Question about Creative Labs Digicom DI5655 Modem

1 Answer

No caller ID for Iut of area/Blocked calls!

Hi! My modem refuses to acknowledge the aforementioned items. For regular calls, the caller ID works great. For regular calls, XP's modem log displays RING, DATE, TIME, NMBR and NAME. When those special calls happen, XP's modem log displays RING, DATE, TIME...and just further RINGs. So, as you see, it doesn't "capture" the codes for either Out of area or Blocked calls. I believe it should say NAME=P or NMBR=P or NAME=OUT OF AREA or NMBR=OUT OF AREA, etc. Creative's support couldn't solve it. What about you? I'm ready to manually fix my (latest) driver if that's what it takes.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers
Re: No caller ID for Iut of area/Blocked calls!

This is normal your modem cannot detect the blocked calls or out of area calls.there is nothing you can do about these calls if thghe caller has blocked there number you probably don't want to talk to them any way this means there tring to get you to answer not noing who is on the other end. a tavtic used by bill colectors tellcom sales. and so fourth

Posted on Mar 08, 2008

Add Your Answer

0 characters

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...
3 Points

Related Questions:

1 Answer

I have a Meridian 9316 phone in my office and it continuously rings with no pause how to I stop the ringing besides from turning the volume off


Setting the ring tone and ringer volume You can choose one of the four different ring tones and set the ringer volume. To set the ring tone and volume: 1. Make sure that the ringer is turned ON. 2. Press the Set Options key. 3. Press the down arrow three times or press [3] to go directly to the item. 4. Press [3] and follow the instructions on the display. When picking the ring tone, press the volume bar to adjust the volume. 5. Press [Save] to end when you are satisfied with the ring tone and ringer volume.

Apr 30, 2015 | Nortel Meridian 9316CW - 1 Line...

1 Answer

I am configuring a pri ckt in mitel sx200icp i cannot make outbound calls i have programmed pri card as per carrier in form 42 with NI2 - NI2bell have tried all procol variant incoming is fine


It sounds like the outbound Caller ID is not set up properly in form 22. You will need to insert *6 into the dial string. If this isn't set up, many carriers will reject the call as it doesn't see the correct outbound caller ID.

Sincerely,
Mark

Mar 16, 2011 | Mitel PRI Card T1 E1 (9109615001)

1 Answer

My phone is going is show off as a private number and i cant receive calls


You need to check the settings if you send my caller ID option is disabled.

Nov 09, 2009 | Linksys SPA-2102 NA Analog VoIP Adapter...

2 Answers

The internet red light comes on on the d link modem regularly- sometimes for hours, rebooting does nothing often- it was supplied by aol DSL 2640R- I have had it for about six months and gradually the...


hi der... usually this kinda issue most of the time lies with the service provider.. but also to play safe...if can u may try to get another modem to test the connection. well internet light turns red . possible reason :
DSL keeps disconnecting - Frequent intermittent causes ur user id and password to be erased and therefore u need to reboot or may need to configure back
2nd : u may sometimes face night dc , if tats the case its the ISP circuit problem.. ask them to come and change the circuit which gives u intrnet access.
3rd : ur modem unable to save ur configuration ... therefore ur modem mite be at fault
or u can contact the respective modem vendor to check if ur modem is at fault before calling ur isp .. this mite help u pal...

TC...

Jul 07, 2009 | D-Link Modems

3 Answers

No connectivity; constant blinking LED lights "Receive" and "Send"


Or you didn't pay your subscription on time and the ISP disabled your cable modem to send user traffic over the cable network. When both Send and Receive lights are blinking that is a visual aid that the modem is working fine, but the ISP disabled its access to the network (unpaid bill, legal issues, etc.)

May 17, 2009 | Arris SURFboard SB5101 Cable Modem

1 Answer

H50113 modem takes 1:30 to hang up regardless of message length


Ok, so I tried the modem on a new Dell (C2D laptop), WinXp, USB 2.0, with the XP drivers supplied from the CD, and I still get the same result. Sadly, this is either a defective modem, or yet another driver issue that hasn't been resolved. In any case, I ended up downloading a program called PhoneTray Free which is a Caller ID/Telemarketer Zapper program. This works quite nicely with the FaxTalk software supplied with the Hiro modem. Basically, I can eliminate a number of the 1:30 messages by having the PhoneTray software ZAP the calls on the first ring automatically if they are a blacklisted number. Hopefully, this helps.

Regards

Feb 03, 2009 | Hiro (H50113) Analog Modem

1 Answer

Caller ID with the H50113


That modem has an Agere chipset. I think you should try a more recent driver. I believe the current one is 2.1.84.0 (November 2007). The driver .INF files allow the modem responses to be properly interpreted. If you can't find a recent version on Hiro's site, try another vendor's site. Encore USA also makes modems with the Agere chipset. After installing the driver you will want to add "AT+VCID=1" as an advanced setup string for the modem (via control panel phone & modem options applet).

Nov 26, 2007 | Hiro (H50113) Analog Modem

1 Answer

How to put mi moden to work directly


you need to register the modem MAC id to your ISP and do the regular physical connection (Co-axial cable to the modem ). it will work

Oct 03, 2007 | Arris SB5100 SURFboard DOCSIS 2.0 Cable...

Not finding what you are looking for?
Creative Labs Digicom DI5655 Modem Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Modems Experts

small6363
small6363

Level 3 Expert

18249 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada.
yadayada.

Level 3 Expert

54984 Answers

Are you a Creative Labs Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...