Question about Kenwood Car Audio & Video

1 Answer

I recently purchased a kenwood KDC-MP208 and am having difficulty setting it to display the time.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 100 Answers

First, set the clock if it isn't already set. You need to get your cd player into standby mode and then hold the "boost" button. This should get you into a menu. Use the up and down pad to scroll through the options until you find "clock" hold the center button to get into the mode, to set the clock. Once in use the up and down, left and right pad to set the time. Then press the menu button to get out. Press the source button to get back into a normal mode, then hold that "boost" button again. This should bring you into a different menu. scroll through the menu until you see "display" and you should be able to choose to display clock in there. I hope I didn't steer you wrong. Let me know if you need further help. Good luck
-Andrew Hawkins

Posted on Sep 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How Do I Set My Clock on My Kenwood KDC-MP208?


1:- Select Clock Adjustment mode Press the top or bottom side of the Control knob. Select the "ClK ADJ"/ "ClCK" display. 2:- Enter Clock Adjust mode. Press the centre of the Control knob for at least 1 second. The clock display blinks. 3:- Adjust the hours. Press the top or bottom side of the Control knob. Adjust the minutes Press the right or left side of the Control knob. 4:- Exit Clock adjustment mode, Press the [B.BOOST] button.
Now whats the time, Gotta get my tea.
Regards, Dave

Mar 20, 2011 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

I have kenwood car mp3 mp208 how i set clock?


See page 11: http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/kdcmp238.pdf

Mar 14, 2011 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

Kenwood kdc-mp208 stuck in ''protect'' mode....


Protect indicates that there is a short or a grounding problem usually within the speakers2_bing.gif or the speaker wiring. Locate and press the reset button (pinhole). If protect comes back then disconnect all speakers, reset and connect them back one at a time until protect shows up again. This will help you find out where the unwanted DC signal is coming from. If protect shows up when all speakers are disconnected, then it may need service.

Apr 10, 2010 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

Set clock on kdc-mp208


Here's the owners manual for your KDS-MP20, from the kenwood-usa site:

http://kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/kdcmp238.pdf

The following is found on pages 10 and 11 of the manual:

1. Enter Menu mode
Press the [B.BOOST] button for at least 1 second.
"MENU" is displayed
2. Select the menu item
Press the top or bottom side of the Control knob.

"CLK ADJ" can only be performed when in Standby Mode

----------
Manual Clock Adjustment

1. Select Clock Adjustment Mode
2. Press the center of the Control knob for at least 1 second
-the clock display blinks
3. Adjust the hours
Press the top or bottom side of the Control knob.

Adjust the minutes
Press the left or right side of the Control knob.
4. Exit Clock adjustment mode
Press the [B.BOOST] button.

----------
I hope that helps.

Mar 27, 2010 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

I have a 2000 Mercury Mystique. I am trying to


There is a good chance that your car has a factory amplified system, it may say premium on the speaker covers if it does. Check to see if you hooked up the bue and blue white wires in the adaptor harness. The blue wires in the adaptor harnesses are to turn on the factory amp.

Aug 16, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

No remote wire?


On the remote wire of the stereo always be a blue one

Aug 16, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

Kenwood KDC-MP208 Clock Set


Make sure that the source is set to "Standby" when trying to access the menu. It took me about an hour to figure it out and afterward I felt like a ******.

Apr 09, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

2 Answers

Kdc-mp208


This is usually ground problem. check ground wire

Feb 14, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

No AM radio?


Try pressing down on the directional pad located on the right side of the stereo, this should bring you to the AM setting. If that doesn't work, make sure you have the proper antenna cable installed as well as the proper wiring harness.

Feb 10, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4748 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...