Question about Televison & Video

1 Answer

Rca tv wont come on

Hello. I read one of your comments on the Rca tv's. Well i am having the same type of issue. It is a Rca Scenium 52" tv. We have only had it for about 4 years. It has worked fine all this time, till about 3 weeks ago. Now when you try to turn it on, all you get is the green light on, then off, then on again, then off, then on again, then off for the final time and you have to wait at least 30 seconds before it will even try again. It has taken me up to 4 hours to get it on with continuous fighting. I tried unplugging it over night, still did it. Could it be a fuse? But with the light coming on and after a while the whole tv comes on, would that be all that is? Please give me and idea on what it could be. This tv cost us 2500.00 and i dont have another possibly 500.00 to fix it. Thank you.

Posted by on

  • cyma80 Sep 18, 2008

    That was what i was afraid of and i knew that would be the only solution but i had to try. Thank you.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

There is no easy solution for this problem. You are going to need a repairman. Sorry.

Posted on Sep 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I won a rca scenium 52 inch hd tv.. i hit somthing on my remote and now i have a fuzzy scree. and dont know how to fix it.. i trouble shooted with dish network. they say it is my tv. but the dvd player is...


Hello. I do hope that you have gotten this resolved. But if not, here are some simple steps.

If you are at TV1, where the receiver box is located, the tv needs to be on channel 3 or 4. Depending on the cable that is running between the receiver and the tv, the tv may need to be on an input, such as video 1 or 2. If you are at the TV2 location, where there is no receiver, then the tv needs to be on channel 60 or 73.

If you are using an HDMI cable- the TV needs to be on an HDMI input
If you are using component cables-the TV needs to be on a component input usually
If you are using RCA cables-the TV usually needs to be on a VIDEO like Video 1 or2
If you are using coax cable-the TV needs to be just on channel 3 or 4.


Becki Barned
DISH Network Customer Service

Feb 12, 2011 | RCA Scenium M50WH187 50" HDTV

1 Answer

RCA Scenium 52 DLP


you should take it to a tv repair shop to look it over, they charge $50 and they will tell you want the problem is.

Dec 17, 2007 | RCA Scenium D40W20 40" Rear Projection...

2 Answers

I have a RCA Scenium D52W135D, that wont come on. every great once in a while it will. When you plug it in it starts to warm up then shuts back down. Keeps repeating. It flashes a code at you through the...


have scenium d52w135d combo burnt power resistor in deflection board,do i need to replace the the whole board? or just the resistor,and where can i find this resistor?

Nov 03, 2009 | RCA D52W135D 52 in. TV/DVD Combo

1 Answer

TV makes very loud noise


Ur high voltage transformer is dead,the FBT,the big block of plastic have red wire go to the video board.Also might have burns capacitors in the DM power suply board or deflection board it puffed up.

Sep 28, 2009 | RCA HD52W58 52" TV

1 Answer

52 inch rca scenium wont turn on


this is an indication of a shorted horizontal ouptut transitor and bad flyback transformer

Mar 14, 2009 | RCA HD52W58 52" TV

1 Answer

RCA Scenium


What does the picture look like when it is on?

Dec 03, 2008 | RCA Scenium D40W20 40" Rear Projection...

1 Answer

RCA D52W17 ANTENNA/CABLE ANALOG INPUT


are you looking for this part?
http://www.partstore.com/Part/Thomson/RCA/264658/New.aspx?ModelMfgName=Thomson&ModelBrandName=RCA&ModelNumber=D52W17BYX1
if so, just make sure your model number is on the listed devices.

Nov 11, 2008 | RCA D52W23 52" HDTV CRT TV

1 Answer

Sound off my tv


Hello tennie,

Check your audio out configurations on your TV menu, this includes mute and volume control. After checking them, then try to see if any audio is coming out of the other audio outputs. If there is, then you may have damaged speakers. If there is no audio on any of the outputs you may have a damaged audio output processor or a poor connection in the audio section. If this is an audio circuitry issue; I would suggest that you take the unit to a TV repair shop for an estimate, and let them repair it.

I hope this helps,
Thank you,
Shuttle83

Feb 19, 2008 | RCA D52W136D 52 in. TV/DVD Combo

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...