Question about Nintendo Wii Fit for Wii

4 Answers

Wii fit does not recognize movement on board. This is a new problem. I've used the board and know how to move on it. Tried new batteries, recharged battery charger, re-synched, help!!!!!!

Posted by on

  • 10 more comments 
  • Anonymous Sep 23, 2008

    I have same problem having been using wii fit for month but now it keeps freezing and doesn't acknowledge movement on board. Batteries recharged etc and have tried re-booting, switched off all power it can back on and worked for body test then stopped again when training

  • Anonymous Sep 26, 2008

    I have the same problem, I've been doing the aerobics for over a month now, every day at least 5-6 times and it is suddenly not detecting my movements and "missing" steps. I've spoken with Nintendo 4-5 times, changed batteries, changed position of board, moved sensor... all to no avail. Any fixes out there?

  • freescards Oct 13, 2008

    My Wii Fit has was working and now doesn't recognize my right foot. I've also had problems where it doesn't record steps. Now it doesn't recognize me for a weight check. I've done the same things as the others, batteries, re-sync, etc. What do I do now?

  • forjes Oct 28, 2008

    I have had my wii since Sept 2008, and it is getting progressively worse in regards to recognizing my steps. It does it for both feet. I have really noticed it when I to the aerobic step. I have tried new batteries, rebooting, changing the placement of where it sits in regards to the tv, moved the sensor. What more can I try?

  • slfandkids Nov 03, 2008

    my wii fit wont recognize my movement or when weighing it says not able to weigh to much movement or not flat surface what to do?

  • msterrilynn Dec 11, 2008

    I've had my board for approximately 2 weeks and it fails to recognize movements from the left side on some of the steps and also on the hula. Seemed to work fine at first. The step part it starts missing on is the side movements - when we go purple. However, it is just the left side.

  • diannhome Dec 14, 2008

    My WII fit is having the same problem being described. Center of balance is way to the right. Weight is inaccurate. Hula hoop has trouble with left side and doesn't recognize doing steps. Goes into analyzing and can't recognize and you have to continually try the reset. At this point it's pretty much useless. If anyone knows a solution, I'd appreciate it.

  • gobrigavitch Jan 02, 2009

    My board is doing exactly the same thing. Keeps saying I'm fidgeting and has my center way off to the right upper side. I'm going to try the setup page I read about on here and hopefully I can get somewhere.

  • debro Jan 14, 2009

    My weight was very accurate and then all the sudden one day it says I lost 25 lbs, I know that is impossible and not right. I have tried unplugging, turning on and off, changing batteries, position of where I place the board, nothing working. I have had others in my family try weighing themselves also and it is not weighing correctly. Also the center is pointing to the right and won't go in center, says my balance is way off. Any help would be appreciated

  • jim burdock Jan 19, 2009

    wii fit doesnt register all the steps

  • Anonymous Jan 20, 2009

    Have had wii fit for 4 months & now is not recognising movement on left side of board. Annoying....

  • frankandcath Feb 15, 2009

    I have had the fit exactly 1 week and the upper left sensor is not working. Luckily, I bought it from best buy and paid the 14 dollar insurance, and can exchange it....

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I called Nintendo and they said there are sensor problems with some of the boards. We had to send ours back, free of charge (they even paid for shipping) and had a new one within 12 days. 1-800-255-3700 is the repair and troubleshoot #....

Posted on Jan 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I figured out why both my remotes and Wii Fit Board started having a delay/echo. It was my new TV! I have a brand new flat screen. So if you think this might be your problem as well, find the original remote for your TV (not the cable remote) and look for a button that says GAME or something similar. Press for GAME MODE ON and try your games again.
I was having problems with so many games like Rhythm Parade and Aerobics that needed exact mirrored movements and everything was off. Fixed! I called the Nintendo Customer Service line and they gave me this info 1-800-255-3700

-Christina

Posted on May 10, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have same trouble when doing steps it does not record all the steps .when on ula hoop it has trouble with left side .and weight is nor accurate now
any help would be great

Posted on Oct 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I also have a problem with one of the games. the ski jump. i have played it for 7 weeks fine so know what i am doing, now when i go to jump, it wont and just says something like i didnt lift my knees in time. i did.i have reset the whole thing on the advice of the helpline which was annoying because i lost all the games i had earned but it still didnt make the ski man jump. any help please jane

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wii fit board has a delayed response


check where your motion bar is located and notice your motions in respect to it. If you are too close your motions will be rash, and thus out of sync.... Try backing up your wii fit board and your stance when playing games. This also gives a delayed response... Make sure you are 6-10 feet away from the motion sensor bar...

