Question about Sony KP-51WS510 51" Rear Projection HDTV-Ready Television

1 Answer

Color issues there is a problem w/ my Sony wide screen projection TV model: KP-51WS510, it looks like the 3 primary colors are off calibration or somthing it has 1 picture for each of the primary colors slightly off from each other

Posted by on

  • thetoddhudso Sep 12, 2008

    I have the same problem as achillies_08's color problem

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

This is a convergence problem that can be as simple as poor solder connections at the convergence ICs to defective ICs. Can you solder? If so, let me know and I'll provide additional instructions.

Dan

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Sony KP-51WS510 is out of color focus. The blues and yellows are separating. I know there are three color bulbs that work together to create all the colors. Could the bulbs be out of alignment from...


Convergence ICs and CK all Pico Fuses around ICs they will look like resistors but will be Green or Yellow 5amp, 6amp, 7amp Fuses. Big Black ICs they will have the PN# on them
ICs STK392-110 use 120s Mats 1-800-628-1118
TV Repair Shop $255.00

Oct 21, 2010 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Sony KP-51WS510 on shows in black and white.


This DLP tv have a part call a colors wheel.Ur tv have a colors wheel,spinning couple hundred to a thousand RPMs to produre a colors picture.U hear like a loud grinding,squiling loud motor runing?This colors wheel part it dead,must be replaced.Hire a tv Tech for this job,the colors wheel,it very difucult to replaced.U have no machanicals,had never done this before.

Jun 02, 2010 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Our Sony KP-51WS510 TV has a blurry and doubled "neon green" picture. What we can do? Thanks for your help!


These sets have several common problems which are listed below.

Problem #1) Convergence

Yours may have one or more of the following symptoms
  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted or warped
  • No Audio/Video - makes a chirping sound.
Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....
  • Dull looking picture
  • White looking picture
  • Halos around objects
  • Red/Orange looking picture

You can see some more examples and find the fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Apr 03, 2010 | Sony KP-51WS510 51" Rear Projection...

1 Answer

SONY kp-51ws510 rear projection tv. recently it started showing a rainbow on the left top corner and middle bottom of the screen. what might be the problem? can it be fixed? for how much?


This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Screen may look distorted

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 20, 2010 | Sony KP-51WS510 51" Rear Projection...

1 Answer

My tv wont line up crosses and it is the same model kp-51ws510 51in


This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Screen may look distorted

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 06, 2010 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Red shadow on images and letting


Check your convergence, Using your original remote go to the Menu, in the settings select convergence, try to align the colors to each other.

Apr 20, 2009 | Sony KP-51WS510 51" Rear Projection...

1 Answer

I have the same problem. Please advise how to fix it.


my sony kp-51ws510 is out of alignment and the colors are in 3d

Dec 09, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Color problem


Try loading the default settings
Rifaa

Nov 11, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Same problem as achilles_08...different colors on screen


This is a convergence problem that can be as simple as poor solder connections at the convergence ICs or defective ICs. Try esoldering the ICs first. If that fails to resolve it, replace them. These will be large black ICs attached to a heat sink and marked STKxxx.

Dan

Sep 07, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Sony kp-51ws510 51" rear


The picture tubes are on there way out. turning down the screen control inside the tv sometimes gets a little more time out of it

Feb 16, 2008 | Sony KP-51WS510 51" Rear Projection...

Not finding what you are looking for?
Sony KP-51WS510 51" Rear Projection HDTV-Ready Television Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...