I have a mio h610 when i try to run igo i got message "hardwareIDchanged" how i can fix it?

Connect your GPS to a computer. Use explorer to explore the contents of your device. Locate the intruders, select and delete them. make sure you do not remove your maps (if you have no backup).

Shane080,
how do you unlock c520?
please advice...

hold down on/off button until it reboots

you cna't update, only reload original from the cd that came with your gps

Hi, i uploaded the drivers for Mio C220. Enjoy it :)
http://rapidshare.com/files/220860843/USB_DRIVER.rar

It can be fixed...this is happening because you changed the sd card that contains the gps software. Uninstall the gps software from the device ( remove installed programs) and then install again. If it shows you again the same error, your gps software is pirated and you must buy an original one, or find a better cracked one ;). Remember : DO NOT DUPLICATE ORIGINAL SD CARDS because the licence file will not work and you will get that error "hardwareIDchange" ( "hardwareIDchange" it says that your sd card hardware id has been changed)

Do a hard reset, by flipping the power switch on the bottom. Leave it off for a minimum of 30 seconds. then turn it back onn, the firmware bac-up will be restored at that time.

Turn the power switch on the bottom of the unit off for at least 30 seconds.

Refer to this manual it has all the info you need. Click on the the link below to download
http://www.mio-tech.be/Manuals/269+/Device-Manual/268-plus-269-plus-Device-Manual-EN.pdf

oprn that folder and there you find the licence detail and fill in the licence detail and then turn off and turn on device and it will be done.