Question about Epson LX-300 Matrix Printer

1 Answer

Epson fx2175 when i turn on my printer the head moves to the left and just stay there with a beeping sound, and all the lights on the control button continiously blinks.. thanks

Posted by on

  • khalantiao Oct 26, 2008

    i have the same problem with my fx2175 and i already clean the sensor and test it, it works fine but the problem is still the same is there other options i could check thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Check the sensor near the gear box on the left side and clean it with contact cleaner. Make sure that sensor will swing back and stay at the center. If the problem persist you better replace the sensor.

Posted on Oct 06, 2008

  • Hingu vikram Ashok Bhai

    my fx2175 and i already clean the sensor and test it, it works fine but the problem is still the same is there other options. pls give me other solution

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My epson fx2175 keeps on beeping continuesly what can i do to resolve? head was stop after beep


Go To Below official EpsonPrinter Page For Your problem,https://files.support.epson.com/htmldocs/fx890_/fx890_rf/troub_1.htm Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For Epson Printer Support

Mar 25, 2014 | Epson Fx Office Equipment & Supplies

1 Answer

My epson fx2175 keeps on beeping after initializing when i turn it on


check if paper in inserted correctly, the paper sensor might be broken.

check where the paper goes in, in the back.

Apr 14, 2011 | Epson FX 2170 Matrix Printer

2 Answers

EPSON FX 2175 always printing JL 1284.4 @GJL


sometimes the printer head is locking/stopping at the right side

Dec 11, 2008 | Epson LX-300 Matrix Printer

1 Answer

C43sx both lights on


ok...start by removing the drivers from control panel, go to website and get new drivers, install them, try it again.

http://tinyurl.com/6qcpgy

Jun 11, 2008 | Epson Stylus C43SX InkJet Printer

1 Answer

Epson c43sx does not print


It is possible that the ink cartridges in your printer (especially applicable if you are using refilled or compatible carts) can not be read by the printer. Some compatible cartridges have a failure rate as high as 30% and so it is very possible that the machine either does not see the cartridges or can not read them.

Replace the cartridges with genuine Epson ones and try again. The genuine ink will also help to clear any hardening cheap ink in the print head.

Apr 02, 2008 | Epson Stylus C43SX InkJet Printer

3 Answers

Epson c43sx does not print


change the cartridge thats simple red light indicating you must change your catridge

Apr 02, 2008 | Epson Stylus C43SX InkJet Printer

4 Answers

C43sx both lights on


If your PC is connecting to it normally (no connection errors), it sounds like you printer is having the service reset hardware problem. Try installing the EPSON reset software and check all counters and error codes.

Try this one which fixed mine:

http://www.ssclg.com/epsone.shtml

Good luck...

Nov 15, 2007 | Epson Stylus C43SX InkJet Printer

3 Answers

Beeping Epson lx300


The scanner rail (silver round bar running width if printer that head with ribbon runs on) can get dry making head stop, lube with light machine oil.

Canalso be from a faulty ribbon, the ribbon is driven when head moves and if riibon gets stuck head stops toooooo, remove ribbon and ensure you can turn it by hand easierly, replace ribbon...

Nov 11, 2007 | Epson LX-300 Matrix Printer

Not finding what you are looking for?
Epson LX-300 Matrix Printer Logo

534 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18355 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Cindy Wells

Level 3 Expert

4883 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...