Question about Calculators

Open Question

Royal 487nx cash register error

The register beeps and blinks an "E" when turned on. Can't get rid of it unless the key is on "Z". The beeps stops until you press a button then it is back. Please help!!

Posted by on

6 Suggested Answers

  • 106 Answers

SOURCE: Royal Cash Register 130 cx Does Not Print Correctly

maybe uou have a some paper in the tray path,tru to clean it

Posted on Feb 01, 2008

IB4G2008
  • 3587 Answers

SOURCE: Royal Cash Register 120 CX

we'll find that for you..in meantime, try not to run any transaction, eh?

Posted on Mar 19, 2008

  • 1 Answer

SOURCE: I need to change the tax amount on my cash register royal 425cx

I found the user manual online and followed the instructions.
thanks.

Posted on May 20, 2008

  • 1 Answer

SOURCE: ROYAL ALPHA 587 CASH REGISTER

Try this, for example june 30 2004 =
Put the mode key in PRG position In round number keys press 063002 then press #/ST/NS key
If that works to set the time in round number keys press 1100 then press Qty/Date or 1305 for one 05 pm. I have a 587 cx and can't fiqure out how to print my reports X Z

Posted on Mar 04, 2009

  • 1 Answer

SOURCE: my 480 NT Royal Cash Managment System shows "EE" on the screen and beeps not stop

turn the machine to PRG - unplug for 20 seconds. while pressing clr plug back in

Posted on May 26, 2009

  • 1 Answer

SOURCE: need to program a Royal er 125 cash register

I have a copy of the manual if you know how to thread the paper tape. I need a picture of the workings, to make sure that no parts are missing to do this. I figured out how to change the ink, but can't figure out the paper path so that it will feed past the ink roller.
Email me back if you can help. shannon165@gmail.com

Posted on Jul 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi,I need a manual and a key for this cash register. Can you help?


Your best bet is to phone or send me an email with address. Edmonton Cash Register Co. Ltd carry a huge inventory of ribbons and ink rollers for most cash register in the market place. Your Royal 125 is a older machine and the ink roller is IR40. Please quote the #'s. If you have any other question please contact us. Have a nice day

Mar 23, 2015 | Royal Cms 125 Cms-125 Cms125 Ink Roller...

2 Answers

My sam4s er-180t cash register wont respond it just beeps and comes up with E00


try to do an 'initial clear'
turn power switch on right side of reg to OFF pos
turn control lock to P position
press and hold SBTL key and turn power switch to ON pos
should print 'Initial clear ok'
might need to repeat a couple of times

Jun 22, 2014 | Sam4s ER-180T Cash Register

1 Answer

How do i install ink cartridge in royal alpha 1000ml


There is NO ink in your cash register.

Your cash register has a thermal printer that prints receipts for the
customer or a journal tape. Use 2ΒΌ inch (57.5 mm) wide standard thermal register paper. Do not use bond paper because the register does not use a ribbon or ink for printing.

See installing paper roll on page 13 of the manual

Royal 1000ML Instruction Manual

Nov 24, 2013 | Royal Calculators

2 Answers

My 480 NT Royal Cash Managment System shows "EE" on the screen and beeps not stop


turn the machine to PRG - unplug for 20 seconds. while pressing clr plug back in

May 25, 2009 | Royal Calculators

1 Answer

My royal cms487 plus cash register keeps malfunctioning after I reprogram it. I have the manual and follow the instructions, but it won't always allow me to do a full system clear. When it does allow it I...


Unplug register, put in program mode, hold down C key and plug in register while holding. Now you can turn key register mode. This should clear it. I just read it on another site and it worked for me!

Mar 04, 2009 | Royal X3 Calculator

2 Answers

Sharp electronic cash register XE-A203 - keeps printing receipt


I don't have this particular cash register, But I took a look at the manual and I recommend the following:

A. Turn the cash register off.

B. Unplug it.

C. Remove the batteries.

D. Wait at least five minutes.

E. Initialize the cash register. This procedure was copied from thwe manual:

In order to operate the cash register properly, you must initialize it before operating for the first time. Follow this
procedure.

1. Insert the manager (MA) key into the mode switch and turn it to the REG position.

2. Insert the plug of the AC power cord into the AC outlet. The buzzer will sound
three times.

IMPORTANT: This operation must be performed without batteries installed.

3.
The cash register has now been initialized. The register display will show
"0.00" and then “NO BATTERY”.

If the buzzer does not sound when the plug is inserted, the initialization has not been done
successfully. (This will occur when the voltage is high because you operated the cash register
before starting initialization.) Wait at least one minute after pulling out the plug and insert the plug
again.

F. Download trhe manual from here:

http://www.ormsson.is/skjol//skrifstofutaeki/xe-a203,213,303_manual.pdf

And proceed to program your sales tax (or VAT), departments, clerks, etc.

Jan 25, 2009 | Calculators

4 Answers

ROYAL ALPHA 587 CASH REGISTER


Try this, for example june 30 2004 =
Put the mode key in PRG position In round number keys press 063002 then press #/ST/NS key
If that works to set the time in round number keys press 1100 then press Qty/Date or 1305 for one 05 pm. I have a 587 cx and can't fiqure out how to print my reports X Z

Aug 21, 2008 | Calculators

1 Answer

Royal 100nx


Royal wil rebuild that printer, It use to cost $125.00 is it work it. Also many cash register dealers have the part. Most printers are an epson printer and parts are available....

Jun 26, 2008 | Calculators

1 Answer

Casio cash register model # PCR-202


E01 usually shows if you change the key position without clearing out register. Try going to each mode and pressing subtotal and then cash until the drawer opens. See if that helps.

Mar 30, 2008 | Calculators

2 Answers

Royal Cash Register 130 cx Does Not Print Correctly


Cleaning and alignment is needed to solve these problems. As you can notice, the printer has various gears and small parts on it. Although the alignment for this kind of printer model is too complicated that only an authorized technician is capable of doing it. If you can look for an authorized service center for your cash register on your area then try to contact them. They either render home service or you will have to bring your unit to them.

Jan 23, 2008 | Calculators

Not finding what you are looking for?
Calculators Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Calculators Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Stevan Milanovic

Level 2 Expert

243 Answers

Are you a Calculator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...