Question about E-Machines Athlon XP 2200+ (rb-t2200-c67)

1 Answer

EMachines T3256 Desktop

I got a problem with the leds from the front panel. I disconnect them to clean the main board and now I don't remember the right order to reconnect it. I just can see the light of the power button and all the fans running but the computer doesn't start. I see the pins but I don't know nothing about the polarity (Positive or Negative)
I got the POWER SW (White and Black) The HDD LED (White and Red)  The POWER LED (White and Green)
Please help me!

Posted by on

  • mate003 May 11, 2009

    I Have an Emachines computer W3107 the motherboard gave out the bought anothe motherboard but the new one is more different than the old one,the new motherboard is a KBNF4G SATA II< the wires do not seem to fit the new motherboard.....?????

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 236 Answers

Hi,

Generaly, the little connectors on the printed side will face the bottom of the case. Also, typically, Black is negative, and white/colour is positive (except on the power sw, it doesn't matter). On the motherboard, where the connectors go, there should be some kind of print saying where to plug them in. (IE, POWER SW, would go into PWR, and HDD LED would go into HDLED and POWER LED would go into PWRLED).

eMachines T3256 Desktop - b0dcbba.jpg
It may look different than this, but generally the same kind of layout, as you can see, it shows the positions, as well as positive and negative.

The fact that the fans are running indicates that your power Sw is connected properly.. Make sure that you didn't accidently pull out/loosen anothe connection to the motherboard/harddrive.

Posted on Sep 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My laptop will turn on but the screen wont lite up


The display fiber is lose or the leds brew, or a failed motherboard.

Oct 05, 2014 | eMachines E Machines E627 Laptop Computers

1 Answer

Flashing light on front panel will not boot


Unplug the unit from the power at the wall socket. Wait one minute, Reconnect. Retry. Beyond that you'll have to check the hardware: memory, motherboard, internal power supply control, CPU, oh, and the microswitch behind the On button

Jan 16, 2014 | eMachines eMachine EL1333G-03W Refurbished...

1 Answer

Hi i just bought a m\b MCP61PM-AM,did not come


FIXYA has several "solutions" for your motherboard, at: http://www.fixya.com/tags/mcp61pm_am

Take a close look at the motherboard; each pair of pins at the "far-end" (furthest away from the keyboard/mouse connectors) should be labelled, e.g., 'PWR/power', 'HD LED', 'Power LED', 'RST/reset'.

Apr 24, 2010 | AMD Athlon X2 Dual-core 5200B 2.70GHz...

1 Answer

I had cleaned my precision 530 workstation. After cleaning, the compuate doesnot load the BIOS. Even the fans are not getting switched on. But the light on the motherboard glows In the front panle the LED...


please make certain your memory chips are seated into the mainboard. Also, make sure that your mainboards power cable, and your CPU's power cable (the small yellow and black one) are secured to the board. If your components are secured to the board correctly, you may have an issue with the board, CPU, or power supply. If your pc is under warranty, I suggest you contact Dell for troubleshooting.

Oct 26, 2009 | Dell Precision 530 XEON Workstation Dual...

2 Answers

Need front panel pin connection for HD led ,power led and switches for AMD Duron mother board


Hello there
here is a pdf downloadable flile that will help you.
best regards michael

  1. [PDF] A7V133-VM 3051k - Adobe PDF - View as html Supports Socket A-based AMD. Athlon™/Duron™ processors. North Bridge ... p.37 System Power LED Lead (3 pin) 22) RESET (PANEL) p.37 Reset Switch Lead (2 pin) ...dlsvr03.asus.com/pub/ASUS/mb/socka/km133a/a7v133-vm/e698_A7V133-VM.pdf

Sep 13, 2009 | AMD DURON,1.2GHZ,1200MHZ, FSB200Mhz ( OEM...

1 Answer

I'm unable to get the start menu to come up on my Emachine?


if you do not see the welcome window of the bios, check if you have power, if power LED lights? if so, disconnect the power cord, and open the case, carefully disassemble the memory card ram, and blow the socket, 90% of cases like yours is dirty or bad connection in the RAM, you can also reset the bios, the easiest way is by disconnecting the battery 3v, for a few seconds, must return to the factory settings, it helps if you have any problem with video, I hope it may have helped

Aug 23, 2009 | Acer Computers & Internet

2 Answers

Need to replace M/O for eMachine T2080


go to the web address line and type in fine that type of mother board it will come up

Dec 13, 2008 | E-Machines eMachines Refurbished EMA / AMD...

1 Answer

Dead emachine t3256 cannot access bios either


is f1 the key it asks for to enter bios.... try other keys f2 or even the del key.

Robert

Sep 21, 2008 | E-Machines Athlon XP 2200+ (rb-t2200-c67)

1 Answer

Power plug on laptop not working


Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system1.gif.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery by following these steps:
a. Turn the computer upside down with the front panel
toward you.
Close the computer.
3. Turn the computer upside down with the front panel
toward you.
4. Remove the three Phillips PM2.5×5.0 screws that secure
the switch cover to the computer.
5. Turn the computer display-side up with the front toward you.
6. Open the computer as far as possible.
7. Lift the rear edge of the switch cover and swing it forward
until it rests on the keyboard.
8. Release the zero insertion force (ZIF) connector 1 to which
the LED board cable is connected and disconnect the cable 2
from the LED board.
9. Remove the switch cover.
Remove the Keyboard:
Remove the four Phillips PM2.5×7.0 screws that secure the keyboard to the computer.
Turn the computer display-side up with the front panel
toward you.
5. Open the computer as far as possible.
6. Lift the rear edge of the keyboard 1 until it rests at an angle.
7. Slide the keyboard 2 back to disengage the tabs on the front
edge of the keyboard from the top cover.
8. Swing the keyboard 3 forward until it rests on the palm rest.
Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board.
10. Remove the keyboard.

Remove the Speaker Assembly:
Disconnect the speaker assembly cable 1 from the power button board.
5. Remove the two Phillips PM2.5×4.0 screws 2 that secure the speaker assembly to the computer.
6. Remove the speaker assembly 3.

Reverse directions to replace everything.

Feb 05, 2008 | AMD BALANCE A535 NOTEBOOK MOTHERBOARD WITH...

Not finding what you are looking for?
E-Machines Athlon XP 2200+ (rb-t2200-c67) Logo

4,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...