Question about Samsung Tocco F480 - Pay Monthly Cellular Phone
If you are not getting signal in some areas then your cellphone will display as "limited service" and sometimes when you come to the area where there is signal then also it display "limited service"..
if so try giving "restore factory settings"("reset") the firmware might have got corrupted .. by giving the "restore factory settings"("reset") the firmware problems will be fixed ..
after you press "restore factory settings"("reset") it may ask for the "security code"("password") give that ...
after you perform the reset restart your phone once ...
if you still persist the same problem then the network antenna(network pin) inside the phone is in loose contact it might not be touching the motherboard of the cell correctly so if you are good at opening then just open the handset and fix it correctly you problem will be fixed ...
any doubts you can reply me
rate my solution
have a nice day
Posted on Sep 05, 2008
I dont think its down to your signal as your getting on the internet. it could be a firmware problem if i was you i would flash it ive flashed mine 4 or 5 times with no problem and its always been an improvement on the previous f/w . I find the best f/w to be F48FXEIA3 you can find out what f/w you have by dialing *#1234# its the last 3 letters and numbers that are important IA3 i=2009 h =2008 a = jan b=feb c=march and so on the number after is the revision of the said month any probs e-mail me
Posted on Apr 17, 2009
Tips for a great answer:
May 17, 2011 | Samsung J700 Cellular Phone
Feb 26, 2010 | Samsung SGH-G600 Cellular Phone
Oct 12, 2009 | Cell Phones
Jul 02, 2009 | Samsung SGH-G600 Cellular Phone
Aug 09, 2008 | Cell Phones
Mar 14, 2008 | Samsung SGH-D900 Cellular Phone
971 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: