Question about Washing Machines

2 Answers

Belt broke how do i get to it - Washing Machines

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Front loader washing machine westpoint WMC560S requires a front door
rubber. Can I get one?

Posted on Sep 04, 2012

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

Dear afcwoboy_02,
u can contact the authorised service centers.they wilhave spare parts. else tel me from which part u are from. i'l tel the nearby service centers..

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The tub does not turn in the rinse/spin cycle but the motor is running.


Hello Jwwood,

Your Frigidaire GLTF2940F washer is not moving when it is washing clothes. This is because the belt is broke you can locate the belt on RepairClinic.com. Before you order the belt you need to findout the length as there are many different lengths and styles. In order to get to the belt you need to remove the back of the unit. If it is broke as I beleive measure and post back to this thread or go to the following link find the proper size and order. LInk - http://www.repairclinic.com/Frigidaire-Washing-Machine-Belt-Parts


Thank you for choosing FixYa.com

Mar 06, 2011 | Frigidaire GLTF2940F Front Load Washer

1 Answer

Wont wash dry or spin. Motor runs. I think my son overloaded the machine. Could the belt be broken?


Hi there
i read your report. Yes it dose sound like your belt has broke.If you can spin the dryer with your hand with no Resistance then it's your belt that's broke. hope this info helps. Ty you for writing to fix ya.

Best Regards Richard

Dec 03, 2009 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

The gears are turning but the belt is not is my belt bad


if motor is turning and motor pulley and the belt isn't moving it could be broke belt but does the belt look loose or is it loose make sure it has tension on the belt

Sep 07, 2009 | Amana Washing Machines

1 Answer

Replaced belt but machine will not agitate or spin , but does let water in it


if it is a topload u have a bad transmission thats what broke the belt was trying to spin and couldnt

Apr 16, 2009 | Washing Machines

1 Answer

The belt in my washing machine just broke


Try this number; 0818 313413
This is Hotpont service in Dublin.
Plz rate my soution.
Thanks.

Jan 14, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

The belt from an Indesit washing machine broke a wire


The wire you refer to is an earth wire, it has probably pulled of the motor or the frame of the m/c.
If you can't see where it came from, don't worry too much, all you need to do is fasten it to a metal part of the m/c so that is is making a contact to earth.
I assume that you can get a belt o/k
Make sure that the drum and motor are free before you fit new belt.
Plz rate my solution
Thanks.

Dec 23, 2008 | Indesit Washing Machines

1 Answer

The belt on the washer broke it is a whirpool GHW9400PL4 I have the back off and do not see how to tension the belt


Hello ctwconstruct
Welcome


You said, the belt on the washer broke it is a whirlpool GHW9400PL4 you have the back off and do not see how to tension the belt

At this site you will find all the diagrams on the left side of this page which you can scroll down on and click the one you want to see enlarged .

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=504601

Happy to help you.
let me know how you do!
Huuum,
Please remember to leave a rating!

Oct 13, 2008 | Whirlpool Washing Machines

1 Answer

Maytag Performa PAV2300AWW screaching noise, belt problem, pulley broke


My Maytag Performa was making the loud squealing noise. I changed out the water pump/bearing, took care of the problem.
Putting a new belt on just help burn up the bearing (they needed replacing) and probably ruined the new belt. Probably seized the water pump bearing and the belt jumped and broke the motor pully. A washing machine motor is very strong, when that h20 pump bearing seized (or possibly some bearings jamed up) the motor kept on turning that belt and the plastic pully gave in. You'll need to replace that also. If the h20 pumb bearing is turning freely, likely the bearings jammed up but or now loose. That bearing should be tight, no slack or play in it. You can probably wobble the pully on it all around while turning it. The slightest slack is too much.

Oct 09, 2008 | Maytag Performa PAV2200

1 Answer

Fisher and Paykel GWL11 Question


no belts ..direct drive ..lean washer back pump is a twist lock no tools needed hose clamp can be removed with fingersremove pump and ck for lock impeller also ck the diverter valve just behind pump

Jul 16, 2008 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Does not spin out all the water


Sorry RickAZ, I have just joined the fixya family. I'm trying to get old unsolved problems off the list, so I'm just posting a fix. Congratulations on your replacement washer.

Jan 03, 2008 | Amana ALW480DA Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...