Question about Motorola Mobility Q9m Smartphone

1 Answer

Using my Motorola Q9C as a dialup modem

I can connect my PC thru the USB port to the Q9C phone, and sent AT commands but unable to get the phone to dial or if the manually dialed the phone falls to response to the answer-back tone from the far end modem, What can I do to correct this issue ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Simple way is to get the program called pdanet
this will give you a 15 day trial but with the other program runasdate you might be able to extend it ;)

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the unlcok code for a huawai valiant


The unlock code for every individual mobile phone is unique and based upon the IMEI number of the device. You can visit ClassicUnlocking.com submit the required details and get the accurate unlock code at affordable cost. Good luck.

-<()>--<()>--<()>--<()>--<()>--<()>--<()>-
..............UNLOCKING INSTRUCTIONS..............
-<()>--<()>--<()>--<()>--<()>--<()>--<()>-

f your Huawei Device is a mobile phone:
1.Switch on your Huawei Phone using another networks SIM card.
2.Your phone should ask for an unlock code(NCK Code).
3. Enter the unlock code we sent you.


If your Huawei Device is an USB modem, please follow these instructions:
If your modem software asked for an unlock code when you tried using another network's SIM card, directly enter the unlock code we sent you when prompted by the software.

Otherwise try one of the following
Method 1:
This method requires your PC to have a software called Hyperterminal which can be found on the Start Menu in Windows XP, 2003 and other older versions of Windows:
Start - > Programs -> Accessories - > Communications - > Hyperterminal
1.Remove all other modems, printers and other devices connected to your PC other than your monitor, keypad and mouse.
2.Start your pc, connect your USB modem and open Hyperterminal.
3.Enter any name and select any icon and click OK to continue.
4.Set Connect using to your modem port, Huawei Mobile Connect - 3G Modem or the right COM port.
5.In the properties window that opens, without changing any values, click OK to continue.
6.Type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
and press enter.
7.Your modem should now be unlocked. Close Hyperterminal, disconnect your modem and connect it again.

Method 2:
Use this method if Method 1 does not work or if you are not able to follow method 1.
If your PC does not have Hyperterminal or if your using Windows Vista or Windows 7 you can use the following method.
1.Download our Modem Communicator Application. This application has been scanned by Mcafee and contains no virus. For your safety, please scan the application again after you download it.
2.Switch off your PC, remove all other modems, printers and other devices connected to your PC except your monitor, keypad and mouse.
3.Start your pc, connect your USB modem and open the application you downloaded(mc.exe).
4.Click on the Check for Ports button and wait for the response.
5.Click on the Check for Modems button and wait for a response.
6.Click on the Send AT Command button and make sure you get the response "OK".
7.In the text-box next to the Send User Command button, type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
8.Click on the Send User Command button.
9.Your modem should now be unlocked. Close the application(Modem Communicator), disconnect your modem and connect it again.

Jul 29, 2014 | Huawei MetroPCS M735

2 Answers

PLEASE help unlock my device E5331s-2 IMEI::860667017553111


Hi. You can unlock your Huawei E5331S-2 safer and easier using unlock code. You can get the unlock code for a Huawei E5331S-2 from SimpleUnlocking.com at affordable cost.

-<()>--<()>--<()>--<()>--<()>--<()>--<()>-
..............UNLOCKING INSTRUCTIONS..............
-<()>--<()>--<()>--<()>--<()>--<()>--<()>-

If your Huawei Device is a mobile phone:
1.Switch on your Huawei Phone using another networks SIM card.
2.Your phone should ask for an unlock code(NCK Code).
3. Enter the unlock code we sent you.


If your Huawei Device is an USB modem, please follow these instructions:
If your modem software asked for an unlock code when you tried using another network's SIM card, directly enter the unlock code we sent you when prompted by the software.

