Question about Universal Remote Control 2700A DTV Receiver

1 Answer

Pansat 2700 is the power supply board the same as the 3500 because i cant find those capacitors

Posted by on

  • Anonymous Sep 07, 2008

    I can't turn on the reciever. the on/off switch on the back. I dont know whats wrong. Thank you.

  • Jaime Hernandez May 11, 2010

    The power supplies are some how the same but the location of the capacitors could different.

    What capacitors are you looking for?

    What is the problem with your receiver?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Here is a picture of the Pansat2700 power supply.

pansat 2700 - 4e4cbc4.jpg

Posted on Sep 05, 2008

  • Jaime Hernandez Sep 08, 2008

    Many of these satellite receivers will need to be jtag to restore their functionality but that is a bit difficult to do.

    The first step should be to check the voltages from the power supply to the main board, if the voltages appear normal; then jtag is needed to revive it.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Philips 32" LED TV won't power on after power outage.

Sounds like some components on the power supply board were toast before the power went out. If a capacitor fails while running it will still function. However if you remove all power then try to restart it that failed capacitor will no longer function. has repair kits to fix common problems on these boards. This is the place if you're a do it selfer and need parts.

Jan 11, 2014 | Televison & Video

1 Answer

Power on's for 2mins and gets off


This issue is related to a power problem as long as the TV turns on and off by itself.

The problem is consistent with overheating on the power supply board of the TV. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby making it to misbehave.

The power supply board of the TV has few capacitors and IC. If any of these IC's gets short or become weak, it can cause the TV to turn off on it's own.

When current passes from electric outlet to the power supply board of TV. The current also goes to the weak/faulty part, then the current stops or slow and the board overheats and TV shuts off on it's own.

To solve this issue, check the power supply board and read it with a meter and continuity tester, in order to detect the faulty part and replace the faulty part on the board which is short due to which power supply board

You can buy these capacitors at any Fry's or Radioshack store or you can order them online at vendors like ""(look for electrolytic capacitors). After replacing these capacitor(capacitors) most likely the normal operation will be restored. Or you can by a refurbished complete power board from www/ to save you some stress.

Note: There may be also some other causes for this symptom ,like a defective T con board ,or main board,but the bulged top capacitors are the most common cause for this issue.

If you don't have the ability to read the fault, then you might be needing the help of a repairman or you can call a friend that has the ability to help you out.

I wish you the best of luck.


Sep 28, 2011 | LG Televison & Video

1 Answer

Lost power on the converter box,plug works red or blue light on this zenith converter.

I would check the startup resistors and the electrolitic capacitors on the power supply board it quite common for them to loose capacitance and cause the power supply not to start,it can be proved some times by warming the psu board with a hairdryer then turning on. i hope this helps?

Apr 28, 2010 | Televison & Video

1 Answer

Need to replace capacitors to bring back to life, which ones?

If this was due to a power surge after a storm or power failure, I would start looking at the capacitors in the power supply. This is the first circuit in series with the power chord. Check for loose capacitors or leaking ones. It depends on the brand that you have, the ratings of the capacitors would vary and colors would also vary. If there are none in the power supply you may have to check all of them on the board for leaks or loose solders.

Aug 24, 2009 | RCA Televison & Video

3 Answers

Plasma philips model 42pf5520d/10 working few seconds and go for stand by led


I have seen this once before and the reason was a capacitor on power supply board.

My bet would be Power Supply board, before we troubleshoot anything else. Check the continuity of the board. There might be many capacitors or diodes. Check the voltage across them. Sometimes, you can find a faulty capacitor by naked eye. Usually, the defective one are swelled.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Aug 03, 2009 | Philips Televison & Video

2 Answers

Pansat 2700a remote control codes

try code 0156. If that doesn't work, try searching for the code using the remote. Direcections should be in the manual for the remote.

Feb 15, 2009 | Universal Remote Control 2700A DTV...

2 Answers

Pansat 2500a Dish Network Key

hola me puedes mandar las key de la pansat 2500

Feb 14, 2009 | Panasonic Televison & Video

1 Answer

I need the set up instruction and codes for my pansat remote

001, 006, 021, 050, 089, 101, 105, 127, 133, 160. You can probably download your manual from PANSAT's website under Technical Support.

Nov 28, 2008 | Universal Remote Control 2700A DTV...

3 Answers

Please get me started with Fortec Star Lifetime ULTRA

There are plenty of information on how to do this conversion.
Google it or you can go to for more info on how is done.
Good Luck.

Feb 15, 2008 | Fortec Star Lifetime ULTRA

Not finding what you are looking for?
Universal Remote Control 2700A DTV Receiver Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Universal Remote Control Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4798 Answers

Are you an Universal Remote Control Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides