Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Won't empty water

My drawer model is only 18 months old and now it won't empty the waste water. The company want 50 dollars for the repair manual. Any body else having this problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

I assume you mean dishwasher and not washer ck drain hose under sink if not installer properly hose tends to pull down and kink ..should be installed vertically not horizontal also be sure to clean under inside screen in bottom may be plugged also have you replaced disposer or installed one recently if so be sure plug in drin connection has been knocked out..if that is a washer get as much water out as possible lean washer backward against wall pump may be plugged pump just twist locks in bottom of tub and hose clamps can be removed with fingers NO TOOLS NEEDED!!!!!!!!

Posted on Sep 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine not pumping out water


The pump may have failed independently of age.

Jul 07, 2016 | Hotpoint Washing Machines

1 Answer

I have a zanussi zw1125 washing macnine im finding it difficult to operate sometimes the clothes are not spun out and i cant get the spin to work can you give me the download instructions for this model


You can download the manual at:
http://dl.owneriq.net/2/2ff74170-aa6b-46f6-a0eb-cfe82f3eb026.pdf

I would suggest that you go straight to "Cleaning the pump" on Page 18. I would strongly suspect that this may be the cause of your problems.

The empty cycle is timed and if it can't get all the water out in time because the empty pump filter is blocked and slowing the empty down, then it will fail safe and won't step on to the final spin cycle with excess water in the drum.

Jul 06, 2011 | Zanussi ZWF1440 Front Load Washer

1 Answer

How much bleach do you add during cleaning cycle?


If the model number is correct, to run a "Clean" cycle on this model washer you need to follow these steps:

1. Make sure wash tub is empty and close the door.

2. Open the dispenser drawer and remove the plastic divider in the MAIN DETERGENT compartment.

3. Select the following options:

a. Select the POWER button.
b. Select RINSE/SPIN.
c. Select LOW SPEED SPIN.
d. Select WARM/COLD water temperature.
e. Select END OF CYCLE SIGNAL to SOFTER.
f. Press EXTRA RINSE button 4 times within 5 seconds and the
will begin.

4. The washer will run a short sensing cycle for about 3 minutes.

5. The washer will beep 4 times and a code will appear on the front panel display.

a. If "Ab" (Add Bleach) appears - skip to step 6.
b. If "Rl" (Remove Load) appears - the door will unlock and you
need to double check the wash tub for any items. Close the
door when complete and press the START button.

6. Add bleach. If this is the first time running the clean cycle add ONE CUP of bleach to the detergent compartment of the dispenser drawer. If this is a monthly routine, add only 1/3 CUP of bleach.

These instructions are listed on page 18 of your owner's manual. If you no longer have a manual, yo can obtain a FREE copy at managemylife.com. Just type in your model number under their "Manuals" link and you will find it listed in .pdf (Adobe) format that you can download or print for free.

If you have questions, please post back and let me know. I hope this helps you.

Aug 17, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Drawer not emptying


Suggest you pull the drawer right out and look for the hole in the bottom of the drawer where the conditioner is meant to drain out.

The top of this hole whould have a removable cover over it. What normally happens is that the inside of this cover gets choked with old conditioner.

Take the cover off and give the whole thing a really thorough clean with hot water and an old toothbrush.

A.

Apr 30, 2010 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Hi, I'm looking for help with my hotpoint wmf740 washing machine.


A couple of possibilities here.
It could be a sticking water inlet valve, or water syphoning back into washer if the drain outlet hose is joined into the sink waste outlet.

To check which it is, turn off the water supply to the washer and leave for a day or two, if no water comes in, then it is a sticking inlet valve which will have to be replaced.
If water still comes in after turning it off to the washer, then it is the waste outlet pipe that will need to be lifted up higher to prevent water coming back into washer from sink waste.
Please rate my solution.
Thankyou.

Jan 15, 2010 | Washing Machines

1 Answer

Whirlpool 6245e top loader machine does not spin or wash at all


Hope that no money is required.\
Check the drive belt between the motor and the transmission. If wet or oily or loose, correct the problem and test.

If leaking water, you may have a loose hose fitting, check them with a flashlight while running a test cycle. If not a hose, then a seal (not practical to repair yourself).

FINAL NOTE: DO NOT spend more than 75 dollars to repair a 3 year old or older washing machine. You can buy a used one that works fine for 50 to 75 dollars on Craigs List or other local web site.

Best of luck. -Jim

Oct 21, 2009 | Washing Machines

2 Answers

My Frigidaire Affinity front loader smells like mold


have you cleaned the main waste pipe as this surpisingly enough gathers a lot of gunk and in warm weather makes it smell,i say this cus we expeirieced this and i replaced rather than cleaned the waste pipe,worth a try it worked for me,rgds paul

Jul 07, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Water is pouring out the drawer for laundry soap


I had the exact same problem with my HOTPOINT washer/dryer and called an engineer out.Turns out the filter was blocked.Older hotpoints like mine(4 months old lol) do not have a filter at the front bottom but actually has it on the back behind a plate which is held on by 2 philips screws.Then you should see a hose that needs unclipped(this pipe is the waste water pipe) and hey presto the blockage can be removed.Care should be taken when putting back together to ensure it is put together EXACTLY the same.Also please ensure the electricity is switched off prior to removing anything.

Jan 03, 2009 | GE Energy Star WCVH6260F Front Load Washer

2 Answers

Washing machine


i had the problem of my brand new washing machine not taking the conditioner and the customer service advisor rightly guessed that i was using concentrated liquid and advised me to dilute it with warm water then put it in the drawer because sometimes the liquid is too thick for the machine to take.try this!!!!! regarding the powder why not put it directly in the machine or buy tablets and do the same with those

Dec 18, 2007 | Hoover PE235 Front Load Washer

3 Answers

Water will not empty


Hello
you either have a blockage in the filter or you pump is not working.
how to check is diconnect the waste pipe and lower it to ground level if the water does not empty then its a blockage. if it empties then its the pump.
other things it can be is a blockage where the waste pipe is connected or a loose wire to the pump..

Dec 13, 2007 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...