Otherwise try one of the following
Method 1:
This method requires your PC to have a software called Hyperterminal which can be found on the Start Menu in Windows XP, 2003 and other older versions of Windows:
Start - > Programs -> Accessories - > Communications - > Hyperterminal
1.Remove all other modems, printers and other devices connected to your PC other than your monitor, keypad and mouse.
2.Start your pc, connect your USB modem and open Hyperterminal.
3.Enter any name and select any icon and click OK to continue.
4.Set Connect using to your modem port, Huawei Mobile Connect - 3G Modem or the right COM port.
5.In the properties window that opens, without changing any values, click OK to continue.
6.Type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
and press enter.
7.Your modem should now be unlocked. Close Hyperterminal, disconnect your modem and connect it again.

Method 2:
Use this method if Method 1 does not work or if you are not able to follow method 1.
If your PC does not have Hyperterminal or if your using Windows Vista or Windows 7 you can use the following method.
1.Download our Modem Communicator Application. This application has been scanned by Mcafee and contains no virus. For your safety, please scan the application again after you download it.
2.Switch off your PC, remove all other modems, printers and other devices connected to your PC except your monitor, keypad and mouse.
3.Start your pc, connect your USB modem and open the application you downloaded(mc.exe).
4.Click on the Check for Ports button and wait for the response.
5.Click on the Check for Modems button and wait for a response.
6.Click on the Send AT Command button and make sure you get the response "OK".
7.In the text-box next to the Send User Command button, type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
8.Click on the Send User Command button.
9.Your modem should now be unlocked. Close the application(Modem Communicator), disconnect your modem and connect it again.

Jul 14, 2014 | Huawei Unlocked E5331 Wireless Hspa 21m...

1 Answer

Unlock huawei E353Tu-6 mobem


HUAWEI E353 TU-6 and Huawei E353 are same modem...You can Unlock it using the Unlock Code...Visit the site Prounlocking.com/huawei-modem-unlocking-service/rs8wp10/ get the Unlocking service for your HUAWEI modem and unlock it from service provider lock.Follow the instructions below and unlock it step by step...


If your Huawei Device is an USB modem, please follow these instructions:
If your modem software asked for an unlock code when you tried using another network's SIM card, directly enter the unlock code we sent you when prompted by the software.

Otherwise try one of the following

Method 1:
This method requires your PC to have a software called Hyperterminal which can be found on the Start Menu in Windows XP, 2003 and other older versions of Windows:
Start - > Programs -> Accessories - > Communications - > Hyperterminal
1.Remove all other modems, printers and other devices connected to your PC other than your monitor, keypad and mouse.
2.Start your pc, connect your USB modem and open Hyperterminal.
3.Enter any name and select any icon and click OK to continue.
4.Set Connect using to your modem port, Huawei Mobile Connect - 3G Modem or the right COM port.
5.In the properties window that opens, without changing any values, click OK to continue.
6.Type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
and press enter.
7.Your modem should now be unlocked. Close Hyperterminal, disconnect your modem and connect it again.

Method 2:
Use this method if Method 1 does not work or if you are not able to follow method 1.
If your PC does not have Hyperterminal or if your using Windows Vista or Windows 7 you can use the following method.
1.Download our Modem Communicator Application. This application has been scanned by Mcafee and contains no virus. For your safety, please scan the application again after you download it.
2.Switch off your PC, remove all other modems, printers and other devices connected to your PC except your monitor, keypad and mouse.
3.Start your pc, connect your USB modem and open the application you downloaded(mc.exe).
4.Click on the Check for Ports button and wait for the response.
5.Click on the Check for Modems button and wait for a response.
6.Click on the Send AT Command button and make sure you get the response"OK".
7.In the text-box next to the Send User Command button, type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
8.Click on the Send User Command button.
9.Your modem should now be unlocked. Close the application(Modem Communicator), disconnect your modem and connect it again.

Oct 12, 2012 | T-Mobile Huawei T-Mobile Webconnect USB...

1 Answer

I need the sim unlock pin code so i can switch over to Tmobile without getting a new phone.


