Question about Fuji FinePix S5000 Digital Camera

1 Answer

Fuji finepix printer qs-7

I have a small piece of paper jammed inside the printer - it's the perforated piece on the end as the paper jammed and I pulled it out.
Can you help? I don't have a manual
E mail address:
shelagh322@o2.co.uk

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello
Send me your email address and I'll email a pdf copy of the user guide (about 4MB)
Col

Posted on Jan 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cants get fujifilm qs7 printer loaded on windows 7


ry ( FQS07SVR)-your missing driver I use it for windows 7 and it works perfectly for my qs-7 printer I posted a step by step also in same thread some time ago its in SysWOW64 inside the windows file on drive c one other person tried it and couldn't get it to work but mine is fine -good luck heres the afore mentioned guide in case its any use
How to Make the Fuji-QS-7 PHOTO PRINTER Work in Windows 7

Finally reconstructed the steps I took to get QS-7 working perfectly in Windows 7 The following is for dummies like me so bear with it
Step 1 connect up printer as normal leave it switched off
Step 2 on the C drive of your computer access the Windows file
Step 3 from the available items listed select SysWOW64 and open it
Step 4 scroll down to the application name FQS07SVR Right click on it and select the option Run as Administrator (if you hover over it with the mouse it shows exactly what it is- the seemingly missing printer driver for the QS 7
Step 5 when you run /install this al you will see is the window that opens when using command line for about 1 second blink and you miss it
Step 6 switch on your printer and allow Windows 7 to do its thing it will tell you after about 20 seconds that the printer is ready and drivers are installed
Step 7 go to devices and printers it may show you 2 entries for the QS-7 one of which is labelled copy 1 and is strangely greyed out- use this one when selecting print from QS-7 in future -GOOD LUCK! and please let me know if you are successful as this is all I did and now my printer works even though Microsoft's engineers and Fuji say it isn't possible.
Disclaimer -This solution offered only to attempt to alleviate the suffering of those left out in the cold by less than helpful technical experts and unsympathetic companies I can in no way be held responsible for anything that might go wrong
But its worth a go .
Another opinion:
The Fujifilm Finepix Printer QS-7printer is not compatible with Windows 7 as per the Fujifilm's website: http://www.fujifilm.com/products/photo_printer/finepix_printer/#faqs However, if you received the driver disc along with the printer, you can install the vista drivers in compatibility mode.
http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows

Apr 26, 2015 | FUJIFILM Digital Cameras

3 Answers

Digital zoom error on an A600, lenz will not retract either


Have you tried spraying a can of compressed air into the lens assembly? All it takes is small piece of debris like a grain of sand to jam up the assembly.

Hope this helps

Jul 07, 2008 | Fuji FinePix A600 Digital Camera

1 Answer

Fuji a500 give "focus error" message and won't shoot pictures


I am sorry to say that this design of lens is the worst i've seen from Fuji.
Focus error relates to the mechanism right at the front of the lens. The motor and drive gear are in the end piece of the lens, as opposed to other cameras that have the focus mechanism in the back of the lens and is easily access able once inside the camera.
Does the lens stick? or buzz on power up? If you tap gently, with your finger nail, on the actual lens on power up ( you may have to do this several times) you may find the lens comes out ok and no error msg is displayed (until you try zooming).This will probably be because something is jamming the gears or the tiny tension spring used on the gears has come off. I have tried to clear several A500's with this problem with limited success.

Jun 23, 2009 | Fuji FinePix A500 Digital Camera

1 Answer

Shutter does not work.


It's not a shutter, but aperture unit is jammed.
Try these: Move lens all the way out and while pressing release button, gently tap on the tip of the lens using something soft/havy like small rubber hammer or piece of rubber.

Apr 16, 2009 | Fuji FinePix E500 Digital Camera

2 Answers

Fuji finepix usb cord


You can check on Fuji.com. It could be a proprietary cable.

Some cameras use what is called a USB D plug. It has regular usb end on one side and a small d shaped end on the other. If that is the cable you need, most electronic stores carry those.

Jun 13, 2008 | Fuji FinePix A330 Digital Camera

1 Answer

Out of Paper


make sure that the paper is kodak xtralife with perforated tabs, otherwise the printer will really not pick it up and if it would - it's gonna be a really bad print

detach all the things that are attached to the printer.
grab a piece of lint-free cloth, wet the other end and leave the other end dry
clean the roller horizontally
use the dry end to dry up the roller and watch for water build ups
have at least 10 photo papers in the paper tray
slide the paper tray back into the printer
plug the printer onto the wall outlet, wait for the initializing sound
put cam to the printer dock
print a picture

=)

Jan 20, 2008 | Kodak EASYSHARE CD33 & Printer Dock Series...

1 Answer

Zoom error message


The higher end fuji's are good cameras. The A345 and A350 are a piece of crap. Low end Walmart cameras.

Oct 29, 2007 | Fuji FinePix A345 Digital Camera

3 Answers

Fuji FinePix A340


your problem seem to be the card reader in the camera body have contact problem, first thing is to ensure is there anything inside the hole where you insert your mem card, second ,try to use contact cleaner to clean up the card reader .hope it help.

Aug 12, 2007 | Fuji FinePix A340 Digital Camera

2 Answers

Fuji S3500 Finepix just stopped working


If you have had it less than a year or even a little over- Fuji may come up with a modestly priced or even FREE replacement,if over and , before you send it to a repairer or contact the Fuji Tech Support team try one more thing. Take the batteries out and with the end of pencil, eraser - give the contacts at bottom the battery chamber a polish. Now take a look at the lid of the chamber if it has a continuous piece of metal inside so as to cover the battery ends put a piece of foil across them if two batteries ,or arrange 2 pieces of foil to replicate the correct alignment if 4 batteries Then close the lid . See what happens - it may simply be a battery contact thing.

Jun 06, 2007 | Fuji FinePix S3100 Digital Camera

Not finding what you are looking for?
Fuji FinePix S5000 Digital Camera Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Digital Cameras Experts

kakima

Level 3 Expert

96683 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Fuji Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...