Have Heidelberg Linoscan 1400 with scsi connection and will connectto IMac G4 with usb. Is there any convertor or connector?Can the scsi-card changed to usb-card in the scanner.I have a scsi-card in the other G4 but it did not firstname.lastname@example.org
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you are having trouble with your drivers here is a general look at the drivers and how to update them if your computer came with a motherboard disc the drivers could be on it click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x right click to reinstall drivers or if you can see your usb but its not working ports(com&lpt)right click update driver hope this helps
Setup is easy just plug in the cable in to the scanner and the other end of the cable plugs in to the back of the computer and make sure your computer is off. After you plugged them both in, plug in your power supply for your scanner then turn on your computer and it should do the rest.