Question about RCA RP5610 Clock Radio

2 Answers

Turning off "NAP" feature

I can't turn off the "NAP" feature on my RP5610.... I always end up randomly pressing buttons for 10 minutes to get it to shut off.... Fully aggrevating me.... I never intend to set "NAP" but if you hit snooze the "NAP" button is close enough to be bumped when you are still half asleep...

There is no manual available for download or I would have just looked it up myself.... My manual of course found it's way to the trash during Spring cleaning....

Please help?

Thanks so so much
Angel Klodt

Posted by on

  • 2 more comments 
  • Anonymous Sep 30, 2008

    I have the same problem...but my "Nap" feature turns on when ever I have to set the alarm clock. I do not want it to but it just turns on. You are supposed to hold down on the "Nap" button until it turns off but this only works about half the time.

  • flyballpups Dec 06, 2008

    I can't turn off my Nap feature either, even by following the instructions in the manual.

    I'm also having the same problem as the second poster now, where when I press the button to set the alarm time, it turns on the Nap... and I can't turn it off!

    My workaround is to set the Nap to 10 minutes and then hit the Off button when the alarm sounds. REALLY frustrating!


  • Anonymous Mar 22, 2009

    Same thing here, when I go to set or check my alarm, half the time the "nap" will come on, and I have to hit it about a dozen times before it shuts off. This thing is a peice of garbage.

  • Anonymous Apr 20, 2009

    Yep, same problem here. My model number is RP4803B, but looks the exact same and **** just as bad. Go to set the alarm time without even pushing the nap button the stupid thing turns it on and you stuck waiting 10 mins to turn it off. Looking that people are having the same problem a hammer will solve my problem. Going back to simple standard alarm clock with no CD or dual alarms. They never break or mess up. Thumbs down to RCA for not having a solution and not having an on-line manual.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You have to "double-click" the "NAP" button. And on the second "click," hold it down until the "NAP" light goes off.
That worked for me three times in a row, at least.

Posted on Sep 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My daughter has the rp4803 and to turn off the nap just continuously hold down the left side of the left button where it says "nap" until the illuminated nap disappears.

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am not sure how to set the time interval in the nap mode. It starts at 2 hours, and I can't change it.


Ok, this is the way it works, and I keep my clock radio for this feature alone. It is a 2 hour "count down" timer. It is set in 15 minute intervals. Supposed you wanted to take a 1/2 hour nap. Press the button but don't let go. As you hold your finger down the timer will start at 2 hours (2.0) and it will then go to 1.45, etc. When you get to a 1/2 hour let go and it will start counting down. If, in the process, you make a mistake, press the blue button and don't let go. Hold it down until it erases the setting and removes the NAP text from the front display. Release button. Start holding down the button again. Once again, the display will go to two hours, continue to press button, it will start counting back in 15 minute increments. Again, when it gets to 1/2 hour, quickly let the button go. As the clock counts down, you cannot see how much time is left on the clock. Press the button, quickly let go again. It will display how much of the 1/2 is left. When the clock counts down to zero, either the alarm will sound or the radio will start playing depending on what you set the alarm to do. Press the off button, that's it... (0:

Sep 01, 2011 | RCA RP3721 Clock Radio

1 Answer

I am using my mother's Elgin 3400E travel alarm


On my Elgin alarm clock, you just push the nap button and it will add 15 minute increments for a nap. I haven't figured out how to turn it off if I change my mind or wake up earlier than I set it.

Jul 21, 2011 | Elgin Travel Alarm Clock

2 Answers

Good Morning. I was given this alarm clock which is driving me crazy cause i cant figure out what to do. I tried researching the internet for a manual, but failed. It is a RCA CD Clock dual wake Radio....


Following are the instructions for the RP5610 which looks very similar to the 4801A (that I also have). The only difference in the instructions is that the 4801A doesn't have a clock icon, just press the SET button until the center colon dots are flashing, Press the rewind or fast forward arrows on the circle next to it to set the time. Set the alarms by pressing the set button until bell 1 or 2 is displayed. Nap is also set with the set button - not sure how to stop it yet.

