Question about JVC GR-D20EK Camcorder

2 Answers

E03 Keep on getting E03 - safeguard mode .... anyone ready to help ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Day after thanksgiving, (year 2008) about to film my girls putting the tree and same E03 as all of you with the camera chewing my tapes. All of my DV cassettes are brand JVC so I know that was not the issue. I read and read and finally decided to grab a flashlight and study how the mechanism move. Then I noticed something suspicious about the right "two little spikes" attached to a white plastic piece that, when close, it moves to the right side of the camera head (the round stainless wheel inside). The white plastic piece mentioned above, part of it came off the guiding tiny little rail. 1. So I opened the tape compartment with an EJECT command, 2. Close it back up with an inmediate unplug of the camera without battery so it will stay in a position where I can get my fingers and paper clip inside. 3. With the paper clip, stretch the guiding rail in such a way that it widens so the bottom of the white plastic thingy can get back in the guiding rail. 4. Put a cassette inside and FFWD, PLAY or RWD and problem fixed.

Email me if you have any questions. Happy filming!

Raf

Posted on Nov 28, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

E03 is a mechanism problem.Take it to a JVC agent for repairs.

Posted on Sep 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

JVC mini GR-D23EK Unit in SAFEGUARD mode E03 how to correct it


Hello. What I've found is that in dealing with the error codes your choices are very limited. You can try removing the battery and power supply for a while. This might clear the code, however, failing at that you'll be forced to send in the unit for repair--you are absolutely not alone in getting this type of problem--definitely get a quote first and keep "do I want to replace this unit" in the back of your mind....This is a JVC problem.---Rick

Sep 16, 2009 | JVC GR-D370 Mini DV Digital Camcorder

1 Answer

Keep getting E03 error indication. Ejecting and reinsertion of the tape does not seem to be fixing the problem, also says unit in safeguard mode. What do I do to remedy this?


where your battery goes in,on the side , theres a little hole should say reset,get a niddle and push it and after you reset it ,it should work,make sure its on when you do it .if my info is of any help to you please leave me a comment ,thankyou.

Sep 02, 2009 | JVC Cybercam GR-DVL520 Mini DV Digital...

1 Answer

Gr-dvl-520u trying to record or playback tape it goes into safeguard mode within 5 seconds. alternatly pressing play and still every 3 seconds advanced the playback without it going into safeguard mod


According to http://www.techlore.com/article/10974/JVC-Camcorder-Stuck-in-Safe-Mode/,

"JVC notes that you are also given a malfunction code when the unit is placed into safeguard. If it displays code 01, 02, or 06 you should remove
the battery and powersupply and wait for a while. Code 03 and 04 indicate that you should eject and reinsert the tape.

If neither of these solutions work, your only alternative is to bring it to a shop or send it to JVC for diagnosis or repair. Unfortunately, there is no other way to clear the condition."

If you are getting E03 or E04 errors on every tape you try, it sounds like a servicing is required.

Apr 17, 2009 | JVC Cybercam GR-DV500US Mini DV Digital...

1 Answer

JVC CAMCORDER


E03 is a tape winding error. I had the same problem. Try a new tape. That's all it took for mine.

Feb 24, 2008 | Video Cameras

1 Answer

Error E03 -


I tried Tapping on side of Camcorder and I worked, after 2 or three times while message appeared.

Oct 19, 2007 | JVC GR-DVL100 Mini DV Digital Camcorder

1 Answer

E03 safeguard mode


look for a tiny pinhole and insert a pin while powered up to reset

May 27, 2007 | JVC Cybercam GR-DV800US Mini DV Digital...

9 Answers

Error message: E03 Unit in Safeguard Mode - Remove and reattach battery


HI, ERROR CODE E03 MEANS THE THE TAPE IN YOUR CAMCORDER IS TOO SLACK, ALL YOU NEED TO DO IS EJECT THE TAPE & TIGHTEN IT USING YOUE THUMB LIKE I DID, ONCE I PUT THE TAPE BACK IN THE ERROR HAD GONE ( FOR EVER I HOPE!) GIVE IT A GO ANYWAY, HAYLEY X

Mar 19, 2007 | JVC Cybercam GR-DVM90 Mini DV Digital...

Not finding what you are looking for?
JVC GR-D20EK Camcorder Logo

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

kakima

Level 3 Expert

98829 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...