Question about Linksys Wireless-G Broadband Router

1 Answer

Router problem hello guys, i changed my internet to router wireless yesterday, since that i cant use an application named Texas Poker (Facebook application), i recieve a msg saing that my firewall is blocking port 9339. but when i was using phone internet everything was going perfect. best regards

Posted by on

  • showmanh2000 Sep 04, 2008

    thanks for this help, but it still not working, plz and sorry for wasting your time

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Hi sir,

check your wireless router brand/model and try to take note of it. you should visit www.portforward.com, go to GUIDES then Port Forwarding Guides by Router, browse the brand and model of your router then select your application you want to run(ex. Texas Poker). It has the step by step guide how to porward port 9339.

If not in there, try to do this manually by accessing your router's web configurator, (ex. http://192.168.1.1 in internet explorer address bar). Go to portforwarding menu...just add an HTTP with named Texas Poker, also enter port number 9339 for it's port assignment.

Winsor

Posted on Sep 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok..i used a different laptop yesterday here at my house and the computer asked for the router pin number....put that in and it worked fine...now my ipod touch will not connect tto the internet nor will...


BELKIN ::::



WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Jan 30, 2011 | Belkin Surf N300 Wireless N Router

1 Answer

WHenever i am trying to connect to the internet, it says the network password has been changed. About 3 guys has had access to this property. Is there any way possible that this can be fixed?


First Uninstall the Router Monitor Software from your computer ! as it is the reason for most of the issues with this router

To Setup a new wireless connection follow the steps below

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Dec 11, 2010 | Belkin Wireless Surf Router (F7D2301)

1 Answer

How do i change from having a wire to the modem to wireless


Hello,

Thank you for using Fixya!

In order to go wireless you need to know if you model has wireless capability (ask your Internet provider or from who you purchase the modem). If the modem does not have that capability then get a wireless access point or wireless router (I suggest a wireless router so you can have multiple computer connected to the internet). There are lots of brands out there namely, Linksys, Netgear, D-link or Belkin.

Hope this helps.

Sincerely,

stif_nec


May 23, 2010 | 3Com OfficeConnect Wireless Router

2 Answers

I cant get my router working


    Connect Equipment
  1. Turn off your computer and disconnect the Ethernet cable running from the back of the computer. Plug the cable into the port marked "Internet" on the back of the router. Plug the blue cable included with the router into one of the four LAN ports on the back of the router and plug the other end into your computer Ethernet port. Turn the modem on and wait two minutes. Plug in the router and wait one minute. Then turn on your computer. After two minutes the router should have four status lights glowing on the front panel: power, Internet, wireless and LAN.
  2. Configure Router
  3. Open your Internet browser on the computer. The router will automatically display the Smart Wizard configuration page. Click "OK." On the next page, enter the region where you are located and your wireless networkmag-glass_10x10.gif name (SSID). The default is "NETGEAR," but you should change it to a different name you can easily remember. The name is case-sensitive. Click "Next." Then click "Done."
  4. Configure Computer for Wireless Access
  5. Go to "Start" and click on "Control Panel." Open "Network Connections" and right-click on "Wireless Network Connection." Select "Properties." Then select the "Wireless Networksmag-glass_10x10.gif" tab. Check the box to use Windows for network configuration, then click "Add..." Enter the same SSID name that you entered when you set up the router. Select "Disabled" for data encryption as that is the router default setting. Click "OK." Now try to connect to an Internet website to verify connectivity.
  6. Router Logon
  7. To log on to your router, go to Routerlogin.net. Enter "admin" for the user name and "password" for the password. On the router home page, go to "Set Password" and change the router password. Then choose a security protocol to use that is compatible with your computer's wireless adapter. WPA-PSK is the best choice if your wireless adapter supports it.

Dec 14, 2009 | NetGear WGR614 Wireless Router

1 Answer

Cant access facebook website..the only website i cant access all week. i type www.facebook.com and nothing happens but the bar at the bottom of the screen loads half way and thats it. Using Vista and ie8...


hmmmm..... try this.... in i.e8 go to tools>internet options>>>connections>>>lan settings>>check "bypass proxy...." now advanced...in exceptions put write 127.0.0.1

now try...

if this doesnt work ull have to install a software name "your freedom" .... install its latest version cuz ur gonna face updation probs. otherwise

