Question about Ovens

1 Answer

Panel on double oven will not work except for one button and the clock

Hi, my ovens have been working properly. Now, the only button that works/beeps on the panel it the clear/reset. I have checked the breaker box and the breaker it on. The clock on the panel works.

Posted by on

  • ann626 Sep 05, 2008

    HI, the button says clear/start and it beeps and the clock is showing, but no other buttons work. The oven has been working properly, I suspect one of the power outages during the storm. The breaker is working.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Press and hold the clear/reset button for about seconds see what happens.
Regards

Posted on Sep 05, 2008

  • D Clare Sep 05, 2008

    I meant 5 seconds

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our monogram double wall oven has a f7 code on the control panel. None of the buttons appear to be working, except clear, which clears the code. Then still no buttons work, and the f7 code comes back. What...


It's most likely that the error code you are seeing is F1, not F7. F1 is a code for 'stuck touch pad'. You will need to replace the clock/ERC or the touch pad (or both).

Feb 28, 2011 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

F1 error/touch panel not working on GE Monogram Dual Oven


Usually, the F1 means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled, replace the oven control (also called clock or ERC), touch pad, or both.

I recommend a service call for this repair.

Jun 02, 2009 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

The F7 code appears with a beeping noise. How do I turn off the beep for good.... selecting clear/off only works for a few seconds


Hi,

Well, F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.

Thanks

May 27, 2009 | GE Built-In 24" Double Electric Wall Oven

2 Answers

Clock on cooker flashing


Hi,

Just to let you know that i have solved the problem with my cooker, (clock flashing after electric going off) i held down the cook period button and the end time button, then i was able to reset the clock by pressing the +button.

Apr 28, 2009 | Hotpoint UY46 Style Line Stainless Steel...

1 Answer

Lights grill and fan work but oven isnt heating up


Hi there,

On our oven, we have to reset the clock before the oven will work. I think it's because of the automatic timer features.

Yours is a slightly different model, but on ours we have to press the two buttons with arrows on, at the same time as turning the clock dial. Once this is done, the oven should work again.

Good luck.

Jan 04, 2009 | Neff U1721 Double circotherm Electric Oven

2 Answers

Wall Oven won't work


I tried randomly pushing 2 buttons at a time, and when I pushed "Timer Off/On" and "Cancel" together it unlocked and is now working fine. The following day it beeped a lot for an hour or so (must have been catching up on previous pushes) but now is back to normal.

Mar 14, 2008 | Tappan 30IN ELEC IGNa Oven

1 Answer

Time display


if the-at doesn't work sounds like you inadvertently turned of the display for clock try holding the clock button for 3-5 secs itll beep and remain on then

Mar 09, 2008 | KitchenAid KEBC247 Electric Double Oven

3 Answers

Jenn-Air WW30430W double oven flashing F7 and beeping


It seems you have a stuck button. Here is a list of fault codes:

JENN AIR
Range/Stove/Oven Fault Codes
Failure
Code
Condition Check/Repair F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad) F1 Watchdog on board Replace touch pad or clock assembly (also called the ERC) F2 Oven too hot Replace relay board (if present) or oven temperature sensor F3 or F4 Open or shorted oven temperature sensor Replace oven temperature sensor F5 Hardware and watchdog circuits disagree Replace clock assembly (also called the ERC) F6 Missing AC signal Check for proper voltage F7 Function key shorted or stuck button Replace touch pad or clock assembly (also called the ERC) or attempt to un-stick button F8 Analog/Digital supervisory Replace clock assembly (also called the ERC) F9 Door latch supervisory Check door lock circuit or replace clock assembly (also called the ERC) F0 Function key stuck Replace touch pad or clock assembly (also called the ERC)

Dec 09, 2007 | Jenn-Air JJW8530C Expressions Collection...

Not finding what you are looking for?
Ovens Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...