Question about Aiwa BMZ-K1 CD Shelf System

2 Answers

Aiwa BMZ-K1 My aiwa system is currently not switching on. When i try to power on the system all that happens is the LCD backlight flickers on and a relay inside fires. The system then returns to being off and will not power up again for a few seconds. Is there anything that can be done to try to troubleshoot what is making the system not switch on. I have opened up all of the plastic surround and then opened the metal shielding inside. I can see the relay that is making the sound but apart from that the circuit board is huge so if i could narrow down the problem i would be much more likely to be able to fix it. Regards Ben

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Aiwa BMZ-K1

Tried rewiring the speaker terminals and the system sill shuts off. even does the same thing with no speakers attached to the system. Thanks for the suggestion though.

Posted on Nov 08, 2005

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 277 Answers
Re: Aiwa BMZ-K1

If the unit shut off suddenly or just wont turn on it might be a short circuit in the speaker terminals. Disconnect the AC power cord from the AC outlet and reconnect the speaker cords correctly.

Posted on Nov 08, 2005

Add Your Answer

0 characters

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...
3 Points

Related Questions:

1 Answer

Stand by problem


do have the the circuit book of aiwa nsx k880

Apr 08, 2014 | Aiwa Audio Shelf Systems

1 Answer

My Aiwa CX-NAJ80 system will not come off Standby.


Sorry but the control board is shot that's why there inexpensive to purchase they only last for 3 to 5 years

Mar 02, 2014 | Aiwa Audio Shelf Systems

1 Answer

Aiwa mod. CX-ZR774 System will not power up


I assume that the Aiwa controls the other components, such as a CD changer. If these units are plugged into the rear of the Aiwa, then they may not be receiving power due to an auxiliary switch being off, or a bus breaker being blown. Breakers are on the back panel of the unit. They have a black thumbscrew that turns out counterclockwise. Take the fuse to Radio Shack to confirm if it is good or not, and good a new one if not. If the components are not connected to the Aiwa, then I have the ask the stupid question of are they plugged in, or is the surge protector that they are plugged into plugged in. Remember that even modern surge protectors have breaker switches, and may need resetting, especially after a snow or thunderstorm. Good luck.

Jan 27, 2014 | Aiwa Audio Shelf Systems

1 Answer

The system don't let insert CD and shows "roll error"


imam aiwo bmz k1 in mi ne dela cd predvajalnik. pa me zanima kje bi lahko nabavil novi laser za ta model. v naprej se zahvaljujem.

Mar 01, 2010 | Aiwa BMZ-K1 CD Shelf System

1 Answer

Aiwa z-l700 won't switch on?


1. Verify you really have power at the outlet. If so...
2. You will need to open up the main boby of the device (amp portion).
3. On the circuit board where the power plug comes in, you need to look for a fuse or fuses. Do you know how to check these? This is most likely the problem. Good Luck!

Apr 07, 2009 | Aiwa Z-L700 Shelf System

2 Answers

Aiwa bmz-k1 cd changer wont work


CD Mechanism has more then 100 parts so how many parts you will buy? Complete mechanism is not available.
Look at below image, its 5th page of CD mechanism and 4 pages are more like that.

16f17f8.jpg

Feb 24, 2009 | Aiwa BMZ-K1 CD Shelf System

1 Answer

CD changer wont work


Please see my reply HERE, for your second post.

Feb 24, 2009 | Aiwa BMZ-K1 CD Shelf System

1 Answer

Power Problem.


hi all,
im a electronics engineer(B.E ELECTRONICS),
i was having my own repair shop (just hobby changed to repair shop)
Aiwa bmz series having mechanical problems,
it needs some timing adjustment,
i can tell clearly by seeing & observing it.
if ur luckily staying in bangalore i can get it corrected,
u can contact me 9739317349
plese do not change any setting or gear inside, if u did its very difficult to give life to such music system

Aug 29, 2008 | Aiwa BMZ-K1 CD Shelf System

1 Answer

Roll error message


hi all,
im a electronics engineer(B.E ELECTRONICS),
i was having my own repair shop (just hobby changed to repair shop)
Aiwa bmz series having mechanical problems,
it needs some timing adjustment,
i can tel clearly by seeing it.
if ur luckily staying in bangalore i can get it corrected,
u can contact me 9739317349
plese do not change any setting or gear inside,
if u did its very difficult to give life to such music system

Dec 25, 2007 | Aiwa BMZ-K1 CD Shelf System

1 Answer

Aiwa BMZ-K1


Google the model number of your unit. There should be at least three suppliers for these parts. AIWA is a label brand and I think they are owned by Fujitsu.

Apr 08, 2007 | Aiwa BMZ-K1 CD Shelf System

Not finding what you are looking for?
Aiwa BMZ-K1 CD Shelf System Logo

271 people viewed this question

Ask a Question

Top Aiwa Audio Shelf Systems Experts

 Grubhead
Grubhead

Level 3 Expert

4482 Answers

The Knight
The Knight

Level 3 Expert

65270 Answers

Cindy Wells

Level 3 Expert

4693 Answers

Are you an Aiwa Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...