May 09, 2012 | Nintendo Wii Fit for Wii

1 Answer

Wii recognizes balance board but when you try to play game says stepof board and press a and then not recognized properly


Hi there.

You may want to reseat the sensors. I have written a great tip with video about this.

Let me know what happens.

Thank you for using Fixya!

Feb 21, 2011 | Nintendo Wii Fit for Wii

1 Answer

We have an intec action board for our wii but don't know how to sync it with our wii because we don't have the directions


Okay, so I played 1 wii game and calibrated the board. Each wii board type of game has a profile creation wizard (mine is wii fit), which guides you through calibrating your movements on the board. Once you have a profile, the board understands the movements as directions or coordinates.

Then you can load your profile when you play the game, not the calibration wizard.

Jan 07, 2011 | Intec Wii Action Board for Nintendo Wii

1 Answer

My Wii Fit hasn't been synced yet, because when I insert a disc into the console, the Wii does not respond. It doesn't recognize the movement of the Wii remote on the screen. What is the issue here and...


do you have the Sensor bar hook at the back. Insert the sensor bar plug into sensor bar connector on the back of the consol.placed the sensor bar above or brlow the t.v screen. SEE if that work and let me know

Jan 01, 2011 | Nintendo Wii Fit for Wii

1 Answer

We fit is reading our movements backwards. For


Ok, here's what I did to solve the problem. When I used a game/exercise that was backward (meaning you had to lean to the right to get the Mii to move left)...I would simply turn the balance board around backward and "wala" it worked!! But of course, you have to remember to turn the board back around when using other games/exercises that didn't have this problem. It was so much better than trying to do everything backward!! Hope this helps!

Dec 25, 2009 | Nintendo Wii Fit for Wii

1 Answer

Wii Fit board not staying on


Best suggestion is to make sure the game is fully loaded before pressing the power button.

If it's not working, make sure you press the red sync button on the Wii Fit Balance Board AND the Wii Console.

I know you tried new batteries, but make sure they are really NEW batteries (My experience is that the alkalines work best).

If it still doesn't work, then you may need to contact Nintendo direct.

Good luck!

Apr 08, 2009 | Nintendo Wii Fit for Wii

1 Answer

I need some one who knows how to repair a WII FIT?


Try new batteries and pushing and holding the sync. button on the wii and the balance board, (that is if you are reffering to the balance board).

Mar 31, 2009 | Nintendo Wii Fit for Wii

1 Answer

Wii Balance Board thinks I'm on it all the time!


Make sure of a couple of things and try again -

If you are on semi-shag carpet, try using the little foot extenders. They may not seem like much but they can help.

If you are on moderate to thick carpet, you may need a board to set the Wii Fit Balance Board on.

If you are on a wood floor, you can (but don't have to) remove the little foot extenders.

Another little gremlin can be in those silicone covers. If you have one, I'll bet that's the culprit. As nice as they are to keep the board clean, they can actually attach to the non-moving part of the scale (the bottom) to the moving (surface) part. Be sure that your silicone cover is not interfering with the normal movement of the board.

Finally, be sure that you are always using YOUR setting while exercising or it will not be calibrated correctly. Also be sure that when you start, you are not on the board when it calibrates for the first time after turning it on. If the weight on the board differs by about 5 lbs or more than what it thinks you weigh, it will pitch a little wii fit.

I hope you find this advise helpful. If not, though, please don't label this advise as "inappropriate". A "Thanks for Trying" would be just fine.

Thanks for using Fixya.

Mar 23, 2009 | Nintendo Wii Fit for Wii

1 Answer

Wii balance board weight differently after put on a wii board sk


Sometimes the silicone skin can have an effect on the Wii Fit Balance Board if it gets pinched. Make sure that it is not interfering with the the total movement of the top portion of the Wii Fit balance board and the space between the top and the middle of the unit. If there is any obstruction, refit the skin on the balance board.

Feb 26, 2009 | Nintendo Wii Fit for Wii

2 Answers

WII FIT Board only recognizes movement on one side


Try doing the balance board test to make sure all the sensors are working probably. Click on "User Settings" (the wrench) on the wii fit plaza page. From there your should click on the "wii balance board check." It will walk you through the process and check your sensors to make sure they are working.

Dec 25, 2008 | Nintendo Wii Fit for Wii

Not finding what you are looking for?
Nintendo Wii Fit for Wii Logo

913 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Accessories Experts

pwetherhill

Level 2 Expert

44 Answers

yadayada
yadayada

Level 3 Expert

60775 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

Are you a Nintendo Video Game Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...