To set the clock:
  1. Press the SET button until the clock icon is displayed (circle with hands at 10 and 2)
  2. Press |<< REV or >>| FWD to set the time.
  3. AM or PM icon will show besides the time.

Dec 24, 2008 | RCA Radio Alarm Clock

1 Answer

Manual RCA RP3710A


For the snooze, hold down the snooze button (should display the length of time for snoozing) and hit the time/tune buttons up or down to increase or decrease the snooze time.

For the nap time, press nap and the nap indicator should start blinking. Again, hit the time/tune buttons up or down to increase or decrease the name time in 10 minute increments up to 2 hours.

Oct 21, 2008 | RCA RP-3765 Clock Radio

2 Answers

Nap Feature


i press the nap button and hold down the cancel button and it works fine

Sep 20, 2008 | RCA Radio Alarm Clock

1 Answer

Set the clock on my RP4801A clock/radio


Following are the instructions for the RP5610 which looks very similar to the 4801A (that I also have). The only difference in the instructions is that the 4801A doesn't have a clock icon, just press the SET button until the center colon dots are flashing, Press the rewind or fast forward arrows on the circle next to it to set the time. Set the alarms by pressing the set button until bell 1 or 2 is displayed. Nap is also set with the set button - not sure how to stop it yet.

To set the clock:
  1. Press the SET button until the clock icon is displayed (circle with hands at 10 and 2)
  2. Press |<< REV or >>| FWD to set the time.
  3. AM or PM icon will show besides the time.

Jul 02, 2008 | RCA Clock Radios

6 Answers

NAP


JUST HOLD THE NAP BUTTON UNTIL IT NO LONGER IS BLINKING NAP, dont return it, its very good at waking you up in the morning, and is basically a good alarm clock, it just has a different way of turning nap off.

Feb 25, 2008 | GE 74801 DUAL ALARM CLOCK RADIO .9" LCD

6 Answers

Resetting clock


Press the SET button until you cycle through the alarms and the Colons on the time start to flash. use the right and left arrows from the CD buttons to adjust time; After time is set; press the SET button. Be careful to not fat finger and hit the CD button when pressing the SET buttons. That will turn on the AWFUL NAP timer. That's another headache.

. Stop the Nap alarm Press NAP to start NAP flashing. Press and hold NAP to cancel the nap setting. If this does not work; try again. It seems to take me a time or 2 to get it to work.

Feb 04, 2008 | GE 74801 Clock Radio

2 Answers

Snooze alarm


Like everyone else here I have accidentally hit the NAP button and couldn't turn it off. This morning at 2am I accidentally hit it with my husband in bed. I decided one and for all to guide this out. By flashlight and my cell phone i Googled a solution. I came across many, none of which worked. I resorted to trying methods that were posted for other models of this brand of clocks. The solution that I found that worked was to hold down the back part of the NAP button until the seat the time displayed and the nap light off. By back part of the button I mean hold down the tiny section closest to the rear of the clock. I got this solution from instructions for model RP3721A clock. It took me 17 minutes.That's just 3 minutes before the alarm would have gone off.

Nov 01, 2007 | RCA RP5440 Clock Radio

4 Answers

Changing time on RCA CD clock radio


UNPLUG!!! Wait 15 seconds. Plug in again, CLOCK will flash 12am.
Press "set" button ONCE.
Press Double Back Arrows |<< to go backward from Midnight
or
Press Double Forward Arrows |>> to go forward from Midnight

(Either press-hold the Double Arrows for quick minute-scroll or repeat-press Double Arrow for a slower minute-by-minute change.)

Sep 20, 2007 | RCA Radio Alarm Clock

Not finding what you are looking for?
RCA RP5610 Clock Radio Logo

Related Topics:

1,587 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Clock Radios Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Are you a RCA Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...