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to DVD:

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 2 and enter the code. (Example: If the code is 639, enter 2639)
4.) Press pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.

Let me know if you have any other questions!

Tommy Faust
DISH Social Media Representative

Jan 22, 2013 | DISH Network IR Remote Control

1 Answer

How do I set up a dish network remote control for a dvd?


Juan Prieto,

I would be happy to provide both of those requests for you. Below is a link where you can get codes for any equipment, and the steps are below that!

Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

Addressing Remote to DVD:
1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 1 then enter the code and press the Pound (#) button. The AUX button should flash three times.
4.) Try functions (Power, etc..) and see if working.

If you have any other questions or need further assistance let me know here!

Tommy Faust
DISH Internet Response Team
5.) If no function, repeat steps 1-4 with another code.

Dec 12, 2011 | DISH Network IR Remote Control

1 Answer

Programming a 4.0 remote to control dvd player


I came across your post, hollie ann dreier, and wanted to provide some assistance! Here's a list of steps for you to take to get the remote programmed to your DVD player:

  1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release.
  2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
    • Press 0 for a TV
    • Press 1 for a VCR/DVD
    • Press 2 for any other device
    Then Press STAR (*)
  3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
  4. Press the POUND (#) button. Note: If the code entered is valid for the remote, the mode light flashes three times.
Let me know if you have any questions as I would be happy to help further!

Oct 08, 2011 | DISH Network IR Remote Control

1 Answer

I need a code for Symphonic DVD that works with Dish Network


Hi, Cheri Torres with DISH Network Customer Service here. I came across your post recently and wanted to see if I could help. For each of our different models of remotes we have a few different codes that could work with a Symphonic DVD player. I will list here for you the best codes for our more popular models of remotes and also the instructions for programming the remote to your DVD player. I hope this information helps you and if you have any further questions or concerns feel free to ask! :)

Remote model # Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 1688, 1683, 1588, 1594.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 1632, 1522, 1300, 1588, 1594 1624, 1692.
4.0 and 4.4 IR/UHF remotes - codes 1632, 1569, 1733, 1569, 1846.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 1733, 1632, 1694, 1588, 1594, 1756.
20.0 IR and 21.0 IR/UHF remotes - codes 1658, 1588, 1804, 1531, 1617, 1619.

Instructions for addressing the remote to the DVD player
  1. Press and hold the AUX mode button until all mode button back lights come on, then release.
  2. Use the number buttons to enter the device code corresponding to the equipment.
    Note: The light will blink off after each digit is entered and then return to a steady light.
  3. Press the POUND (#) button.

    If the code entered is valid for the remote, the mode light flashes three times.

Aug 20, 2011 | RCA 3-Device Universal Remote with...

1 Answer

Want to program dish remote to lg dvd player


Hey bcl9113!

We can definitely get that remote programming to your LG DVD player. As we currently don't have any LG codes the steps below will show you how to Power Scan the code to your remote.

Power Scan:

1.) With the desired equipment on, press and hold the desired mode button (about six seconds) on top of the remote until all mode button backlights come on, then release.

AUX Mode:
Press 0 for a TV,
Press 1 for a VCR/DVD,
Press 2 for any other device,
Then press STAR (*)

2.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
3.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

Hope that helps! If you require further assistance you can post here or email me at thomas.faust@dishnetwork.com.

Jun 20, 2011 | DISH Network IR Remote Control

1 Answer

How do i program my remote


Hello;

Without knowing the codes for the specific brand names and models of your devices, this is how you program the Zenith MBR3447 for your TV, VCR, DVD Player, CD Player or Audio Receiver:

TV

1. Push the "Power" button on the TV to turn it on.
2. Press and hold the "PRG" button in the upper left corner of the remote. Release when the indicator light, located in the top center of the remote control, comes on.
3. Push the "TV" mode key located at the top of the remote.
4. Enter 0 -- 0 -- 0 on the remote's number pad, then press the "Enter" button.
5. Aim the remote control in the direction of the TV's IR sensor and push the "Power" button. Pause a second. If the TV fails to shut off, push the "Power" button again. Repeat until the TV does shut off. Each time the "Power" button is pressed the Zenith MBR3447 tries using a different TV device code from its code library to turn the TV off. Therefore, when the TV finally does shut off it's an indication that the remote is temporarily programmed with the correct device code to control the brand of TV you're using.
6. Press "Enter" to save the current code.

VCR

1. Push the "Power" button on the VCR to turn it on.
2. Press and hold the "PRG" button in the upper left corner of the remote. Release when the indicator light, located in the top center of the remote control, comes on.
3. Push the "VCR" mode key located at the top of the remote.
4. Enter 0 -- 0 -- 0 on the remote's number pad, then press the "Enter" button.
5. Aim the remote control in the direction of the VCR's IR sensor and push the "Power" button. Pause a second. If the VCR fails to shut off, push the "Power" button again. Repeat until the VCR does shut off. Then press "Enter."

DVD Player, CD Player or Audio Receiver

1. Push the "Power" button on the device your programming the remote to control to manually turn it on.
2. Press and hold the "PRG" button in the upper left corner of the remote. Release when the indicator light, located in the top center of the remote control, comes on.
3. Push the "AUX" mode key located at the top of the remote.
4. Enter 0 -- 0 -- 0 on the remote's number pad, then press the "Enter" button.
5. Aim the remote control in the direction of the device's IR sensor and push the "Power" button. Pause a second. If the device fails to shut off, push the "Power" button again. Repeat until the device does shut off. Then press "Enter."

Mar 11, 2011 | Zenith MBR3447 Remote Control

1 Answer

Hi I'm looking for panasonic dvd player for my 301 remote


rammer3211

Here are the codes for a Panasonic DVD player:

639, 662, 663, 714, 715, 716, 717, 734, 765

I have also provided instructions on how to program the remote to your Panasonic DVD player. I hope this helps.


Programming your remote:

Address To Other Equipment Using Code
  • Remotes: Multiple Mode Buttons (TV,VCR, AUX)
    1. Press and hold the desired Mode button until all mode button backlights come on, then release.
    2. Use the number buttons to enter the device code corresponding to the equipment. AUX Mode: Before entering the device code:
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device.
    3. Press the pound (#) button Note: The light will blink off after each digit is entered and then return to a steady light.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Ray Calo
DISH Network

Nov 15, 2010 | DISH Network IR Remote Control

1 Answer

Replaced a Dish VIP722 with the new VIP722k,--got new remotes, also have a Bellvu 3100 on same primary TV. Used to be able to use one remote to control either recever boxes. How to I add the 3100 to the...


d1032d_junk3

If you are using the remote to operate an IR frequency, you can program that component to the VCR or AUX button on the new remote. I have provided the instructions on how to program the remote. I hope this helps.


Address To 2nd IR Receiver Using AUX Mode
  • Remote: 3.4, 4.4, 5.3, 5.4, 6.3, 6.4, 20.0, and 21.0
    1. Go to 2nd IR receiver
    2. Go to System Info Screen
    3. Hold down the AUX button until all mode lights light up.
    4. Press 3 then enter a number between 1 and 15 using the numeric keypad on the remote.
    5. Press the pound (#) button
    6. Once the AUX button blinks three times, press record. Note: If successful the number selected in step 4 will appear in the System Info screen under Remote Address.

Ray Calo
DISH Network

Jun 13, 2010 | DISH Network IR Remote Control

2 Answers

How to use your control with my dvd player


Hello chegui59, my name is Michael Hurst with DISH Network. There are 2 ways of programming your remote to your DVD player. You can use a remote code for your DVD player. In order to give you the right remote code I would need to know the manufacture of your DVD player and the model of the remote that you have. You can also try a Power Scan to get the DVD player programmed into your DISH remote, here are the steps: Withthe desired equipment on, press and hold the correct mode button until all modebutton backlights illuminate, then release. Press and release the Power button. AUX Mode: Before pressingand releasing the Power button. Press 0 for a TV, Press 1 for a VCR/DVD andPress 2 for any other device. Then Press STAR (*). Press the Up button once asecond while pointing the remote at the desired equipment. If the code for theequipment comes up, the equipment will power off. Press the POUND (#) button. Ifthe code entered is valid for the remote, the mode light flashes three times.

May 29, 2010 | DISH Network IR Remote Control

1 Answer

HOW DO I PUT A CODE TO PROGRAM MY DVD PLAYER WITH THIS DISH 20.01 REMOTE


Hello djdannyvey, my name is Michael Hurst with DISH Network. On your remote there should be a DVD button on the top of the remote. There are 2 ways you can program remote to your DVD player. You can use a remote code for the model/maker of the DVD player, to do this hold the DVD button down until all buttons on top of remote light up. Let go of button and put in the code. Then press # button and then the Record button. The next option is a power scan. Withthe desired equipment on, press and hold the correct Mode button until all modebutton backlights illuminate, then release. Press and release the Power button.AUX Mode: Before pressing and releasing the Power button, Press 0for a TV, Press 1 for a VCR/DVD, Press 2 for any other device. Then Press STAR(*) Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff. Press the POUND (#) button. If the code entered is valid for the remote,the mode light flashes three times.

Apr 13, 2010 | DISH Network IR Remote Control

Not finding what you are looking for?
DISH Network IR Remote Control Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...