Hi, You can get the unlock code for a Huawei U8652 Fusion from www.unlocking4u.com/huawei-fusion-u8652/rs6wp9/ at affordable cost.
Here are the steps for unlocking a Huawei U8652 Fusion,
Method 1:
This method requires your PC to have a software called Hyperterminal which can be found on the Start Menu in Windows XP, 2003 and other older versions of Windows:
Start - > Programs -> Accessories - > Communications - > Hyperterminal
1.Remove all other modems, printers and other devices connected to your PC other than your monitor, keypad and mouse.
2.Start your pc, connect your USB modem and open Hyperterminal.
3.Enter any name and select any icon and click OK to continue.
4.Set Connect using to your modem port, Huawei Mobile Connect - 3G Modem or the right COM port.
5.In the properties window that opens, without changing any values, click OK to continue.
6.Type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
and press enter.
7.Your modem should now be unlocked. Close Hyperterminal, disconnect your modem and connect it again.

Method 2:
Use this method if Method 1 does not work or if you are not able to follow method 1.
If your PC does not have Hyperterminal or if your using Windows Vista or Windows 7 you can use the following method.
1.Download our Modem Communicator Application. This application has been scanned by Mcafee and contains no virus. For your safety, please scan the application again after you download it.
2.Switch off your PC, remove all other modems, printers and other devices connected to your PC except your monitor, keypad and mouse.
3.Start your pc, connect your USB modem and open the application you downloaded(mc.exe).
4.Click on the Check for Ports button and wait for the response.
5.Click on the Check for Modems button and wait for a response.
6.Click on the Send AT Command button and make sure you get the response "OK".
7.In the text-box next to the Send User Command button, type the following command(replace the word UnlockCode with the unlock code we sent you):
AT^CARDLOCK=UnlockCode
8.Click on the Send User Command button.
9.Your modem should now be unlocked. Close the application(Modem Communicator), disconnect your modem and connect it again.

Sep 22, 2012 | Huawei U8652 Fusion Blue/blackandroid In...

2 Answers

I want pc setting for bsnl gprs.


# Basic Requirements:

1. A Web Enabled Phone that can be connected to the PC using a data cable, bluetooth or infrared

2. A GPRS activated mobile connection

# Procedure:

1.GPRS activation

In BSNL the balance should be more than Rs. 50 for the GPRS to remain activated. To activate GPRS an sms has to be sent: "GPRS E" to 53733 [removing the quotes]

The usual cost is 2 paise/ Kb. But BSNL has an offer which provides 30 days unlimited net for Rs 189 [by easy recharge from an BSNL outlet] and probably Rs 51 for 7 days unlimited net.

2.Connecting the phone to the PC

The phone can be connected to the PC using the USB data cable, bluetooth or infrared with the help of the driver tools provided with the phone. Hence the phone will be ready to be used as a USB modem connected to the PC.

3.Settings for the Modem on the PC

Start > Settings > Control Panel > Phone and Modem Options > Choose your modem > Click Properties > Choose tab Advanced > At Extra initialization commands, enter code:AT+CGDCONT=1,"IP","www.e.pr" > OK

4.Setting up an internet connection

Though an internet connection can be setup for Motorola MotoRokr E6 using the PhoneTools software provided with the phone, in any usual phone a new connection has to be setup using the DialUP Networking function of Windows using the following process:

Start > Control Panel > Network Connections > New Connection Wizard > Next > Connect to the Internet > Next > Set up my connection manually > Next > Connect using a dial up modem > Next > Choose your modem > Next > Type "bsnl-gprs" > Next > Type "*99#" or "*99***1#" or "*99***2#" or "*99***3#" > Next > The Username box can be left blank > The Password box can be left blank > The Confirm box should left blank too > Next > Finish

While using the setup process through the mobile PhoneTools the following data may be used:

Username : <blank>

Password : <blank>

Access Point Name[APN] : www.e.pr

5.Browser Configuration

In the browser used on the PC, certain proxy configuration must be made in the "Tools>Options>Advanced>Network>Connection Settings" button for Firefox and in the "Tools>Internet Options>Connection Settings>DialUp and Virtual Private Network Settings>Settings" button for Internet Explorer :

Proxy server : 192.168.81.163

Port : 8080

But sometimes this process works without this proxy configuration thus providing better speeds.

