Question about Riso RZ220 Duplicator

2 Answers

Riso 1610 code e-07

In code not work

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

Press the reset button

Posted on Sep 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Turn off machine and while you turn it on again,hold the 2 arow buttins on the left of keyboard in at the same time. You will then go in tech mode and you will see 3 numbers. Type in 113 and then press green button. You will then hear a sound off somthing lift up and go down. Press green button again till the sound stops. Turn off machine and turn on again and there you go. Remember the to arrow buttons must both been press and hold them in while you turn on machine. If the code appears again then your master removal gear is broken. E - 07 meens,master removel motor lock.

Posted on Oct 08, 2009

2 Suggested Answers

  • 11 Answers

SOURCE: riso cr 1610

You will have to select corect machine model in service mode 200 , nomaly it is d but you will have to select between 1 and f to find the corect setting or just make sure that your cable is connected corectly

Posted on Dec 01, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code H21 to recitify this error code


Hi more information needed make & model,.., Cheers

Jan 15, 2017 | Office Equipment & Supplies

1 Answer

The code h5 is showing don't know what it means unit not working


sadly when you do not state what you have . such as MAKE type of unit . there is nothing any one can do to assist you

Jan 14, 2017 | The Office Equipment & Supplies

1 Answer

5C00 Error Code as well as yellow and green alternating lights


To fix this error is much easier than it looks. Unplug the printer power. Move the ink cartridge cradle to the left. Over to the right you will see a small pad about 1cm square. This pad and the area around should be covered with ink. Get a cloth and press down on this pad - it's not fixed so should come away with the cloth, otherwise use tweezers gently. Squeeze the pad several times between your thumb and forefinger while inside the microfibre cloth to remove ink build up. Then when not much ink comes out on the cloth, clean the area in the printer around the pad so that looks free from ink too. Then position the pad back in place, move the cradle back into position, plug in and switch on - should work fine now.

Jan 14, 2017 | Office Equipment & Supplies

1 Answer

My MX922 printer worked well this morning. All cartridges have ink but ALL lights under the cartridges are on and print comes out blank. There are no error codes or anything abnormal displayed


This problem is mainly happens to all inkjet printers. If your printer print blank pages then please at least once go to official site of Canon and check whether there is any printer/scanner drivers update is available or not. If yes then download it. Also check your ink cartridges. Because if there is no print on paper that means your ink might be dry.Sometimes it clog the print head. If your ink cartridges get dry change it. Or you should clean your printer's print nozzle by using printer's control panel. I hope all these suggestions helps you. If doesn't then watch Canon MX922 Manual English

Jan 12, 2017 | Canon Pixma MX922

1 Answer

How do I correct error h5 on a Sharp printer AR-5620N?


Hello Sudhir,
The error code H5 means there was at least 5 pages in a row where the paper did not come out of the printer correctly (most likely paper jams. The following manual will direct you on the steps needed to clear the code, please note especially page #8-3
Service Manual SHARP AR 5618 5620 5623 SME

The following video should help also;

Jan 09, 2017 | Sharp Office Equipment & Supplies

2 Answers

How to download samsung ML-1666 printer driver for windows 7 32 bit


Dear
In windows-7 , the printer automatically down load from samsung website, if the PC detects the printer(try the usb cable conneting from the back panel of the PC). Also you may download from samsung website. Printer Support SAMSUNG India Printer Support SAMSUNG India Printer Support SAMSUNG India

Put your model code on search pocket and click .
Thanks.

Feb 17, 2015 | Samsung Office Equipment & Supplies

1 Answer

My printer brother dcp7065dn disply 71 and72 error


This is codes for the ink cartridge. The code means there is a problem with the cartridge. Change them both and restart the machine.

Jan 13, 2015 | Office Equipment & Supplies

1 Answer

I have a donated photocopier for the scout group and it has a code which no-one knows. Speaking to an IT Engineer we should be able to rest to factory settings. We have tried Admin as user name and admin...


Really depends on the model/maker.
Sharp photocopier? try one of those: (note the capital A and S )

Login Name: Administrator
Password: admin
or

Username: admin
Password: Sharp

Oct 02, 2014 | Office Equipment & Supplies

1 Answer

Scanner computer cant comunicate


What do you want Darrell?

Code reader or Professional scan tool?

I think your going to need a shop to work on it

Without wiring diagrams your done

You have to chase every wire from the under dash
connect to their ends, until you fix the issue & can
connect to the Bus & Data stream,we can't help with that

Jul 17, 2014 | Office Equipment & Supplies

1 Answer

Error code 3501


HI
I HAVE KONICA C6500
ERROR CODE 3501 and 3802 but know the error 3501
I know it rech high temperature I change the sensor 1 UP fuser roller
and I reset the error, the machine start and stop again with error 3501

Oct 01, 2013 | Konica Minolta Bizhub C 6500 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Riso Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Marius Chiriac

Level 2 Expert

231 Answers

yadayada
yadayada

Level 3 Expert

66902 Answers

Are you a Riso Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...