Question about Texas Instruments 30XIISTKT1L1A Calculator

Thinks informatica , & The Link Is Not Valid !

Posted on Sep 04, 2008

Hi - You can download the manual by clicking the link underlined in blue below:

TI-30XIIS

There is also a teachers guide, See page 89:

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Posted on Sep 04, 2008

Exponents of 10 are entered by pressing [2nd][X^-1] (EE).

For powers of any base, enter the base, press the [^] (below PI) then enter exponent. Use the (-) white key if exponent is negative.

For powers of any base, enter the base, press the [^] (below PI) then enter exponent. Use the (-) white key if exponent is negative.

Apr 30, 2014 | Texas Instruments TI-30 XIIS Calculator

You are not using it correctly. To calculate the exponential of a number you use the key sequence [SHIFT][LN] to access the exponential function. Then type it the exponent (positive or negative) and close the parenthesis.

You do not use the power key (^)

The exponential function is not affected by the angle unit when you are using real values.

You do not use the power key (^)

The exponential function is not affected by the angle unit when you are using real values.

Jul 03, 2012 | Texas Instruments TI-84 Plus Calculator

On this calculator the exponential function requires the argument be entered first. To calculate the exponential of a number, you enter the exponent (0.08) then press [2nd][LN].

For your calculation, you should calculate e^(0.08) then multiply the result by (5000x2=10000). The result should be 10 832.87068

For your calculation, you should calculate e^(0.08) then multiply the result by (5000x2=10000). The result should be 10 832.87068

Feb 25, 2012 | Texas Instruments TI-30XA Calculator

If you want to raise a number to another, use the ^ key located just above the divide key.

For natural antilogarithm (exponentiation of e), use 2ND [e^x] (the shifted function of the LN key).

For common antilogarithm (exponentiation of 10), use 2ND [10^x] (the shifted function of the LOG key).

To enter a decimal exponent as part of a number, use 2ND [EE] (the shifted function of the comma key, located just above the 7 key.

For natural antilogarithm (exponentiation of e), use 2ND [e^x] (the shifted function of the LN key).

For common antilogarithm (exponentiation of 10), use 2ND [10^x] (the shifted function of the LOG key).

To enter a decimal exponent as part of a number, use 2ND [EE] (the shifted function of the comma key, located just above the 7 key.

Sep 08, 2011 | Texas Instruments TI-84 Plus Silver...

I think what you did was use the minus sign instead of the negative sign, on that calculator, the two are not interchangeable. I purposely used the minus sign just now and also got a syntax error, but it looks like it works with the negative sign (-) located under the 3 button.

May 08, 2011 | Texas Instruments TI-30 XIIS Calculator

The same way you type in a negative number. Make sure you use the (-) key just to the right of the decimal point key to enter a negative sign, not the - key you use for subtraction.

Mar 23, 2011 | Texas Instruments TI-30XA Calculator

You can raise a number to any power by using the ^ key (above and left of the 7 key). For example, to find 5 cubed, press 5 ^ 3 =

Oct 16, 2010 | Texas Instruments TI-30 XIIS Calculator

The same way you'd work with positive exponents. The only difference is that a negative exponent has a negative sign, entered with the (-) key just to the right of the decimal point.

The (-) is used to enter negative numbers, not just exponents. The - key is used to subract one value from another.

The (-) is used to enter negative numbers, not just exponents. The - key is used to subract one value from another.

Sep 23, 2010 | Texas Instruments TI-30XA Calculator

If you're asking about entering powers of ten, use the EE (enter exponent) key just above the 7. If you're asking about exponentiation, use the y^x key just above the divide.

Jun 12, 2010 | Texas Instruments TI-30XA Calculator

Press [2nd] [LOG] to display the menu for logs and exponential functions. Select [LN]. Enter the (positive) number, close the right parenthesis and press [ENTER].

Oct 07, 2009 | Texas Instruments TI-34II Explorer Plus...

Dec 02, 2016 | Calculators

267 people viewed this question

Usually answered in minutes!

×