Hdmi has no volume from sources - Pioneer VSX-D409

Tongfang, or Element TV
You will need to select a sourse.
Your remote should allow you to choose a source .
Most will have an HDMI 1 and or HDMI 2 as well as TV for direct Co Ax cabling.
Once you’re connected to the correct one you should have a media connection

37" Elonex Widescreen HD LCD Television (Black) - Aria ...

www.aria.co.uk/.../Televisions/.../37%22+ELX+Widescreen+HD+LCD+T...

Buy 37" Elonex Widescreen HD LCD Television (Black) - HDMI, 1366x768, 1200:1, 8ms Product Name: 37" LCD TV Model No: LT37V1 Main. ... 49~61KHz; FrontControls: Power, Source, Menu, Channel Up, Channel Down, Volume Up, ... Have you tried it with a HDMI connection as I can't seem to get mine to work with my ...Missing: playstion

[PDF]Operator's Manual - SunBriteTV

https://www.sunbritetv.com/media/pdf/...R/3230HD-Op-Manual.pdf

6) Do not install near any heat sources such as radiators, heat registers, stoves, ....Water-Resistant. Wireless Remote. Control. Model 3230HD. TV Installation .... If youcannot achieve that ... to both your DVD player and Composite's S-Video connector ....Connect an HDMI cable to the HDMI output of your Playstation 3.Missing: elonex

If you have the remote for the television you can select the input channels by locating the "Source" or "Input" button. You'll then be able to select HDMI, VGA, TV, etc.

If you're lacking the remote the television itself should also have an Input/Source button in which you can then use to select HDMI.

Note: If using the television buttons pressing the Input/Source should cycle through the available selections, if not you may need to press this button ONCE and then cycle through your choices using Volume or Channel buttons. Once highlighted for a few seconds it should automatically select the desired channel - if not you will need to press your Input/Source button again to confirm your selection.

Hi,
Hope you are using the buttons on the tv.
press the source button repeatedly to select the desired input. every time you press the source will change HDM1, HDMI,2 and so on
If it didn't t work try the following
Press the source button and then press volume up or down or channel up or down to select the source. and then press ok , if ok button is not there the do not do anything it will automatically set the selected input
www.electro-medical.blogspot.com

read your manual,you forgot to tell us what tv it is

Sometimes you can unplug the hdmi cable and power off the tv and unplug power to tv wait 10 sec plug tv back in and then insert hdmi cable. Some of the newer tvs will auto tune to the input if that dont work, try getting a universal remote program the remote to control tv if you can control tv volume, power , menu then you should be able to navigate to the input menu and select hdmi that way

Could be the HDMI bank, try the DVI hook up, you won't have HD but it would give you knowledge.

My sceptre tv just started randomly changing through input modes, sometimes once or twice before stopping and sometimes it continues

If you're expecting multichannel sound FROM THE TV instead of from the source you're watching, it's not gonna happen. TV's are notoriously poor sound sources. This one is no different.

Multichannel TV-related audio is best found at its source - cable / sat / dvd / bd....

I run video-related audio from my video sources directly to my TV and their audio directly to my receiver. Specialization yields best results.

I'd recommend skipping the Receiver for video, too, as it adds a lot of opportunity for HDMI-related incompatibilities and sound syncing problems. The more interconnects in the path, the more distorted it will become and the more opportunities for problems. Plus you can bypass the receiver and listen to lo-fi programming like news and weather through the TV's speakers if you like. Save a buck on electricity.

Just curious, which HDMI on the receiver is connected to your TV? Input or Output?

This note is on Page 11 of the manual:

Audio signals input at the HDMI jack are not output from any speaker terminals but output from the connected video monitor. To enjoy the sound from speakers connected to this unit,
-- make an analog or digital connection besides the HDMI connection (see page 13).
-- mute the volume on the connected video monitor

================
"Check SP cable." -- The unit is perceiving a short circuit. Are your speaker impedances sufficiently high? Disconnect the Front Right speaker and try raising the volume again. The speaker may be blown or the cable shorting.