Question about KLH DVD8350 DVD Player

1 Answer

It reads "No Disc"

I have had this DVD for six years. It has been great so far. I only got the "No Disc" messages when a DVD was dirty, so I cleaned it. Now all my DVD's don't play and it says "No Disc". I got a DVD cleaner from Fred Meyer and tried to use it but it also read "No Disc". It the DVD dead?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Remove the cover. push the lense out ward with your finger. Clean the lense with a q-tip soaked in eye drop fluid or rubbing alcohol. Wipe it dry with the other side. Mine works great now

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wont read discs

follow this steps, and use the common sense.God bless you
If the player skips, make sure that the DVD disc is not dirty or scratched..Use the cleaner disk buy it from R. Shack.
If the tray won't open or close properly, check the belt for dirt or wear. Then check the tray for misalignment. If needed, remove, clean, lubricate, and reinstall the tray following the instructions in the owner's manual.

Sep 19, 2012 | Panasonic DMR-EZ37VK DVD Recorder / VCR...

1 Answer

I have an emerson dvd/combo player and i have had it for at least six years. now i am receiving the error message "unable to read disc" for movies that i have purchased

Insert a head cleaning disc into it and play it for atleast two times. The fault is with Laser Pickup Unit [ the reading head]. If the fault is due to dust or fungus on its focussing lens, the cleaning disc will wipe it off. If this does not help you, there is no other way than replacing the Laser Pickup Unit with same type and number fitted now. OK.

Jun 06, 2011 | Emerson EWD2003 DVD Player/VCR

1 Answer

When attempting to record on a new blank dvd (-R), I receive an error code c1300 for a dirty disc. I have cleaned several discs and all stop after a minute or so, followed by the message dirty disc with...

the burn laser is dirty clean it using a laser disc cleaner avaliable from all good electronics shops that sell tv and audio decks hers a picture of what they look like


Dec 28, 2010 | Sony RDR-GX300 DVD Recorder

1 Answer

My LG DR389 Recorder is nearly 2 years old, was working fine until recently, when it began not to read DVD discs recorded by it:the error message "cannot read disc due to disc error"shows up.I noticed by...

A common reason for dvd players to give you error messages like "bad disc", "incorrect disc", "disc not readable", etc is that the optical lens needs to be cleaned. Dust will build up over time and prevent the device from reading the discs properly. Discs that are dirty and have finger smudges or if the discs have scratches will also cause these errors. There are some common mechanical problems that will also cause disc reading problems which you can find in my tips and tricks, just click on the link to read more about them.
You can clean your dvd player two ways, manually or by using a dvd cleaning disc. The following link will provide you with detailed information for doing cleaning the optical lens. I would suggest that you use the cleaning disc because it is easier and much faster. You can also clean your dvd discs themselves using the information here.
I hope that this information helps you solve the problem and you get many more years of use from your device. I wish you all the best. Please let me know if you need further assistance and I will do my very best to help you.

If you would not mind, please rate my help. I would greatly appreciate it. Thank You.

Aug 13, 2010 | LG DVD & Blu-Ray Players

1 Answer

It's keep loading, say bad disc

The main cause for dvd players to not be able to read the discs and give you error messages such as "bad disc", "disc not recognized", etc is due to the optical lens being dirty or the discs themselves are scratched or dirty. There are a few more things that can cause similar problems, but these are by far the most common.
There are two ways in which to clean the optical lens, either manually or by using a cleaning disc. Using a cleaning disc is much easier and faster. Cleaning one manually requires you to open and remove the cover and the lens can be difficult to get to.
The following links from my tips and tricks will give you more detailed information on how to use both methods of cleaning the optical lens. You can also review an easy way to clean your cds and dvds as well at the following link. I would also like to provide you with some additional information about common mechanical problems with dvd players in case you need future information about problems.

I hope this information helps solve the issue you are having with your dvd player. If you need further assistance please feel free to ask and I wish you well.

If you would not mind, please rate my help. I would greatly appreciate it. Thank You

Aug 04, 2010 | Cyberhome CH-DVD 300 DVD Player

1 Answer

I've had this DVD player for a while and haven't had many problems until now. Any kind of DVD I put in the player, it says it's loading for a while, and then comes up with the message "Wrong Disc", for...

Hello kpohl385,
Sorry to hear you are having some problems with your player, but hopefully I can help you solve the problem. The following are some common reasons why dvd players fail to read discs or give you error messages.

1. The discs are scratched or dirty. If you hold them up to the light and tilt them, you will be able to see smudges, finger prints, scratches, chips, etc. Since your player is not reading any disc (even new ones) this does not sound like the problem, but still needs to be considered.
2. The optical lens that reads the discs is dirty and needs to be cleaned. According to the description you have given of the problem, this sounds like the most likely source of the problem you are having.
Here is a example picture of what the optical lens looks like:
3. The spindle motor could malfunction which will cause the disc to not spin at all or spin erratically. If a disc will not spin properly the laser inside will not read the information on the disc.
4. The optical assembly has malfunctioned and the laser that reads the information is not working.

You can also read my tips and tricks section on the most common reasons why dvd players fail, which will provide you with more in depth descriptions, pictures, and information.

The easiest way to clean the optical lens of your player is by purchasing a dvd cleaning kit. You can purchase this kit at most stores that sell electronics such as Wal-mart, Best Buy, Circuit City, etc. They are not expensive. You can also clean the optical lens manually and you will find information on how to do this here. I would also recommend you purchase a disc cleaning kit as well. This will help keep your dvd/cd discs in good working order and help remove dirt and scratches and they are also not expensive (this is totally optional) and can be purchased at the same type of stores I mentioned above. You can also clean your discs manually, but it will not really help with scratches. You can find step by step instructions here.

Here is a example picture of what a dvd cleaning kit looks like:

All dvd/cd devices eventually fail over time, but by far the most common problem is just a dirty optical lens or dirty or scratched disc.
Sorry for all the links, but if I posted all the pictures and instruction on here, it would look like a novel :-).

I sincerely hope that this solves the problem you are having. Please let me know if you need any further assistance and I will be more than happy to try and help you to the best of my abilities. I wish you all the best.

If you would not mind, please rate my help. I would greatly appreciate it. Thank You

Apr 22, 2010 | Protron PD-800 DVD Player

1 Answer

I get the message "bad disc" with every disc I put in the player.

ok best bet is that your laser (what reads the discs) in your laptop is dirty, use a cd/dvd cleaning disc to clean the laser, can buy them from most computing, music shops

Jun 29, 2009 | Polaroid Portable DVD Player PDM-0822BD

1 Answer

Bad disc message

Did you try cleaning the eye i have had dvds that would not play because the eye was dirty

Mar 10, 2008 | GoVideo Go Video DVD/VCR Combo

Not finding what you are looking for?
KLH DVD8350 DVD Player Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top KLH DVD & Blu-Ray Players Experts


Level 3 Expert

96738 Answers

The Knight
The Knight

Level 3 Expert

68427 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a KLH DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides