Microtek ScanMaker 3600 Hardware

First connect your scanner to computer with usb cable.
Then insert disk in rom then install driver and software from disk.
It is not matter that first you connect scanner or install driver but if you connect scanner first your computer recognized it then you can install driver from disk.
Let me know if you need further assistance.
Thanks for using FixYa.

Something old enough to work on Windows 98 probably won't be very happy on Vista ... however, I'd try the XP version of drivers before you teach it to fly!

Click the big green Download button on this link ...

http://download.cnet.com/ScanMaker-3600/3000-2118_4-66588.html

Hello

According to Microtek, there are no Vista drivers for your model.

Drivers http://support.microtek.com/product_dtl_2.phtml?prod_id=5

Comment about Vista drivers: http://support.microtek.com/knowledgebase_1/kbdtl.phtml?request=KB-00056SW

Best regards,
Zizzler

hi! Download from here:
www.nodevice.com/driver/ScanMaker_3600/get25847.html - 16k -

www.driverslab.com/drivers/Scanner/Microtek/ScanMaker_3600_5_95-Windows_95_98_ME_NT_2000_XP/2084.html - 18k -

www.opendrivers.com/freedownload/211404/microtek-scanner-scanmaker-3640-t-3600-i300-driver-scanwizard-5-v... - 26k -

Go to
http://support.microtek.com/product_dtl_2.phtml?prod_id=4

and download driver.

If running XP SP2, then try clicking Start > right click My Computer > properties > Hardware tab > Device Manager button > expand Imaging devices > right click on your Microtek ScanMaker > uninstall > Re boot > and let XP pick up the device and let the found hardware wizard configure it.

I have seen plenty of hardware that when following the devices manufacturer's instructions for install, such problems as you're having occur and XP SP2 usually will cure it, though you may still need the device manufacturer's CD (for the driver) in your optical drive.

This link: http://support.microtek.com/downloads/bymodelname.phtml?viewtype=2&srch_in=ScanMaker+5950&frmsearch.x=10&frmsearch.y=11&frmsearch=Search&frm_rqst=2&axn=1 will allow you to select between the 5950 and 5950 Pro then on the next page you will be able to download the latest XP driver for your Scanmaker among drivers for other Operating Systems also.

I hope this helps, and Good luck.

Here you go my friend...

http://support.microtek.com/product_dtl_2.phtml?prod_id=4

Here you go.


http://support.microtek.com/product_dtl_2.phtml?prod_id=5

OK WELL I HAVE A MICROTEK SLIMSCAN C3 AND I HAVE THE CABLE FOR THE POWER AND FOR USB......BUT MY PROBLEM IS THAT I DON'T HAVE THE CD TO INSTALL THIS.
IS THERE ANY ONTHER WAY TO INSTALL THIS IN MY COMPUTER WITH OUT THE CD??????
PLEASE EMAIL ME TO gemalabonita92@hotmail.com IF U HAVE THE ANSWER TO MY QUESTION!
THANK YOU!

Check for latest drivers Maybe your Mac O/S does not like it or a recent up date conflicts