Now u r ready to go, connect the net and surf your way through. The net though gets connected at 115.2 Kbps but you will get nothing close to it. Though this net is good for surfing and casual downloads but sites loaded with heavy images and graphics are hard to open eg. Orkut etc. Hope you find this article useful.

Mar 12, 2011 | Computers & Internet

1 Answer

I want download usb modem drivers for windows 7, for connecting internet through my lg kg195 mobile


Make sure that you can see the phone's modem in the modem section of device manager(Preset in Control Panel). For airtel connection you have to enter the APN(Access Point name) as "airtelgprs.com" in the PC suite to connect to internet and the dialup number is *99#.
If your pc suite dont have a option for entering the APN then you can manually enter it here-->Go to Control Panel>>Device Manager>>Your phone's modem Properties>>Advance tab>>In Extra Initialization Commands enter this (+CGDCONT=,,"airtelgprs.com") without brackets and create a dialup connection with *99# as dialup number using ur phone's modem, Username n Password field should be blank.

Oct 02, 2010 | Computers & Internet

1 Answer

Hi I have downloaded the pc suite for lg kg 195 but I am not able to connect to the internet. It's not able to establish the dial up connection. Please help me to connect using airtel sim.


Make sure that you can see the phone's modem in the modem section of device manager(Preset in Control Panel). For airtel connection you have to enter the APN(Access Point name) as "airtelgprs.com" in the PC suite to connect to internet and the dialup number is *99#.
If your pc suite dont have a option for entering the APN then you can manually enter it here-->Go to Control Panel>>Device Manager>>Your phone's modem Properties>>Advance tab>>In Extra Initialization Commands enter this (+CGDCONT=,,"airtelgprs.com") without brackets and create a dialup connection with *99# as dialup number using ur phone's modem, Username n Password field should be blank.

Sep 22, 2010 | LG KG110 Cellular Phone

6 Answers

MOTOROLA W230


I HAVE SOLVED THIS PROBLEM. before installing this driver uninstall all motorolla driver. and install only charging driver.
after then install the driver file named 'moto_w230_gprs.inf' (available on internet) on same port on which charging driver is installed yhen write the code" AT+CGDCONT=1,"IP","INTERNET" in extra initialization string on modem. (internet is access point network) use another if u have other networks

set the baud rate of ur modem 230kbps
write the user name andf password
and fone number '+cgdata' without quotes and then try
i have cheked on telenor pakistan its working fine


Best Regards


Engr. Tarique R. Memon

Aug 05, 2008 | Computers & Internet

7 Answers

Want to connect motorola w230 to internet with USB


I want to connect motorola w230 mobile to internet by using usb.so how can i connect and from where i can get software(Modem driver) for that.

Jul 01, 2008 | Motorola Mobility W230 Phone US with...

2 Answers

Motorola cell phone W230


I own MotoYuva W230 and am also struggling to do the same.
The W230 seems to have builtin modem.
First of all we need to install the drivers from www.motorola.com/support/w230 and download the file from link USB modem drivers. Install it and it will create a virtual COM port for the modem.
Open HyperTerminal and try to connect to the port it. You can check the actual port number from "device manager" on WinXP.
Once you connect it will say "AT command Interpreter ready"
Here you can give commands
at+cgatt
OK
at+cgact
OK
at+cgdata
OK
after last command if your GPRS is active, the icon on topline will change to connected.
This hints to presence of GPRS modem but I am still not able to connect using my phone.
Please update anyone can indicate way forward.
Taking From :
http://news.softpedia.com/news/Motorola-MotoYuva-W230-Entry-level-Music-Phone-78060.shtml

Mar 27, 2008 | Cell Phones

Not finding what you are looking for?
Motorola Mobility Q9m Smartphone Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Computers & Internet Experts

Motorola Mobility
Motorola Mobility

Level 3 Expert

1623 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

AJMAL KHAN

Level 2 Expert

382 Answers

Are you a Motorola Mobility Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...