- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You don't have to buy expensive cables to run wire for those surround sound ...Interconnect cables are important-in that your system won't work without them. .... If you use a rack or shelves for your AV gear, remember to put the amplifier or ... the projector remote; Power up the home theater system with the receiver remote ...
? 1:31 https://www.youtube.com/watch?v=oG17QKiI_E8
Feb 28, 2014 - Uploaded by dallas1999fan
Step 1 take apart Step 2 spin the fan Step 3 unplug the powercable Step ... his fault that your system is not fixed. i have the same stereo system and it .... Sony MHC-EC909iP Shelf SystemFeatures & Review - Duration: ... Red Blinking Power Indicator Denon Receiver AVR-488 - shuts off - won't stay on etc.
If it has a bi-amp, you can connect the speakers to it. By the amplifier, if it's a stereo with bi-amp, be sure that it has at least 400 watts and up in order for the speakers to turn out great, if a receiver like a integrated amplifier, it may have like 2-10 connections, you can connect the speakers all together if it has more than 3 connections, if below 3, you may need to take the speakers apart and make it 3 way by connecting one wire to the tweeter, another wire from the tweeter to the main or mid speaker then one more wire from the main or mid speaker to the sub.
PARTS ARE AVAILABLE..AND YES IT IS WORTH REPAIRING.. CPC PRESTON ..CHARLES HYDE & SONS LTD
YOU CAN ORDER MAIL ORDER .JUST LOOK UP ON NET , BOTH HAVE WEB SITES....AND I ALWAYS HAVE LOTS OF DENON PARTS IN STOCK...rEGARDS email@example.com
You didn't mention why it was disconnected and this may have only showed a failure that was going to happen anyway.
There may be an internal fuse that was just tired but it will require some disassembly if there is no back-panel fuse holder evident.
Most all consumer electronics use a more efficient type of power supply called 'switched mode' (SMPS) and they are fussy by nature.
In your case, the supply was probably close to failure and it was only working because it was plugged into AC but now unable to restart.
You might be able to jog it into working again by repeatedly plugging and unplugging the AC and watching for any signs of life.
If an LED somewhere on the front panel turns on, leave it plugged in then.
This may not work but won't hurt anything either.
If you listen to cd's and the sound dos'ent cut out then it cant be the amp. It could be the audio cables are intermittant between the amp and the dvd playerr or they are loose or corroded a little. or ppossible the input your using is going bad on the stereo sytem but I wouldnt think that the whole system was blown if the radio and the cd plays normal.. check out the causes I listed and let us know if you need more assistance\..:)