Question about Projection Televisions

4 Answers

AKAI LCT2070 LCD TV The RF IN broke off. The piece that the cable line connects to. Can that piece be replaced and is it something that I can do myself.

Posted by on

  • Fay Flemister Sep 05, 2008

    Is this a part I can replace myself and what is the part called or the number

  • Fay Flemister Sep 05, 2008

    Yes, thank you now I know that I need to take to a repair person.

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

You can go to a radio shack or similar type store and buy the the replacement for around 6 dollars to replace it in the set is quite simple and if you have the skills to do it it will at least save you 50 bucks on the service call alone. it's called a RFcoax input and it's a simple fix...good luck please rate thanks

Posted on Sep 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 6,487 Answers

Yes, that can be replace but I think it will be better if you let a technician do it for it since you will also be needing some equipment in replacing it..

Hope that helps.........

Posted on Sep 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 638 Answers

Replacement is necessary by a proper technician as the cost will be very minor under service charge.doing without proper knowledge is risky
thanks.
pls do rate the solution

Posted on Sep 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,029 Answers

That can be replaced

Posted on Sep 05, 2008

  • Starnley Johnwells
    Starnley Johnwells Sep 05, 2008

    that can be best done by a qualified technician

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The antenna/cable in threaded piece has come out of the back of the tv. How can I fix that. I tried to put it back but it won't stay. I think I need a new one.


These sets have what is known as a on board Tuner. This means that the Tuner is not replaceable without replacing the entire Board. The good news is that you can replace the Cable/RF connector as long as the shield it attached to is not broke or too bent. Most of the Cable/RF connectors used in these sets have PCB mount . You will have to remove the Signal Board and unsolder the center connection of the broken connector left on the Board. Remount the new
Connector and solder the center connection. You may need a collar nut to secure the Connector the the shield.
I hope this helps,
Skyassoc

Nov 12, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

I JUST BOUGHt a ps3. I am trying to connect it to my tv through a converter box. I have it all connected, but it does not play on my tv screen. What can I do to make it play?


What do you mean converter box? RF converter? The video audio cables (R,W,Y) should be connected to the matching colors on the RF converter and the RF cable (standard cable)should be connected from the RF conv. where it say "to TV" to the TV and the TV should be set to either Ch3 o Ch4 (you can usually choose on the RF conv.) the cable from the cable provider should be connected to where it says "in from antenna or cable in on the RF conv.

Oct 17, 2009 | Projection Televisions

1 Answer

Input cable piece broke off akai pt5499hd


The coaxial input can be soldered back in. You will need a new one however. Sometimes the internals in the tuner (where coaxial goes) may be damaged when coaxial connection breaks out. If that is the case a tech may charge more money. But just to replace the connection should be relatively inexpensive.

Apr 23, 2009 | Projection Televisions

1 Answer

2006 Akai 23" Led TV says it gets no signal.


hi, the input blocks are where you will need to look for this problem. sometimes these block connection become lose and detached from the main logic board. this could happen due to a minor crack in the solder or to much pressure when inserting cables and input rac jacks etc.. replacing or repairing this section of your TV's board will fix this issue.

Feb 25, 2009 | Akai PT4298HD Rear Projection Television

1 Answer

I broke off coax cable on back of 32 inch tv. I can watch dvds with AV cables but not cable TV. How do I connect cable from wall to tv if coax is broken off


This depends on how many available inputs you have on the back of the set. If you have more available you can just hook up the cable box composit (yellow, red, and white cables) if not you will need to replace the rf connector or tuner in the set. let me know if you need more help.

Tim

Sep 11, 2008 | Projection Televisions

1 Answer

My TV is fine...problem happen when I was moving today,not sure what its called but its the silver projection located on the back of the TV is which you connect the cable on the wall too...it broke...


Hook the cable up to the VCR or if you don't buy a RF converter from radio shack or electronics store which will have a coax connector on it with component and Svideo to send to the TV. Select the connection (Component or Svideo) in the TV menu. If you only have the coax connector on the back of the TV without any other connection, you will need to get that tuner board replaced.

Aug 18, 2008 | Projection Televisions

1 Answer

Philip TV - Cable connection on back of TV broke off. How do I repair it?


If the rf input is broken off you can usually get the rf input replaced pretty cheap from a tv repair store, if it is the component or composite inputs then you have to replace the Small signal Board which is a way more expensive fix

Aug 11, 2008 | Projection Televisions

1 Answer

Rca tv


It is called and RF connector. Unless you are very skilled at removing the tuner from the SSB (small signal bd) identifying trace paths and soldering I would reccomend a qualified service provider to replace this part. Another option would be to simply replace the tuner (the rf connector is pressed into the tuner). If you provide the service # from the back of set I can provide the part #'s.

Mar 01, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

AKAI Rear projection TV


Try using different inputs besides the RF input. Connect your PS2 and DVD player using component inputs. With two component inputs, there's no reason in the world not to do this.

Feb 28, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

Picture


Ther is a test you could do is you had the proper equipment, and that would be to inject a know good RF signal into the tunner F connector and chech tha point where the RF/IF is converted to audio and video, to determine if the proble is a bad tuner or not. The equipment is a VA62A Universal Video Analyzer. Its a great piece of equipment for this type of work. another thing you can do is get an RF Modulator from Radio shack and input a video and audio signal in to it and set it to channel 3 and connect the F connector to the TVs F connector. The set the TV to channel 3 you should see the picture and hear sound in channel 3. The VA62A is best because you can set it to emulate all of your channels from 1-87 standard TV and Cable TV. In any event a test needs to be run to see if the tunner is at fault.

Aug 23, 2007 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...