Question about Computers & Internet

1 Answer

Troubleshooting my 6T04 Adaptor

I have a Satellite A205-55804 and theres something wrong with 6T04 Network adapter. It was working just fine this morning but now its not. Okay so when i log on to the internet you know the little icon in the system tray thats has 2 computers and has a red X in front of them when you're not connected to the internet, well mine remains like that when connect to the internet(i have a dial-up connection). Now i can log on to the interent and browse and what-not but my icon remains the same and doesn't show the blue icon it usually does when i connect to the interenet. Now I know its up to date cause I already ran a search for updates on it, and I ran a network diagnostics and it says there nothing wrong with my network. Also when i put my mouse on the icon this is what it says "Connection Status Unkown" then under it it says "The dependency service or group failed to start". So I have went to my control panel and went to my device manager and there i saw under my network adapters drop down a whole line of 6T04 adapters with the error icon in front of it you know the yellow caution symbol with the exclamation point and when i double click on it to check the device status this is what it says:
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

and under that :

"Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."

Okay thats it

Posted by on

  • 2 more comments 
  • rutaskadi Sep 06, 2008

    I have the same problem and it started yesterday as well, 05 September 2008. My network icon has a big red x mark on it even if my internet connection is running perfectly fine as I obviously was able to post this message. Same message appeared when cursor is pointed on the icon: Connection status: unknown. The dependency service or group failed to start.

    Specifics: DSL connection, Vista Home Premium, HP Pavilion dv2000.

    Any help will be greatly appreciated. Thanks.


  • suziedower Jan 11, 2009

    there is a yellow thing by the 6to4 adaptor cannot load come up with code number

  • Anonymous Mar 11, 2009

    6T04 Adaptor is not working properly.PRODUCT IS dv6516XT

  • Anonymous Apr 02, 2009

    ******* same problem

×

1 Answer

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It works good on battery but when AC adaptor is plug in the laptop cuts out and restart by itself.


Problem description: The laptop shuts off when AC power adapter is plugged in. The laptop works fine on battery power but as soon as you connect it to AC adapter, the laptop turns off.
Possible cause: 1. Power adapter failure.
2. Motherboard failure.
Possible troubleshooting steps and repair solution: First of all, test the power adapter. Make sure the adapter outputs correct voltage. It's possible that the output voltage is not correct and the laptop shuts down to prevent the damage. Test your laptop with another known good power adapter.
Toshiba Satellite A305 AC Adapter
If the problem still exists, even after replacing the adapter, most likely it's the motherboard failure. Replace the motherboard.

Mar 11, 2011 | Toshiba Satellite A305-S6857, A305-S6858,...

1 Answer

My Lenovo s10 power adaptor (Input 1.7A, Output 20V 2A) was working just now together with the battery. After i didn't used the laptop for an hour and returned to switch it on, the power adaptor isn't...


hi,

You said laptop is working fine if just using the battery,that means that there is nothing wrong with the battery itself. Can yu please try to connect the laptop directly to the power outlet without using the battery just for the mean time,remove the battery and connect the AC adapter directly to the power outlet then power on the laptop,if nothing happens,that means that there is something wrong with the AC adapter itself or the power port on the laptop.
Hope this will help...

Jan 09, 2011 | Lenovo IdealPad S10 Laptop AC Power...

1 Answer

Internet connecting problem


First remove the antivirus suites and firewalls. Open IE Go to Tools -> Internet Options -> Connections -> Lan Setup Check whether "USe proxy server..." check box is checked. If so untick it. Apply and Ok. Then check. If you are bot sure whether you have a proxy or not you can chose "Automatically detect settings". That will override manual configs how ever. Alternatively you can check Connection settings of Firefox since it is working.
Check the device manager for the adapter status. Right click on My computer and go to manage. If it has yellow exclamation marks or red X as you said that means a device failure or driver failure. If so you have to rollback the drivers and if it doesn't work uninstall and re install drivers. Use Add Remove programs if a software is there. If you use a software to configure / access the network appliance (if you have one like a wireless router) un install and re install it.
Check this thread as well.
This 6to4 adapter is a IPv6-to-IPv4 conversion layer. If you are not using IPv6 communications across IPv4 routers, you do not need 6to4 enabled. You can disable it. What is the IP address you are using? Is it ip v 4 or 6? Check using ipconfig using a command window (cmd.exe in run box and hit enter). Not necessary to use IPv6 (only if your college or etc etc use IPv6. Check this thread as well. isatap will not work on Vista but it doesn't do any harm though. :D
Please rate the answer and a testimonial (comment) if the solution helped you to solve the problem.If the problem persists please contact us. Thanks for contacting Fixya

May 28, 2010 | Acer Computers & Internet

1 Answer

6T04 Adapter failure


That 6to4 adapter has been a problem for as long as I have been aware of it but I only have that issue when I use my print server. I don't believe the 6to4 is your actual wireless. Are you using a wireless print server?

Sep 04, 2009 | Packard Bell 1580509280 Network Adapter

1 Answer

Code 31 cannont load driver 6T04 adapter


To resolve this concern, first thing to do is to uninstall the device from device manager and then after that restart the computer and run the setup cd that came with it to reinstall the software and the device back to your computer....

Jul 29, 2009 | Packard Bell 1580509280 Network Adapter

1 Answer

6t04 adapter, yellow triangle and exclamation mark,


Ok, first thing you need to do is, see if you network adapter is enabled ... You can do this in the Device manager. If there even is an adapter ... If there isn't download the drivers for your Ethernet card, put them on a mem stick and just install them on your Vista machine ...

Mar 18, 2009 | Packard Bell 1580509280 Network Adapter

2 Answers

I cant connect just one network


Be sure that your wireless network is working
Check your wireless router settings
Check if you see any other wireless network available on your computer
Test connection, see if you pulled an IP address
Go to the Windows desktop
Select Start then Run
In the text box type: cmd (WIN98/SE type command)
At the command prompt type: ipconfig
4. What does it read as the IP address?
* If it reads 192.168. something dot something then you are pulling
an IP address and are connected to the network. The problem is
software related, check your firewall, and wireless card configuration.
Also check any WPA or WEP encryption keys. Check with the respective
manufactures.
* If it reads 0.0.0.0 for the IP address you are not connected to the network.
* Check your connection configuration and the adaptor.
* Check with the respective manufactures.
STEP TWO/ Basic troubleshooting continued....Testing the adaptor
1. Go to Windows desktop
2. Select Start then Run
3. In the text box type: cmd (WIN98/SE type command)
A DOS window will open.
4. At the prompt type: ping 127.0.0.1 (reserved IP address for all adaptors)
5. Check the line that reads "packets sent = 4, Received = 4, Lost = 0
A. Zero is good, the adaptor is working. Again check the connection
configuration,and the adaptor configuration.
It may be a power issue especially with older or less expensive computers
or wireless cards.
* Check the antenna location, are you inside or outside, look for interference.
* Check with the respective manufactures.
B. If it reads all 4 packets lost, the adaptor is not functioning.
* Check and update the drivers, Contact the respective manufactures.
* If it shows any number of packets lost (you are dropping packets)
it is an adaptor or signal strength issue (generally form the laptop side,
not being able to reach back) especially with older or less expensive
computers or wireless cards.
* Update the drivers
* Check antenna location, or distance from the signal
* Contact the respective manufactures.

Nov 14, 2008 | Gateway (802.11usb) Wireless Adapter

1 Answer

My 6T04 adapter


Well, I think this is a question for Dell Support, this is an IPv6 issue. It's really not hurting anything, and it appears a ton of people are having this problem

Nov 11, 2008 | Toshiba Satellite P100 Notebook

1 Answer

Toshiba Satellite A105-S4064; can't get battery to charge


If you put strain on the jack (e.g. hang power adaptor from it whilst using or charging) then the socket on the mainboard can get hot due to poor contact and melt.

There is no way to fix this except to completely dismantle the laptop and fit a new socket - most likely a repair centre will charge you for a new mainboard.

Try another adaptor to see if that is the problem (broken wire in cord) - otherwise look closely at the socket in the notebook.

Aug 08, 2008 | Toshiba Satellite A105 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...