Question about Ariston Technologies AW129NA 16 Lbs Front Load Washer

1 Answer

Closed door Please how can I open my front door of my machine that is locked. I was told that is time locked.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Dear babmat: just now got your question. We are very satisfied with our ARISTON Washing Machine. I trust that that is what you are inquired about? I had the same problem the first time. This locking occurs when one opens or tries to open the washing machine door too soon!!!! It has to be left alone for a few minutes. When I waited and later tried again to open the machine, I did not have a problem.
Just wanted to leave this note for anyone who encountered the same problem. You, yourself, hopefully, might have gotten that answer and the problem fixed in the meantime!?
Greetings, handinovice

Posted on Nov 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer is not working?


Most likely solution: The door latch assembly. When the door closes, the internal latch electronics must "sense" that the door is closed, but sometimes doesn't. When it correctly senses a closed door, it "locks" the door (electronically) and the door can't be opened until the machine has been OFF for about 100 secs. If the door doesn't "lock" when closed, it's just not sensing that it's closed. Solution: Close the door a bit more forcefully. I've seen cases where the door would need to be closed pretty hard, 3-4 times before it "locked". Once it senses the door is closed, and locks, the machine operates normally. The latch assy can be replaced, but often develops the same problem, eventually. Slamming the door won't hurt it.

Jun 18, 2015 | Malber WD2000 Front Load Washer / Dryer

1 Answer

NEXXT 300 FRONT LOAD WASHER SHOWS CODE E-01. DOOR WILL NOT OPEN AND THE HOW TO VIDEOS ARE ALL FOR MACHINES WITH COMPLETELY ROUND DOORS, THIS MACHINE DOOR HAS LARGE PORT HOLE IN A SORT OF THUMB SHAPED DOOR....


Have you tried powering off/disconnecting the power cord to the wall? Then try plugging it in and turning it on - it may revert to the default "unlocked door" state.
If the door is still locked there is generally a manual release that is accessed from a panel that you need to remove below the door lock mechanism. On my model I had to prop up the front of the washer to access the screws - the panel runs the full width of the washer in my case. Once the panel is removed you should find a plastic rod hanging down from the lock that you pull down on - and then open the door at the same time.
My door lock mechanism went bad on my Bosch washer and I had to replace it - but it did give me a warning (though I wasn't sure what was going on at first). My washer makes a loud noise when locking/unlocking the door - that's the solenoid engaging/dis-engaging. In my case it started making that noise more than just once - first a couple of times, then 3 or 4, then finally about 8 times before it gave up the ghost a week or so later.
There are a bunch of videos online that are generic in nature about how to replace that door locks on front load washers... but essentially you need to remove the retaining spring/wire that is holding the rubber seal onto the washer opening, then peel the rubber seal away from the washer to allow access to the door lock mechanism. Replace and reverse the process.

Feb 22, 2015 | Bosch Washing Machines

1 Answer

Indesit IWD7145K Washing Machine Error code F06 flashing on digital display + all program indicator lights. What does this mean. There is no such error code in the troubleshooting section of the manua


F06 - Door lock fault
Issue: Washing machine door cannot be opened or closed/when the door is closed the machine the programme will not start.
Advice: If your washing machine door will not close, please check for any obstructions in the door lock.
OR,
Switch off the device. Disconnect power. Wait about 3 minutes.
Open the door, then close. Reconnect device to the network.
Start device.

Cause: Door lock fails to close / open door lock triac open / closed,
frequency signal fault

Dado

Feb 12, 2015 | Indesit Washing Machines

1 Answer

GLTF1240ASO Front Door Won't Lock/Close


Most probably your door lock is damaged. You are not supposed to force it open, you have to wait for at least 2 minutes (or till the lock sign is off) after the wash is over to open the door, never force it.
You can just google your model number and search for parts to obtain it. It is quite possible you can change it yourself. See that the line is disconnected from the mains.

Jun 04, 2013 | Washing Machines

1 Answer

Peugeot 407 06 sw front driver's door open (fault)


This will save you loads of money and stress ok. Been using this simple solution for about 18 months and still working. On your lock bar (not door lock) but the u shaped bar that the lock latches onto! on pillow of car. Don't laugh ok ha ha ! just rap electrical tape around bar a few times to make it thicker. You might have to experiment by adding or taking layer of tape off. your door should lock ok and door sensor fault will not appear. "YES" its as simple as that ! Tape will wear but its a 2 minute job to redo and the estimated cost will be 50p lol. three garages told me I need new lock fitted and then the thinking light bulb shon so brite! Hope this works matey, good luck. Gaz from Newcastle on Tyne.

Dec 03, 2012 | Peugeot 407 Cars & Trucks

1 Answer

Malber combo doesn't start


This problem is usually the front door latch "interlock" is not engaging. This is the safety device which keeps you from opening the door and pouring gallons of water on your feet. When you close the door, if the machine DOESN'T recognize it's closed - all electricity is cut off and the machine does nothing. If the machine DOES recognize the door is latched, the latch will lock and you can't open the door (for about 90 secs after you turn it off or unplug it). Does the door LOCK when it's closed? If not, just close it harder several times. A medium "slam" almost always takes care of a "sticky" interlock - and it doesn't hurt anything.

Aug 01, 2012 | Malber WD1000 Front Load Washer/Dryer

1 Answer

Door lock


Switch off. Try some WD40 on the machine lock (not on door) and open & close door many times, to ease out the lock.

Jan 28, 2009 | Hotpoint WMA54 Front Load Washer

1 Answer

Door of washing machine will not open.


Some times, you have to really pull hard to open the door

If no joy, then you have a faulty door lock.

To replace. remove door seal at front, thius will give you access to the door lock.

Nov 18, 2008 | Hotpoint First Edition FEW12 Front Load...

Not finding what you are looking for?
Ariston Technologies AW129NA 16 Lbs Front Load Washer Logo

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...