Nov 20, 2009 | NetGear WGR614 Wireless Router

1 Answer

Will not connect to internet. no drivers in computer


The WRT54GS router from Linksys is a wireless-G broadband router. This router lets the user access the Internet through a wireless connection as well as use it to share resources among computers on the network. The Linksys WRT54GS comes with a CD-ROM, which will run a Setup Wizard to walk you through configuring your router. Without the CD-ROM, configuration can be done through the router's web-based utility.
  1. p 1 Launch your web browser, then type 192.168.1.1 in the address field. Press "Enter". On the password screen, leave the user name blank. Use admin for the password. Click "OK".
  2. Step 2 Select the appropriate Internet setup settings in the Setup>Basic screen. Many of these settings are obtained from your Internet Servicemag-glass_10x10.gif Prvider (ISP). Other than the settings obtained from your ISP, the default settings should work for most network applications. Set the time zone in the "Time Zone" field. Click "Save Changes" before navigating away from this screen.
  3. Step 3 Select the appropriate wireless standard from the drop down menu in Setup>Basic Wireless Settings. If in doubt as to your wireless standard, leave the default selection at "Mixed'. This will work for most network applications. Type a name for the Wireless Networkmag-glass_10x10.gif Name. This name must be identical for all wireless devices on the network. Click "Save Settings" before navigating away from this screen.
  4. Step 4 Select the appropriate security method for your wireless network in the "Wireless>Wireless Securitymag-glass_10x10.gif" screen. If you do not wish to utilize security, leave the default setting of "Disabled". It is recommended to use some form of security for your wireless network. Whether you use WPA or WEP security, all devices on your wireless network must use the same encryption method and encryption key. Click "Save Settings" before navigating away from this screen.
  5. Step 5 Reboot the router so all the changes take effect.

Nov 14, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

I have netgear router mr814, my friends can connect to the router with 2 pc, but i cant, i am ably to connect to other wireless networks but not to mine... when there is no password on i can conncet but...


If you have windows XP then perform the steps below:

1. Right click on My Computer icon and go to Manage.
2. Go to Services then go to Service and Applications.
3. Double click on Wireless Zero Configuration.
4. Change the Start Up Type to Automatic and click on Apply.
5. Click on Start and press OK to close the window.
6. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
7. Right-click on the wireless Network Connection icon and select 'Properties'.
8. Go to the 'Wireless Networks' tab.
9. Check the option 'Use Windows to Configure this Wireless Connection' and click 'OK'.

Now please perform the following instructions to connect to the wireless network:

1. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
2. Right-click on the wireless Network Connection icon and select 'Properties'.
3. Click on the 'wireless network' tab.
4. Under Preferred networks if you see any name in the list then highlight the name and click remove.Click OK.
5. Right-click on the wireless Network Connection icon and select 'View Available Networks'.
6. Look for the SSID (aka Network Name) of the Wireless router or access point.
4. Highlight the SSID from the list that you want to connect to.
5. Type the security Key here and click on the 'Connect' button.
6. You should have successfully established a wireless network connection.
You can visit the link below to follow the steps in case the issue occurs

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest
FixYa rating. If you cannot rate this post with the highest rating, then please
comment to this post and I will try to help you further.

Regards
Anand

Sep 10, 2009 | NetGear MR814 Wireless Router

1 Answer

Cant get my router to work


Connect the computer to LAN port one of the router using an Ethernet cable, access the configuration page (ie 192.168.1.254), configure the router as Dynamic IP, Configure the wireless network as (WEP or WPA), Check the IP address of the WAN section.

Note: If you have an IP address to the WAN section the Internet connection is working, Connect through the wireless network by finding the wireless network name was been created to the router.

Mar 09, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

No access to texas holdem poker game on our computer.


You need to set up "Port Forwarding" on the router. 9339 is the port you said you needed open.

http://192.168.1.1
This will prompt you for your router password. Default password is a blank username and a password of "admin".

Once you are into the configuration menus click on the "Application and Gaming" tab. This is where you add permissions to use port forwarding.

In a nutshell, pick the port you want open in the "start" and "end" fields. Leave the protocol at "both". Enter the last 3 digits of your "computer's" IP Address and select the "enable" check box.

To find your "computer's" IP, open up a cmd prompt by;
XP: Windows Icon (bottom left of desktop) and select "run". Type in "cmd" (without "'s) and hit enter.
Vista: Windows Icon (bottom left of desktop) and type "cmd" into the search bar then hit enter.

Once you have a cmd screen open type type the following minus the "'s.
"ipconfig"
Look for an entry that looks like 192.168.1.100, it will be labeled as IP** Address. The last 3 numbers of that address are what you want to enter in to the port forwarding configs.

After you are all done, click on "save settings" and that program should now have unrestricted internet access.

Dec 28, 2008 | Linksys Wireless-G Broadband Router

1 Answer

I cant connect to wireless on my brand new laptop :(


you need to make sure that your laptop has a wireless card in it and if it's working properly. if it has a wireless card already, the wireless card should automatically detect your wireless router (the wireless icon is usually located at the bottom right hand corner of your screen) and you just need to connect using the correct wireless settings (ssid and wireless security).you need to also check if the wireless capability of the router is enabled. make sure to check if the wireless light on the router is on.

here are the steps on how to check the wireless settings of the router

- open a web browser using a computer connected to the router via cable. enter http://192.168.1.1 on the address bar.
- it will prompt you to enter a username and password, use "admin"
- it will now promt you with your router's screen, go to the wireless section
- check the wireless settings like the wireless name/ssid that are listed there since that would be settings that you need to use on your laptop (note: you can change the wireless name/ssid to something that you can remember easily and just saev the settings)
- check also the wireless security if it's enabled

hope this'll help you

ciao!

Aug 28, 2008 | Gateway Wireless-B Router (wbr-100)

Not finding what you are looking for?
Linksys Wireless-G Broadband Router Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...