Question about Smeg Kitchen Ranges

Open Question

Model SMEG SA-708 Oven. Temperature overheat lot of smoke coming out of the oven fan force is working, When open the door. I think 2 problem it could be temperature control or knob control. How to repair. Thanks Tim

Posted by on

5 Suggested Answers

  • 183 Answers

SOURCE: Oven doesn't heat up

Problem is caused by out of calibration main oven thermostat or faulty (melted) function switch, only sollution check function switch for signs of melted or burnt connection other wise change stat. Regards Engineer

Posted on Jul 28, 2007

  • 209 Answers

SOURCE: smoke from oven

I am a recently retired appliance engineer of 20 years sounds like pure coincidence, check the fan for circuit at terminals, and / or check for movement of blades, that you have not got fan jammed, replace fan motor unit if needed, still cheaper than a call out if i have helped rate me work with safety all the time, unplug at all times when working on any item

Posted on Sep 09, 2007

  • 42 Answers

SOURCE: my viking electric oven does not have accurate temperature

how bad is the temp off?

Posted on Dec 21, 2008

  • 1 Answer

SOURCE: My Smeg oven heats up

Hello, my problem will soon be resolved by employing a professional smeg electrician who said I needed a new thermostat. Thank you for reading but I no longer need 'fixya' assistance this time around.

Posted on Dec 22, 2008

housejess
  • 317 Answers

SOURCE: My gas oven overheats and burns my baking. With

bad thermostat.....buy new at lowes .....its inside the oven.....usually at the top of oven..looks like copper rod with copper wire ....easy to change...buy at lowes or homedepot

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

GE oven, F2 message but fault is with broiler element staying on?


Hi there,

F2
Oven over temp - exceeded 590F with door in unlocked position or 990F with door locked - If actual temp condition occurred, look for welded relay contacts or high resistance connection or any cause in the oven temperature sensor circuit

F2
Note: Also see fan thermal switches - Indicates that oven is over temperature in one of the following modes within either a cooking or clean mode of operation.
· Control senses oven temperature above 650 degrees F with the door circuit in the unlock mode.
· Control senses oven temperature above 935 degrees F with the door in the locked mode.
· Stalled cooling fan or airflow problem.

· Look for welded relay contacts. (Heating elements on in off mode).
· Look for open thermal switch in lock motor circuit. Switch is normally closed and will open if area overheats due to fan not operating. Look for cause - fan thermal switch not closing, fan stalled, etc.
· Look for high resistance in the oven temperature sensor circuit due to high contact resistance (poor terminal crimp, deformed terminals, loose connection) or intermittent solder joint on control or intermittent oven temperature sensor.

Good Luck

May 26, 2009 | GE Profile JB968 Electric Kitchen Range

1 Answer

Smeg A1 cooker built in. Wish to remove top to access thermocouple. Cannot see the fixings for the top. Any pointers please?


my smeg oven has always never worked properly, the temperature is faulty etc i now want to remove this oven and have bought a new electrical oven but cannot seem to get the smeg oven out. How do i remove this smeg oven?

Mar 20, 2009 | Smeg A1A.1 Gas Kitchen Range

1 Answer

My Smeg oven heats up to extremely high temperature even when the gauge is on 50 degrees celcius so I've stopped using it because everything is getting burnt. To identify the model just before the word...


Hello, my problem will soon be resolved by employing a professional smeg electrician who said I needed a new thermostat. Thank you for reading but I no longer need 'fixya' assistance this time around.

Dec 22, 2008 | Smeg Kitchen Ranges

2 Answers

Smeg oven and hob ubit: Fan works but oven wont heat up


This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  2. If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
If this helped like us on Facebook please How to Video Tutorials on Domestic Appliances

Oct 05, 2008 | Smeg Kitchen Ranges

1 Answer

Smeg A2 - Oven gets too hot


is there a heat probe inside the oven? sound like you owen is overheating. i would check the TOD, if the oven has one. this thermostat regulates the temperature and if it's "open" it needs to be replaced.

Sep 13, 2008 | Smeg A2.5 Dual Fuel (Electric and Gas)...

4 Answers

SMEG SA420X


Not too common at all.Tough call ,you really can't hold the tenant at fault,replace the over priced clock and inform the tenant that the next one THEY will have to pay for.

Jun 02, 2008 | Kitchen Ranges

1 Answer

Smeg Oven electric burning smell


My Smeg cooker worked fine for 5 years. Then I noticed that the fan which stays on after you turn off the oven did not ever turn off, unless you switched the oven off at the fuse box. I think this is a fan that cools the oven down, but some bit of it is now broken because it doesn't realise that the oven has cooled down. It smells funny when you first turn it on, so I don't know if that is an electrical fault smell. Model possibly 70cm A420-5, but could be an earlier model (bought in April 2000). Is double oven with 4 rings on top, 70cm wide.

Mar 15, 2008 | Kitchen Ranges

2 Answers

Oven door won't unlock


I fixed the automatic oven door lock on my oven. While the door was open, I pushed the button on the upper left hand side a couple of times (the one that senses when the door is closed.) Then I was going to call the repairman when the door closed! I had to run the self clean cycle again to get the lock light to go off, but it worked!

Nov 25, 2007 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Smoke from oven


I am a recently retired appliance engineer of 20 years sounds like pure coincidence, check the fan for circuit at terminals, and / or check for movement of blades, that you have not got fan jammed, replace fan motor unit if needed, still cheaper than a call out if i have helped rate me work with safety all the time, unplug at all times when working on any item

Sep 09, 2007 | Kitchen Ranges

1 Answer

Electric oven fan


This problem is caused by one of two components, depending on the model, there is a thermal cut in thermostat that keeps the fan running until the unit has cooled down and on some models there is a four wire timing device that keeps the fan running for a specific time after the temperature drops, the fault can only be casued by one of these components. Smeg Service Engineer

Aug 21, 2006 | Smeg A1A.1 Gas Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Kitchen Ranges Experts

Carmen Mikulic

Level 2 Expert

409 Answers

Richard Ballard
Richard Ballard

Level 1 Expert

33 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Smeg Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...